And so it begins.... (My adventures into Alox!)
-
Oh and absolutely yes buying the donors is what makes modding expensive.
You know you are heavily into it when you buy 25 compacts at a time. :D They are a great scissors source though. You get scissors and a combo tool, and then the plus scales with all the goodies.
Those with weak stomachs might want to look away. These are lined up for slaughter tonight. I shall fashion a trophy necklace from all the corkscrews! Like the savage SAK hunter from the jungle!



-
Happy Compact slaughter, Robert! >:D
-
Be gentle... :P
-
Can I has the necklace?
:P
-
I don't get why he said it was too big/heavy for EDC. I'd happily carry that beautiful beast!

-
At least those Compacts' deaths will not be in vain. Have fun Syph :D
-
thank you very much to both appreciate the help

it is true, I had not noticed before ... thanks for warning
a general question you can find tools and shells individually?
or the only way is to buy several knives to retrieve tools and parts?Yes, the only option is to buy several knives and get the tools you need from them. One of the reasons why custom work is expensive.
Also, welcome to the forum.

Thanks mate.
My first problem, I can't find pivot barrel here, can anyone help me to find it (I need to buy in Europe, because shipping from usa it's a nightmare... )
Every help is appreciate.
Inviato dal mio HUAWEI U8815 con Tapatalk 4
-
You should ask in the wanted section if anyone is willing to forward some pivots/barrels your way - I have yet to find a European Mailorder that carries a sufficient selection of Knifeparts.
-
Well the surgery was successful. It took longer than I figured, about 4 hours all in. I used to just hold them on my grinder and grind off most of the back liners and bushings and take them apart in a few minutes, but now I want to save the bushings and liners so I drill them out and gently tap them apart.
Here they are all naked.

I didnt damage any bushings, so I have all 150.. well I should say 149. One was missing a bushing from the factory on the inside pin. This is the second time Ive discovered a missing bushing.

And here are the money parts. Scissors and combo tools! Ive done very few mods that didnt have scissors. Everyone loves Vic scissors.

-
thank you very much to both appreciate the help

it is true, I had not noticed before ... thanks for warning
a general question you can find tools and shells individually?
or the only way is to buy several knives to retrieve tools and parts?Yes, the only option is to buy several knives and get the tools you need from them. One of the reasons why custom work is expensive.
Also, welcome to the forum.

Thanks mate.
My first problem, I can't find pivot barrel here, can anyone help me to find it (I need to buy in Europe, because shipping from usa it's a nightmare... )
Every help is appreciate.
Inviato dal mio HUAWEI U8815 con Tapatalk 4
If you want I can hook you up with a modding kit. You need pivots and also a carbide bit for the holes. You must have a drill press though, it's a requirement to use the bits I have. Ive been using ball nose carbide milling bits to drill the holes, and the parts must be clamped and drilled at precise perpendicular angles, with plenty of oil. The bits are $10 each, and the pivots with screws are $2 each. International shipping for that would be $6.
Cheers,
Robert -
That's very kind of you Robert to help others out with their mods.

-
I can only second that - He is an outstanding craftsman - If not by trade so at least by passion - and a really nice guy.
He sent me some Pivots and 2 drill bits a while back and I finally have an old Alox knife to try them on... -
@Syph007 said:
If you want I can hook you up with a modding kit. You need pivots and also a carbide bit for the holes. You must have a drill press though, it's a requirement to use the bits I have. Ive been using ball nose carbide milling bits to drill the holes, and the parts must be clamped and drilled at precise perpendicular angles, with plenty of oil. The bits are $10 each, and the pivots with screws are $2 each. International shipping for that would be $6.Cheers,
RobertI thank you very much for your very kind offer,
I appreciate that the problem is the shipping .. if you send from canada may never come!
I'm having big problems with the Italian customs.
I already have the drill press (the tips I own are in millimeters not inches, so if the pivot are in inches should I look for a tip from 1/8)
however I can see some pictures of the tools that I've described to understand better?thank you very much
-
If you want I can hook you up with a modding kit. You need pivots and also a carbide bit for the holes. You must have a drill press though, it's a requirement to use the bits I have. Ive been using ball nose carbide milling bits to drill the holes, and the parts must be clamped and drilled at precise perpendicular angles, with plenty of oil. The bits are $10 each, and the pivots with screws are $2 each. International shipping for that would be $6.
Cheers,
RobertI thank you very much for your very kind offer,
I appreciate that the problem is the shipping .. if you send from canada may never come!
I'm having big problems with the Italian customs.
I already have the drill press (the tips I own are in millimeters not inches, so if the pivot are in inches should I look for a tip from 1/8)
however I can see some pictures of the tools that I've described to understand better?thank you very much
Ive shipped to Italy more times than I care to think and have yet to have one missing :)
-
If you want I can hook you up with a modding kit. You need pivots and also a carbide bit for the holes. You must have a drill press though, it's a requirement to use the bits I have. Ive been using ball nose carbide milling bits to drill the holes, and the parts must be clamped and drilled at precise perpendicular angles, with plenty of oil. The bits are $10 each, and the pivots with screws are $2 each. International shipping for that would be $6.
Cheers,
RobertI thank you very much for your very kind offer,
I appreciate that the problem is the shipping .. if you send from canada may never come!
I'm having big problems with the Italian customs.
I already have the drill press (the tips I own are in millimeters not inches, so if the pivot are in inches should I look for a tip from 1/8)
however I can see some pictures of the tools that I've described to understand better?thank you very much
Any 1/8 carbide bit will work. These are what I have been using.

I figured on your side of the ocean imperial sizes would be hard to come by. Ive sent 2 things to italy before and they made it. But I always asked the reciever if they had any problems getting packages and both said no issues. Do you have lots of issues with packages not showing up?
I just ordered another 200 pivots today, so I will have lots on hand. I get them at a decent rate with a big order, even though shipping is still alot for me, still $32 to ship those to Canada.
-
ouch! $ 32 to ship it's too much!
ok, let's see if they arrive in Italy.
the pivot and screws are these?
http://www.knifekits.com/vcom/product_info.php?cPath=60_83&products_id=471
http://www.knifekits.com/vcom/product_info.php?cPath=60_81_230&products_id=1248maybe you can send me a pair of these?

maybe we continue pm
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






