New PST
-
There still seems to be a lot of modelling based on inboard tools here. I must be in the minority wanting tools to be outboard. In fairness some tools matter less than others - drivers for example. Knife blades and saws still belong on the outside of tools. Even the Octane, Juice, Wingman and Sidkick could make the differentiation (although the Wingman and Sidekick made the wrong tools lock
). Outboard would make for a much better tool IMO - a refined version of the Bear Jaws (non-locking) with scissors - I could probably cope with that :D -
I think what we're asking for is a tool that filled tim leathermans original brief, a pocket knife with pliers. When the kick was discontinued leatherman no longer sell such a tool. For me, pocket knife with pliers = non locking blade, a few essential tools, slim and light enough to be carried in the pocket. In fact the sideclip is probably the greatest expression of this idea! Bring back the Sideclip!!! :ahhh
-
@Philby said:
I think what we're asking for is a tool that filled tim leathermans original brief, a pocket knife with pliers. When the kick was discontinued leatherman no longer sell such a tool. For me, pocket knife with pliers = non locking blade, a few essential tools, slim and light enough to be carried in the pocket. In fact the sideclip is probably the greatest expression of this idea! Bring back the Sideclip!!! :ahhhYes!
yes!
Bring back the Side...wait,hang on
-
Doesn't the Skeletool sort of fill the hole left by the sideclip? Or at least tries to. With those pitiful pliers and terrible ergos it doesn't do a very good job.
-
This is getting more and more interesting

My starting point in this was returning to a hybrid PST as my work EDC. I've been enjoying the light weight,optimal tool load,with reasonable ergo-dynamics.
Could it be that the market has changed,and we don't want 'simple' tool anymore?
It's also been very interesting that people don't seem to want an evolution,either extinction or stasis!
Also interesting that twenty one people have offered a pro-PST opinion in the poll,but only ten people have put a name to the petition

-
@Philby said:
I think what we're asking for is a tool that filled tim leathermans original brief, a pocket knife with pliers. When the kick was discontinued leatherman no longer sell such a tool. For me, pocket knife with pliers = non locking blade, a few essential tools, slim and light enough to be carried in the pocket. In fact the sideclip is probably the greatest expression of this idea! Bring back the Sideclip!!! :ahhhNooooooo!!! :ahhh :ahhh :ahhh
Tried the Sideclip - got rid.
Tried the Skeletool - got rid.
Tried Zillatool Jr - got rid.
Tried OCTANE - was very happy!@kirk13 said:
This is getting more and more interesting
My starting point in this was returning to a hybrid PST as my work EDC. I've been enjoying the light weight,optimal tool load,with reasonable ergo-dynamics.
**
Could it be that the market has changed,and we don't want 'simple' tool anymore?**It's also been very interesting that people don't seem to want an evolution,either extinction or stasis!
Also interesting that twenty one people have offered a pro-PST opinion in the poll,but only ten people have put a name to the petition

I like simple, lightweight and optimum
I just want it to be outboard, ergonomic, and with decent scissors(In other words NOT a PST :P)
-
Not a PST
Not a back spring Phillips
Has to be a slippie
Pickie,pickie,pickie


