Different Swisstool plier heads , the truth
-
Scrappy the models with smaller plier heads and round corkscrew hole WERE production models and not prototypes , there are many of these models in circulation , I have one that has no hard wire notch in the cutters which makes it a really early one.
I've always preferred the 98 plier head, it opens and closes with more resistance.
Dunc
-
I am sorry Dunc. I didn't mean to say they were never production models. I meant the recent photos of the old plier with the new handles and sheepsfoot blade are not a production model. They are just stock photos. The current production model looks just like the pic wave180 shared.
Older models pre 2002 did use the smaller plier. I carry one as an edc often. Thanks for helping clarify my statement. -
Sorry Scrappy I miss understood you , havnt had my coffee yet

-
@scrappy said:
Mine looks like that too. I am sure that is the most recent. The photos showing the smaller plier head are from prototypes and are not production models. One way to tell that is by looking at the corkscrew adapter. If the photo has a circle it is not a production model. If it has a squiggly triangle to connect the corkscrew, it is a production model.
I have said this before. I spoke with a current dealer and this plier head is the current model being shipped to dealers.You just made me a very happy man. That's awesome news that the New Swisstool with the sheepsfoot serrated blade still has the larger pliers

-
I just received a brand new silver SwissTool that looks as the one below with one more change - there is no shield embossed on the pliers head anymore. The pliers head is blank (although nicely machined) on both sides. Standard SwissTool, sheep foot serrated blade as the one in the pic. Very nicely built otherwise, no blade/tools play (usually associated with the SwissTools), thight and smooth at the same time.
Few weeks ago I got a BO variant of the same SwissTool standard model from Tim (Tim, if you read this:
!) and that one looks exactly as the one in this pic, the embossed shield included, just in all black. -
Swiss Tool Black plier heads with Blasting Cap Crimper

-
Very nice Melvin
And congrats, those with the cap crimper are not seen very often. :) -
@Melvin Sjardinal said:
Swiss Tool Black plier heads with Blasting Cap CrimperOhh,nice one Melvin.. 8) 8)
-
Does anyone have a Victorinox catalog pic of the 1998 Victorinox SwissTool X set which also included screwdriver bits, the "L" shaped bit drive bar, and nylon case that holds all?
-
@Marius said:
I just received a brand new silver SwissTool that looks as the one below with one more change - there is no shield embossed on the pliers head anymore. The pliers head is blank (although nicely machined) on both sides. Standard SwissTool, sheep foot serrated blade as the one in the pic. Very nicely built otherwise, no blade/tools play (usually associated with the SwissTools), thight and smooth at the same time.I recently bought a new Swisstool Spirit RT "Road Tour Edition", and then about a week later, I bought two more from a different seller. The first one I received has the little Vic logo etched on the pliers head, but the other two that I received do not have the logo. Instead they'er just machined smooth. I wonder how many of the Spirit RTs have the etched Vic logo on the pliers head as opposed to without the etched logo?
-
Here is a pic of the three Spirit RTs that displays the one with the small Vic logo etched or engraved on the plier head, and the other two without the logo.

-
-
@wave180 said:
This might clarify some things. This is my brand new Swiss Tool, no more red paint, plier head is the same as the 05 version with a cross and shield stamp. Also, this is the regular Swiss Tool with sheep foot style serrated blade.I too have this one with the sheepfoot style serrated blade, no red on handles but NO shield stamp on pliers head!
@burnside - I too have two of the RS and neither have any shield stamp on them. Both smooth!
I also have a Swisstool with the scissors that has a shield and Victorinox stamp on one side. It also appears that the pliers head is not as stubby as the one with the sheeps foot serrated blade.
Too many variations and I wish they would stop. Just make them one way. Any idea of production dates for the ones I have? :D
-
I can't compare them anymore because I sent the two RTs with smooth plier heads and no logo to Thunderpants this afternoon, but I just noticed in the photo that the one with the logo on the plier head looks a little wider and less slim than the other two. I wish I could compare them still, but like I said, it's too late for that.

-
@burnside said:
I can't compare them anymore because I sent the two RTs with smooth plier heads and no logo to Thunderpants this afternoon, but I just noticed in the photo that the one with the logo on the plier head looks a little wider and less slim than the other two. I wish I could compare them still, but like I said, it's too late for that.
I noticed that too in the pic but thought maybe it was just an illusion! LOL
-
Great thread!!
-AdmSlc
-
Does anyone know if manufacturing is subbed out to various shops or all manufactured inside one Victorinox plant? This could lead to variations, and some of these stamping variations could be internal codes to indicate the specific production source. A full "Victorinox" label is one thing because it looks like it's cast into the piece, but the little Swiss crosses look rather like a stamp applied afterwards to an item that has passed quality control. All of this is common in manufacture of many tools and such.
Also, there's a thing that's very common in Europe called a "lunch-box" product. Assembly-line workers in the factory get to take parts that may have minor defects (like two jaws that don't pair up adequately, although if a worker sorts through a rejects bin he can find two that do work just fine) and spend their lunch hour making a couple units for family and friends. Inevitably some guys make a bunch that they sell on the side. They won't necessarily have any QC stamps but you never really know.
-
Welcome to the forum, lanedecamp.

As far as I know all the Victorinox tools are from Ibach, Switzerland. Only part that's outsourced is the corkscrew, and that comes from Trier, France.
The little shield was an addition to the Spirit plier head, my newer Spirit has it too, the older one doesn't.
-
@J-sews said:
Just added this info to the Encyclopedia. Scroll down to the bottom of the SwissTool page HERE and click on Dunc's plier head picture.Bob
Excellent information - thanks!
One small point, if I may (definitely no offence intended!). The notes for the diagram say, "Note that the advantage of the new plier design only comes into play when the jaws are positioned perpendicular to the bolt head, not parallel".
I found this a little unclear at first and think that any confusion might be avoided by saying, "Note that the advantage of the new plier design only comes into play when the long axis of the pliers is coincident with the long axis of the bolt".
Ken
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

