Inline Awl
-
@Syph007 said:
Ah so in place of where the small blade normally is?It's too thick of a part to just drop in. I actually put one on an 84 before, and it was a royal pain to get it to fit right. Since the rim of the awl needs to mate just right to the top of the back scale. Maybe you'd get lucky and it fits a 91mm better. The keyring spacer part would have to be thinned down to accommodate it though. I had to do that as well on the 84mm mod I added it to, and move the pivot hole. That was a huge pain. :D
I'll be in the shop in a few hours and I can measure it up for you then and see if it would fit a 91mm without a ton of headache.
The awl fits a 91 pretty good

-
@Syph007 said:
Ah so in place of where the small blade normally is?It's too thick of a part to just drop in. I actually put one on an 84 before, and it was a royal pain to get it to fit right. Since the rim of the awl needs to mate just right to the top of the back scale. Maybe you'd get lucky and it fits a 91mm better. The keyring spacer part would have to be thinned down to accommodate it though. I had to do that as well on the 84mm mod I added it to, and move the pivot hole. That was a huge pain. :D
I'll be in the shop in a few hours and I can measure it up for you then and see if it would fit a 91mm without a ton of headache.
Thats very kind of you to look for me Syph
as you know I like 'Lego' type mods :DAlso I would like to loose the keyring and add a bail (I think my farmer has gone in to hiding
)This 'modding' ain't as easy as it looks

-
Nice Steve, I forgot you had done that!
-
Thanks Steve, you slipped that in when I wasn't looking

Is it an easy job? I'm keeping my fingers crossed its a plug and play job :D
@ Mark,
More rust in the carboot thread for you Mate ;) -
93 and 91 have different sized pivots, so you'll either have to bush the awl pivot or drill out the other pivots so they match.
-
@Cupboard said:
93 and 91 have different sized pivots, so you'll either have to bush the awl pivot or drill out the other pivots so they match.You could be lazy too like Vic does. :D They use the electrician blade and pruner on the large XLT with a large pivot and dont bother to remake the part or use a bushing.
Half a mm in diameter isnt too much I guess. I would probably use a bushing though as it would bug me.
-
@sparky415 said:
If I don't get my drills mixed up:D
Our general use drills are kept in three buckets by the pillar drill. Large, small and blunt.
-
For this one I just put it in. Not that much different between 2.5 and 3.0mm. But I did use a different spring, a old style mag glass if I recall correctly.
-
-
Thanks Samek,
More great infomation

-
That's a great idea!
-
How is it going?
Sent from my Hudl HT7S3 using Tapatalk
-
This job is on the backburner at the moment
I'm slowly getting there but I've been busy on another little project lately -
-
-
-
-
Great job

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


...

