-
Correction: *Enlightened *pickie, pickie, pickie :D :D :D
-
I think the real issue is that all of us will not agree on what is the perfect tool load out. Simple tools? I like simple tools. What is simple to me is maybe not simple to you though. The core reason that I like SAKs and MTs is because they offer multiple functions. As such, I want maximum load out for the size. I have certain tools that I see as must have. The ST200 was the first tool that met that for me. So it is the benchmark. Anything less is incomplete.
I don't use scissors much, and if I do I'd rather have a SAK. But.. If you can fit some on there, I'd prefer that you do. If it means I have to lose something else for it, or carry it off board ala Surge.. Forget it.
I don't use a file too often, but when I need one, there is no substitute.
I must have a saw. Seems like many of you do not.
Aside from pliers, I personally think the basic load out in order of need is: PE blade, saw, drivers with reach, awl... Then the rest I still see as essential, but rarely truly needed.. SE blade, file, scissors (can live without though), openers.
If I had to guess though, about half of you would claim that a saw is useless, you need scissors every day, and files get used constantly. I don't know what it is you guys are doing that require those priorities (your nails I always assume?) but it illustrates my point.
If the tool that fills the role of "pliers drivers knife" is rubbish, then there lies the problem. We don't need a PST, we need a better option in that category.
Seems like there are many tool load out options from Leatherman though. To expect the perfect one in a manner that has only what YOU want and naught else is a bit much to ask I think.
-
Rust in peace.
I would be behind a blades mini. Flat drivers maybe.
-
Rust in peace. tom.
-
Wow, I'm actually agreeing with an Al rant for the second time in less than a week.....
:P I say rust in peace. -
I can't help think, respectfully of course, that some of you have lost the plot.
The PST was a survival tool, designed to be carried a lot but only used as a last resort in an emergency. It wasn't a tool that Tim Leatherman expected everyone to use in their garage while ignoring the roll away tool chest with $10k of tools inside that's standing 5 feet away. Using it all day for all tasks is kind of like using a magnesium fire starter when you've got a butane lighter in a a drawer in the next room.
Used in that regard it was an excellent tool, I carried one for years and there were many times I was thankful I had it, but if there was a real screwdriver, knife or pliers handy I'd use them over the PST every time. Heck, I'd use my SAK over the PST most of the time if I didn't need pliers. If that's what we're looking for used PST and PST II's are easily obtained.
It was us, the multitool fanatics that changed it from a survival tool to an every day user. Do any of us really want, other than for nostalgia purposes, another "survival" tool? Because if we're trying to create a new PST that's a great every day use tool I think Victorinox already did that for us with the Spirit.
And do any of us think Leatherman can improve upon the Spirit? With their current management and QC? I don't.
Rust in Peace
Just my $0.02.
-
Do not RUST IN PEACE!!!
-
@3rdpig said:
I can't help think, respectfully of course, that some of you have lost the plot.The PST was a survival tool, designed to be carried a lot but only used as a last resort in an emergency. It wasn't a tool that Tim Leatherman expected everyone to use in their garage while ignoring the roll away tool chest with $10k of tools inside that's standing 5 feet away. Using it all day for all tasks is kind of like using a magnesium fire starter when you've got a butane lighter in a a drawer in the next room.
Used in that regard it was an excellent tool, I carried one for years and there were many times I was thankful I had it, but if there was a real screwdriver, knife or pliers handy I'd use them over the PST every time. Heck, I'd use my SAK over the PST most of the time if I didn't need pliers. If that's what we're looking for used PST and PST II's are easily obtained.
It was us, the multitool fanatics that changed it from a survival tool to an every day user. Do any of us really want, other than for nostalgia purposes, another "survival" tool?
I think this actually hits a lot of good points. But I think the MT, though evolved, is still what is has always been. At least in my application anyway.
I personally use a MT for solving minor daily annoyances where there is no significant benefit to grabbing the "real" tool or it is simply not available. Convenience is a factor there too for sure. I also rely on it for emergencies (survival if you like). And like many people, I like MTs for travel/hiking/camping/outdoor pursuits where weight is a factor and taking real tools with me is just not practical.
These things all encompass the concept of an EDC tool for me. So "survival" in my case, and the modern case I suspect, is really more about EDC. In that respect i think Tim chose a poor word to attach to the tool. I do not use MTs to take an engine apart, but I may use one to fix an engine in the middle of nowhere. So the spirit of the idea remains even if the term "survival" never really suited the concept.
I doubt Tim ever considered all of that, though it would have been difficult for him to ignore the fact that SAKs already existed and filled that role. Are SAKs all about "survival", or appropriate daily use mixed with limited emergent capability?
So clearly his engineering concept of folding pliers was what made it unique, not the multi function aspect. Multifunction had been done already and done very well by Vic. The pliers... The fold away pliers was the new idea.
I think given this, it was inevitable that the pliers MT would evolve to include more and more functions. The platform just isn't as easily customized as the SAK platform. So in order to target the most buyers, you gotta add the kitchen sink, or produce tons of models.
So while Tim did have an original concept, it was based on his personal needs at first.. then it evolved when other people wanted one.
If the PST had just the right tools for you personally, that's great! Buy one! But don't expect an upgraded version of such a limited and specific toolset. I'd say LM tried that with the Fuse, Kick, Blast. It must not have been a good business model or you'd still see it.
And speaking of Vic, nobody complains about the tool sets in their plier MTs. Packed with tools, no complaints. Yeah, they offer blade/scissor options. Other than that, where's the half thin Spirit with a blade, a file, a can opener, and some drivers? There isn't one.
The pliers MT model drives itself toward maximum tools thus maximum appeal to as many buyers as possible.
I predict that models with limited tool sets will not be produced in traditional forms any longer. Skeletool as an example. Better to design a MT around a limited tool set from the get go than have stripped down tools with spacers or seventeen different handle toolings for each model so that everyone can get one with only what they want and nothing else.
-
Let it die.
I wouldnt mind seeing them re-introduce the pulse though. From where i'm standing, it seems like the ultimate EDC. Slim, light, locking tools. I know a lot of people will say to get a rebar, or fuse, but i think both of those are still thicker and heavier than the pulse(could be wrong)
All the pulses i see on ebay are either outrageously over-priced, or somewhat over priced and etched with a windows ME logo.
-
If our site made any difference to LM as far as this topic goes, it wouldn't matter because not enough people want it.
I personally think the Pulse is damn near perfect, and if you take away the rocker locks, it becomes even better. As a huge fan of the pre-2004 LM tools, I would really like to see this. The problem is the execution would be sub par, it wouldn't be the same. That, or they would try to stick some sort of extreme sport tool to the outside. Maybe a tire spoon for dirtbikers, they could tape one of those on a tool couldn't they? ::)
-
@3rdpig said:
I can't help think, respectfully of course, that some of you have lost the plot.The PST was a survival tool, designed to be carried a lot but only used as a last resort in an emergency. It wasn't a tool that Tim Leatherman expected everyone to use in their garage while ignoring the roll away tool chest with $10k of tools inside that's standing 5 feet away. Using it all day for all tasks is kind of like using a magnesium fire starter when you've got a butane lighter in a a drawer in the next room.
Used in that regard it was an excellent tool, I carried one for years and there were many times I was thankful I had it, but if there was a real screwdriver, knife or pliers handy I'd use them over the PST every time. Heck, I'd use my SAK over the PST most of the time if I didn't need pliers. If that's what we're looking for used PST and PST II's are easily obtained.
It was us, the multitool fanatics that changed it from a survival tool to an every day user. Do any of us really want, other than for nostalgia purposes, another "survival" tool? Because if we're trying to create a new PST that's a great every day use tool I think Victorinox already did that for us with the Spirit.
And do any of us think Leatherman can improve upon the Spirit? With their current management and QC? I don't.
Rust in Peace
Just my $0.02.
Actually, yes in a way. Could you imagine what Leatherman and Victorinox could do make if they worked together. Not ever going to happen, but they could make some sweet tools.
sent from my mobile
-
Well if multitools were like guitars, then Leatherman could introduce masterbuilt repros, to original specs, assembled in their Custom Shop with a choice of NOS or reliced finishes :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login