Detron's SwissTool
-
Nice review detron! Thanks to the great member that sent this to you, and thanks to you for all the IT help/support you have provided to us!

Sent from my iPhone 5 using Tapatalk
-
Nice overview
You might start looking at other multitools slightly differently from now on ;) :D -
Good review man
It looks like that one is a good user, which will help you feel less worried/guilty about potentially damaging the beautiful finish. I worry about that some with my Spirit, but I know they're more than capable of handling some abuse 
-
Nice review. For those who have tried both, which multitool do you prefer: Victorinox or Leatherman? They seem very similar, right?
-
Nice rundown on one of my favorite tools! My only complaint about swiss tools, is there isnt enough versions of them! I think there is only 3 or 4 if you count BO, so it doesnt take too long to collect them all. :D
-
@victordomingos said:
Nice review. For those who have tried both, which multitool do you prefer: Victorinox or Leatherman? They seem very similar, right?Well, that obviously depends on which models you compare.
generally, though, fit and finish, and just general feel of the tool, is better on the Vic's I have (had). My carry now usually rotates between my Swisstool and my LM Rebar, depending on some things.
Between those two, well, I can't really say which one I like more. Just depends on when, where and how I'm gonna use them. I don't like the Vic sheath too much, though. I find the LM one much better, because it can hold some other items with the MT too (I have a Vic Vagabond (58mm), a Fenix E01 flashlight and a PocketwrenchII in it), that therefor you don't have to find another place for

-
@victordomingos said:
Nice review. For those who have tried both, which multitool do you prefer: Victorinox or Leatherman? They seem very similar, right?when i first began here i kept hearing about the fit and finish of the swisstools vs LM and how once i got one it would be amazing and i wouldn't look back at LM or any other MT the same. well i have several MTs now and a few of the exact same swisstool for comparison.
the swisstools i got were used and came to me that way but were in very good condition non the less. much like Detron pointed out i was pleased at the over all workmanship of the tool. i personally like the bluntISH plier and all outside tool approach of the swisstool. LM has needle nose pliers which are fantastic but it would be nice to see other variations available however the OHO tools on some LM models cannot be beat IMHO as you still need 2 hands on the swisstool. YMMV
the highly polished finish is awesome on the swisstool but that IMO doesn't win against the LM
( my LMs havent had rust issues ). i like how there is NO tool clumping on the swisstool but dislike the sheath terribly for actual use vs the LM nylon one. i can keep the LM pliers in a ready to use position while i cannot with my swisstool in the Vic sheath. i dislike that neither has belt clips.i don't think there is a clear winner for me and my LM reference is my Wave.
Plus kit vs LM Bit kit plus extender
i have the L wrench and its a stout little tool that came with 6 bits
i bought the LM bit cards and extender with a total bit count of 42to me in real world use thus far the LM clearly wins by simply having many more options without adding bulk. both are easy to carry in their assigned spaces in the MT sheaths but the plus kit is more of a stand alone kit while the LM kit is meant to use with your tool ( with a simple addition you can use your LM kit stand alone as well ). depending on your real world needs YMMV.
bottom line
BMOT said is more succinctly, i also don't have a clear winner as i carry both and both have not let me down on the job ( ive had my wave longer ). each has something i really like over the other and each has a limitation over the other. my wave is an excellent tool and my swisstool is as well and im happy to have both ready for the call.
-
Thanks :-)
-
@victordomingos said:
Nice review. For those who have tried both, which multitool do you prefer: Victorinox or Leatherman? They seem very similar, right?I tend to like a leatherman more than a Vic. Vic makes a sweet tool but, they are too polished. Sometimes there tools slip because of this and hard as hell to hold onto when they are wet or greasy. Vics shining stars is there saks. Vic also lacks OH blades and tools. But this is preference for me.
sent from my mobile -
I will still carry my leatherman as my main MT, once in a while I might switch it out for a change, but my Charge TTi and AL are my favorites. I like the OHO.
I love the SwissTool nail nick placement, the shine, the click action when opening and closing. This is a great tool, and if I did not carry the bit extender and full bit kit with my Charge, I might rotate this in periodically.
I would put this in my car as a car tool, but I like playing with my collection too much to do that. (How can I watch TV and play with a SAK or MT if it is in the car?

