Metal saw uses
-
I cut a bicycle lock off a bicycle once...
Don't worry it was mine but I had lost the key to take it off
-
Not the saw per se, but the metal file works just fine on fingernails.
-
On a relevant note, I regularly use the File on my LM ST300, as it is my heavy duty holiday/traveling tool.
I have not tried to cut anything serious with the cutting side (I tried to cut a wire once then gave up and used the pliers cuters) but the file is OK in an emergency. I would not use it unless I had no other choice, as it is not really that good (too smooth).
The Swisstool one looks rougher and should work better. The newer SS SAKs saws are considered better than the older ones. -
I used mine to modify a skeleton key to fit a storage room lock. I forgot the work keyring and needed to get in. Filed the extra metal from the side of the key and it worked like a charm. I used to carry two of those big keys for work, one for the workshop/boiler room at home and one for the staircase at my grandfathers place. Now that one covers both the work keys and the staircase key.
-
^ That's pretty cool

So no one has tried handcuffs yet?

-
If I find some handcuffs I will try. Probably work better to cut them if I am not in them.
sent from my mobile
-
used as a fine-toothed woodsaw.
-
I took some old luggage locks off my/the wife's suitcases. We lost the keys a long time ago, they've been dangling there for a couple years.
-
I never use the saw.
-
Works good for fuel lines too.
sent from my mobile
-
I still never had a use for one yet. But Ive envisioned maybe someday Id need it in an urban environment, for sure more than a wood saw. I can make do with a knife to cut through small sticks a wood saw can, but the metal saw is the only tool that can, well, cut metal.
Maybe to self rescue from a trapped elevator situation?

-
@Syph007 said:
Maybe to self rescue from a trapped elevator situation?
Well, the one time I was in that situation, I ended up using a ZT0550 to pry the doors open enough to grab and pull open. Broke the knife, but got out. A file in that situation wouldn't have been useful. Perhaps another type of elevator with an actual hoistaway though....
-
I've used mine to saw metal once, and while it was a slow process, it did work. I've used it as a nail file, but it's a bit rough for that imo. The tip is a good nail cleaner as well. I also think it could cut twigs/small branches as well, but it would probably be much slower than the wood saw.
-
Maybe to self rescue from a trapped elevator situation?

Well, the one time I was in that situation, I ended up using a ZT0550 to pry the doors open enough to grab and pull open. Broke the knife, but got out. A file in that situation wouldn't have been useful. Perhaps another type of elevator with an actual hoistaway though....
Cool story, so you were able to pry open the door?
-
Maybe to self rescue from a trapped elevator situation?

Well, the one time I was in that situation, I ended up using a ZT0550 to pry the doors open enough to grab and pull open. Broke the knife, but got out. A file in that situation wouldn't have been useful. Perhaps another type of elevator with an actual hoistaway though....
Cool story, so you were able to pry open the door?
Yep. The knife got it open enough for my foot and hands. It was an interesting thing, and ZT ended up replacing the broken blade on the knife for me. It wasn't like a magic crowbar, but it was the most robust thing I had on me at the time and I was fortunate enough that it worked. Otherwise, I'd have had a panic attack on account of my claustrophobia since the gent on the intercom said it'd be about half an hour before they could get to me. In midtown Manhattan during morning rush, I doubt it'd be that short a time anyway...
So yeah...metal saw. If only that dude from the first Saw movie had a SAK concealed somewhere... :D
-
Maybe to self rescue from a trapped elevator situation?

Well, the one time I was in that situation, I ended up using a ZT0550 to pry the doors open enough to grab and pull open. Broke the knife, but got out. A file in that situation wouldn't have been useful. Perhaps another type of elevator with an actual hoistaway though....
Cool story, so you were able to pry open the door?
Yep. The knife got it open enough for my foot and hands. It was an interesting thing, and ZT ended up replacing the broken blade on the knife for me. It wasn't like a magic crowbar, but it was the most robust thing I had on me at the time and I was fortunate enough that it worked. Otherwise, I'd have had a panic attack on account of my claustrophobia since the gent on the intercom said it'd be about half an hour before they could get to me. In midtown Manhattan during morning rush, I doubt it'd be that short a time anyway...
So yeah...metal saw. If only that dude from the first Saw movie had a SAK concealed somewhere... :D
Ya I was in an elevator for only a few minutes before it started moving again, and that was very uncomfortable. I would have been trying to pry the thing open too if it didnt move.
-
Cut away an oxidized strainer basket in a kitchen sink . I've cut all kinds of awkward nails . Cleaned up the slot on a damaged screw .
Chris
-
Theyre some pretty cool stories, I guess you could use it for cutting what the small sak pliers' wire cutters can't . Does the file work well on metal?
-
When I owned a swisschamp years ago, I used mine to cut copper piping/tubing all the time.
-
@Refrigerator said:
Theyre some pretty cool stories, I guess you could use it for cutting what the small sak pliers' wire cutters can't . Does the file work well on metal?Yes it does. You also use the file to score barbed wire then bend it to snap it in half. Works pretty good if you don't have fencing tool or pliers.
sent from my mobile
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login