What the hack is Metro doing?
-
The SUSPENSION is killing me, when will Gerbers enter the joke?
-
I sure somebody will flik one in here soon enough.
Til then, Surge onward with the bad puns.sent from my mobile
-
The hilarity ensues!
I did a bit of experimenting today. I cut a length 3/16 tubing (the length of the OUTSIDE of the handle and then expanded one end. Then I cut a length of 7/32 tubing (the length of the INSIDE of the handle) and slide it on the 3/16 tubing.
Then slide the whole telescope into the handle and then expanded the other side of the 3/16 tubing to lock it into place. The 7/32 tubing on the inside stabilizes and gives the 3/16 a place to expand and grip.
Then I peened the rest of the tube down and ground off the head.
Tadah! Open ended tubing!


I had an extra theraband silver band set made up so I threaded it through the new tubes with a bit of string and then use some other tubing to match stick into place.



I shot a bunch of BBs and 1/4" steel and I didn't need to flip the slingshot, it's actual a through the fork shot. Provided the grip and draw is even.

Folded up nicely.

My next task is to design a fold out implement that can accept a quick change tubing set.
There is always a way, hack on!
-
very cool! have you shoot it yet?
-
@ducttapetech said:
very cool! have you shoot it yet?Yah with BB's and 1/4. Very fun.
There is always a way, hack on!
-
I have bookmarked this thread

-
:D I like fun threads!
-
I like flashlight foregrips. ;)
-
Sweeeeeet!¡!¡!

-
I like flashlight foregrips. ;)
Like this? Made this a couple of weeks ago.
There is always a way, hack on!
Yeah, was trying to be subtle, hense the ;). ;)
-
@Metropolicity said:
I shot a bunch of BBs and 1/4" steel and I didn't need to flip the slingshot, it's actual a through the fork shot. Provided the grip and draw is even.
What I really want to know is how you managed to hold and not least operate your camera with your mouth to take that pic.. :o :o
-
I don´t know how big the holes for the rubber need to be, but did you think about enlarging the tool pivots diameter so you can bore them hollow and have tools and a fixture for the rubber hose?
and maybe you could use teh fold out lanyard hole for a visor? -
I shot a bunch of BBs and 1/4" steel and I didn't need to flip the slingshot, it's actual a through the fork shot. Provided the grip and draw is even.

What I really want to know is how you managed to hold and not least operate your camera with your mouth to take that pic.. :o :o

-
I shot a bunch of BBs and 1/4" steel and I didn't need to flip the slingshot, it's actual a through the fork shot. Provided the grip and draw is even.

What I really want to know is how you managed to hold and not least operate your camera with your mouth to take that pic.. :o :o
I actually had the bands behind the camera, use IT to pull it back and then shoot the photo.
There is always a way, hack on!
-
I've been fiddling around with this again and put on some pseudo tapered 1842 tubes and a custom double suede pouch on this and she screams when shooting 3/8" steelies. I think I found the perfect size of bands.
Pseudo tapered as in there is a differential and exponential power increase with half the bands being doubled and half of them being single tubes. Draw weight is marginally increased but speed is pushed up significantly.
Now I have to figure out how to mount these bands on a Wave/charge so that they can be removed so the normal function of the tool can be retained.
Bush craft tool anyone? :)
There is always a way, hack on!

-
@Metropolicity said:
I've been fiddling around with this again and put on some pseudo tapered 1842 tubes and a custom double suede pouch on this and she screams when shooting 3/8" steelies. I think I found the perfect size of bands.Pseudo tapered as in there is a differential and exponential power increase with half the bands being doubled and half of them being single tubes. Draw weight is marginally increased but speed is pushed up significantly.
Now I have to figure out how to mount these bands on a Wave/charge so that they can be removed so the normal function of the tool can be retained.
Bush craft tool anyone? :)
There is always a way, hack on!
This one is nice but I'm still inclined to say that things will get serious when you make a compound bow out of a MT.
That will be The Bushcraft Multi!!
p.s. Shouldn't the title be: "What the <u>Hack</u> in Metro Doing?" ?
-
I've been fiddling around with this again and put on some pseudo tapered 1842 tubes and a custom double suede pouch on this and she screams when shooting 3/8" steelies. I think I found the perfect size of bands.
Pseudo tapered as in there is a differential and exponential power increase with half the bands being doubled and half of them being single tubes. Draw weight is marginally increased but speed is pushed up significantly.
Now I have to figure out how to mount these bands on a Wave/charge so that they can be removed so the normal function of the tool can be retained.
Bush craft tool anyone? :)
There is always a way, hack on!
This one is nice but I'm still inclined to say that things will get serious when you make a compound bow out of a MT.
That will be The Bushcraft Multi!!
p.s. Shouldn't the title be: "What the <u>Hack</u> in Metro Doing?" ?
I'll get on Enki to change the title ;)
A compound bow would be tough indeed!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






