Plier tightness?
-
I would appreciate any info on how ST300 replaceable wire cutters are cutting stranded copper wire, like the one on my photos attached here.
Thanks in advance!
-
For cutting stranded wire with a significant jacket or covering, I'll often use the serrated blade to just cut the insulation, making a notch. Then I find that the regular wire cutters will handle the finer strands just fine. It seems that the wire's insulation will cause interference of a sort with the cutters.
Just my experience, YMMV.
-
Welcome to MTO, Marko.
Dobro nam došao. :DNice to have another Croat around this place.
The only multitool wire cutters I found consistently bad (and I do mean BAD
) at cutting stranded wire are the ones on the Victorinox Spirit. Fail every time. ::) I generally get good cuts with Leathermans though. I did a quick test here for you with a couple multies and per your request, wire like the one in your photos. I even picked a blue one. :P The best cuts I got with a full sized Swisstool. Others were OK, (except the Spirit ::) ) the Skeletool cut a lot better with the hard wire cutter notch actually but I found that out only after I started uploading the video. :DSorry about the aiming, I was watching through the viewer window of the camera. :)
-
Wow, thanks a lot my fellow countryman :D Hvala na dobrodošlici

This is one very useful video!
I am really surprised by the ease that your charge is cutting that wire. Both of my Waves were cutting like your Spirit. Failed almost every cut. Either they make better pliers for Charges or your Charge is an older batch, from the good old days of quality products :'(
ST300 seems like a decent cutter which makes me want the new Surge even more

-
My Charge's date stamps are February 2008. :D I had a Wave from 2010 I think (sold it this winter) but the cutters were equally good. I don't think I'll be buying one of the new Surges though. I bought one as my first (or second,
I never was sure) multitool but sold it as I never carried it due to it's weight. IT'S HEAVY. Then I missed it and bought another one. Which got sold a couple of months later.
I think I've learned my lesson. :D Me and Suges don't get along. ;)Make sure you try one out at a shop before you buy it. Even if you order from eBay go to a local shop first to get a feel for it. Chipoteka usually has a wide selection of Leathermans on display.
And yes, Dream Point's CS is very good. I had a few problems with them in 2008 but after that they've been nothing but helpful. Last time I ended up chatting over the phone with the manager lady for half an hour. :D Very nice lady.

-
I sold my Surge about 2 years ago for the same reason you sold yours, because it felt too heavy. I regret that decision ever since.
I deliberately wrote "felt to heavy" because if you give it a little thought, 80 grams more on your person is negligible. I think its robustness gives it a heavy look and feel.
I remember carrying my first Swisstool on the belt while i was in military service and thinking about how lightweight it is. Everyone in my unit was impressed with the fact how many tools fit into such small package.
I think nowadays we’ve gone a bit too far counting every gram.
-
True, but those grams add up, the sheath, the bit kit, the extra saw blades and file, ... the weight pulling on your belt ... and you end up with your pants on the floor. :ahhh

:P
(not my legs but they do belong to a member of the staff here we miss very much)
Bag carry should be fine though. ;)
-
@enki_ck said:
True, but those grams add up, the sheath, the bit kit, the extra saw blades and file, ... the weight pulling on your belt ... and you end up with your pants on the floor. :ahhh

I'd rather lose my pants than end up ashamed by not being able to cut some tiny soft wire with my expensive high tech multi tool :P
-
@enki_ck said:
True, but those grams add up, the sheath, the bit kit, the extra saw blades and file, ... the weight pulling on your belt ... and you end up with your pants on the floor. :ahhh
:P
(not my legs but they do belong to a member of the staff here we miss very much)
Bag carry should be fine though. ;)
-
I've cut quite a bit of wire with all of my pliers-based tools, and I've never had any trouble out of any of them save the Wingman. I tend to always use the "hard wire" notch though. Bites right through.
-
-
Question: If I wanted to cut stranded steel wire, such as bicycle brake cable, which leatherman tool might do the best job? That stuff seems to be the worst of both worlds - hard AND it tends to just deform and mash between the cutters. Do the 154 cm replaceable cutters on the new plier heads handle it any better than the regular wave or charge cutters?
-
Suggestion: elsewhere on the forum, someone suggested toenail clippers as an easy carry item for cutting fine stranded copper wire. Works!
-
-
- Question: If I wanted to cut stranded steel wire, such as bicycle brake cable, which leatherman tool might do the best job? That stuff seems to be the worst of both worlds - hard AND it tends to just deform and mash between the cutters. Do the 154 cm replaceable cutters on the new plier heads handle it any better than the regular wave or charge cutters?
I've cut bicycle brake cable easily with my Rebar, so they should work fine. I don't know about Wave-type pliers, but I'd be more careful with those because you can mess up the whole plier head if you damage the cutters.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:D :D