However, my new Skinth that is on the way can hold 2 4" MTs, so I might be mixing and matching on a regular basis
-
I have carried a Leatherman Wave for around 10 years as well as my Cybertool, I like it a lot.
BUT - the Wave just isn't all that comfortable if you need to use a bit of force to squeeze the pliers.Then I got a Victorinox SwissTool X 2nd hand through Amazon and started carrying that & my Cybertool.
The SwissTool is much more comfortable to use as pliers, I can squeeze hard and nothing is digging into my palm - this is due to where the tools are placed, all tools available when the pliers are closed also means that those tools are NOT on the outside when using the pliers.
The SwissTool has some tools that the Wave doesn't - chisel, pry tool, awl & ruler.
The SwissTool has all the tools available without having to open up the pliers.
The tools don't clump like my Wave tools.
ALL the tools lock open.I've never had any rust problems with my Wave and it is still in great condition after more than a decade of ownership. I also like certain features of my Wave like the fantastic file (rough one side, diamond the other) and sometimes the pointy blade is more useful.
But overall I like my SwissTool better. -
I love this type of threads.
to both Detron and the donor of the Swisstool. 
-
Yes, I still don't understand why everyone likes the Swisstool so much.
After I get the Rebar/Micra set, I'll save up and get a Spirit X. -
@CanadianLMfan said:
Yes, I still don't understand why everyone likes the Swisstool so much.
After I get the Rebar/Micra set, I'll save up and get a Spirit X.I didn't see what the big deal was myself until I finally gave in to my curiosity and got a Spirit. Once I had it in my hands, I understood :D
-
@CanadianLMfan said:
Yes, I still don't understand why everyone likes the Swisstool so much.
After I get the Rebar/Micra set, I'll save up and get a Spirit X.read my first line:
When I joined this forum, I saw people saying this was the THE multitool, and I thought they were just Victorinox fans, or biased against Leatherman and other brands, well NOW I UNDERSTAND!!
to me on paper this does not compare, however having it my hands changed my level of respect for the tool. I still prefer my Charge TTi due to OHO, but this moved up the later several rungs by having it in my hand
-
@CanadianLMfan said:
I still don't understand why everyone likes the Swisstool so much.Not to say there aren't other good tools out there, or that there is no room for improvement of the Swisstool, but the F&F and W&T of the Swisstool lines are second to none and they are the standard against which others should be judged.
-
@CanadianLMfan said:
Yes, I still don't understand why everyone likes the Swisstool so much.
After I get the Rebar/Micra set, I'll save up and get a Spirit X.its about fit and finish as well as performance. the swisstool is a beefy well designed MT that has a great array of implements. these implements all open with authority and have a great locking element and a heavy duty build to each one. the finish is great and as with most Vics the reliability is second to none. i personally like the blunt(ish) plier also when you open the tool it feels high end and well made because it snaps open with authority. the tool simply oozes quality and craftsmanship.
there is no mistaking this tool was meant to do work and hard at that all the while looking like a piece or art. i a spirit on the way and im sure this too will have the look and feel of its larger brother. as a collector this is a must have and as a hardworking individual its a must have as well. now as ive mentioned this tool isnt for everyone but that's not to say it cant hold its own or is any less of a MT it may just not be your cup of tea.
-
I recently got a new, current issue Swisstool after not having one for several years and I have to say I'm impressed. I love the improved file and serrated blade. I had a slight worry about wire cutting ability compared to newer LM's with their replaceable cutters, which was totally unfounded. It cuts coathanger like it was made of cheese
I have no doubts, this multi will serve me well. -
Great review.
Its just sad to see that they abused the tool and let it get rusty :-[
-
@CanadianLMfan said:
Yes, I still don't understand why everyone likes the Swisstool so much.
After I get the Rebar/Micra set, I'll save up and get a Spirit X.Vic MTs are in a whole other league as far as quality. Its actually made from steel (similiar to 440) that is really hard to rust. Leathermans rust like mad for me and lots of others (they use 420).
I can still pick out things to improve on the swisstools, like they need a clip and lanyard option, but other than that they are as close to MT perfection that currently exists on this planet. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


