hello from Romania ;)
-
@bmot: thx for the advice, can you please confirm that the Surge can be used with regulat t-shank jigsaw blades, like these http://www.boschtools.com/Products/Accessories/Pages/BoschAccessoryDetail.aspx?pid=1326#specs ?
Then this may well be the solution for me, as it is easy to carry a spare saw blade.
It also needs the screwdriver bits - compared to the 4 screwdrivers standard of the Super Tool 300 -
Welcome mate
i personaly prefer the surge to the st300,both great heavy duty mt's but i prefer outside opening tools like the main blade and saw,plus its t,shank exchanger is fantastic
as a long time wave user the surge is my go to heavy duty mt for big jobs and highly recommend it,i used a powerlock for my maintenance job as well as other mt's but the surge has been my favourite by a long shot 

-
@alexei said:
@bmot: thx for the advice, can you please confirm that the Surge can be used with regulat t-shank jigsaw blades, like these http://www.boschtools.com...etail.aspx?pid=1326#specs ?
Then this may well be the solution for me, as it is easy to carry a spare saw blade.
It also needs the screwdriver bits - compared to the 4 screwdrivers standard of the Super Tool 300It depends, if you have the patience, you can buy the new-style Surge, which has the same pliers as the ST300, and an upgraded t-shank adapter which takes the regular t-shank blades. The old style Surge, which is now still sold, has the older pliers, and regular t-shank blades are a bit too thin for the adapter. You can cure this with a simple piece of shrink-tube or tape around the shank, though.
Oh, and what I forgot to mention: Welcome, from the looow lands on the other side of Europe

-
I also LOVE my Surge. It is a great tool! and the blade exchanger is a nice touch also because it allows you to not only use other blades, but you can remove the blade if you ever have to use it in a tight spot.
-
Welcome to the forum! Did you consider the swisstool? It has a metal saw and is around the same size as the supertool 300.
-
Welcome to the forum! Did you consider the swisstool? It has a metal saw and is around the same size as the supertool 300.
I agree, but I think he is looking for the thinner hacksaw type metal saw that is on the ST300 EOD

Ah yes. The victorinox metal saw is not a full substitute for a hacksaw.
-
Howdy!
-
Hi there Alex..

-
Welcome to the forum.

It depends, if you have the patience, you can buy the new-style Surge
Any idea about when the new Surge will be available?
It should have been out already. Apparently they'll be making them available when the dealers clear out their current stock of old style Surges or something like that. ::) So if you plan to buy locally it might be a bit of a long wait. The US eBay sellers and similar should have them sooner. Stick around here and we'll probably be the first to know when these become available for sale and where. Quite a few people have been waiting on the new Surge to come out.
-
Welcome!

-
I've just got back from a store after holding for a few minutes the Surge, the Rebar and the MUT.
I found that the Surge seems incredibly heavy :( even compared to the MUT (354 grams of the Surge vs the 317.5 grams of the MUT). I did not put them on the scale, I am just talking 'bout how they felt in my hand.
I mean the MUT did not feel so heavy... and the difference is just about 40grams
-
Hmmm... look what I have found, digging and searching the forum:
</post/64799>
This may solve my issue - need for a metal saw on the multitool. This way I may go for a lighter tool that will not take an important toll on my backpack weight ;) when hiking / skinning up
LE - and the original topic : </topic/95
Great work!
PURE GOLD! -
Welcome, hope you're finding the forum useful so far!
-
I ended up (or should I say started up) buying the Wave - and I am very happy with it so far!
I am looking to the following mods:
- bit driver locking at 90 degrees angle
- hacksaw blades made to fit in the lanyard / pocket clip locking slot (http://forum.multitool.org/general-tool-discussion/charge-saws/150/)
- strap cutting hook on the serrated blade (or maybe replacement blade with a hook)
-
@alexei said:
I ended up (or should I say started up) buying the Wave - and I am very happy with it so far!I am looking to the following mods:
- bit driver locking at 90 degrees angle
- hacksaw blades made to fit in the lanyard / pocket clip locking slot (http://forum.multitool.or...scussion/charge-saws/150/)
- strap cutting hook on the serrated blade (or maybe replacement blade with a hook)
Did you find the thread already where it's explained how to create a 90° locking driver? If not, HERE IT IS.

There are currently some replacement serrated blades with hook on eBay.
black: http://www.ebay.com/itm/350899884233
stainless: http://www.ebay.com/itm/350899884339
-
@enki_ck: Thank you for pointing out the topic about the 90 degrees locking screwdriver tool!

I am also looking at this mod http://forum.multitool.org/leatherman-tools/leatherman(new-wave)-adapted-to-regular-14'-hex-bits/ because it seems very useful (to me) to be able to use regular hex bits. They are easier to find in a variety of types - and one can select what to carry depending on his needs.
will post pics soon - probably I'll have to start a new topic.
-
@alexei said:
@enki_ck: Thank you for pointing out the topic about the 90 degrees locking screwdriver tool!
I am also looking at this mod http://forum.multitool.or...o-regular-14%27-hex-bits/ because it seems very useful (to me) to be able to use regular hex bits. They are easier to find in a variety of types - and one can select what to carry depending on his needs.
will post pics soon - probably I'll have to start a new topic.
They do sell a ready-made bit adapter, too... http://www.leatherman.com/131.html#start=4
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login