What did you use your Sak on today?
-
Not so much as what my SAK got used on as what got used on it.

-
Our toaster was short-circuiting, not working at all and the electricity would go down every time we tried to turn it on. So I was intending to use one of my SAKs to disassemble it and to fix it. however, it turn out that the solution was simpler than that and did not require a SAK: the metal thing that takes bread in and out was a little bent and was touching the resistance in one side, and you could easily bring it back with your hand, through the top of the toaster.
Actually I would have preferred to disassemble it and so on, but it wasn't necessary. And besides, even if I had to do it, I think none of my SAKs would be able to open it with good manners, because Kunft decided to lock it with triwing screws or something like that... :-(
By the way, are there any triwing bits for Cybertool?
-
-
My Swisstool Spirit S just now made me really happy about that serrated blade .. sticking wall plugs in the ceiling to install a new light, one wall plug was sticking out a few mm and had to be trimmed. Mr Serrated Blade to the rescue....
-
I used the awesome utility blade to open some boxes at work, and liberate the packing slips from their plastic prisons ;)
Is that an electrician?
I'm still undecided which Alox to get... it all comes down to the small blade vs tin opener dilemma....It's actually a custom Alox, made from a Pioneer as the base, adding the Electrician's blade in place of the can opener, and adding a phillips driver and pliers. I can't post a pic right now of all the tools opened, but will try to remember later if you would like. It is a tough call on the can opener vs small blade though. At the time I didn't view the can opener as all that useful, but I have more appreciation for it now. However, I still am glad I went with that blade as it's very useful to me for a variety of tasks, and allows me to keep the main blade clean and sharp for food or just as needed for larger tasks. There is also the pruner blade, which is nice as well, but I think the utility blade of the Electrician is slightly better (imo of course ;)).
-
Wow, pliars and a Phillips ! That sounds awesome. How chunky is that thing?
I have my eye on a Harvester - which I think is a Farmer with the pruning blade instead of the tin opener. They're really cheap - 23 euros or something -- so I think I might just get one and see how it goes with no tin opener! -
@Thunderpants said:
Wow, pliars and a Phillips ! That sounds awesome. How chunky is that thing?
I have my eye on a Harvester - which I think is a Farmer with the pruning blade instead of the tin opener. They're really cheap - 23 euros or something -- so I think I might just get one and see how it goes with no tin opener!It's a bit chunky, but I'd say that depends on your tolerance for SAK bulk. It's just under 3/4" thick if I remember correctly, which sounds like a lot, but it's actually thinner than my other SAKs, the Ranger Plus and Yeochamp (another custom). I will try to remember to post a couple pics of it from different angles to give you an idea what it looks like. It fits nicely in my hand though. I wish I had had scissors put in as well though, and I may have that done as soon as I can afford it. That will add another layer of bulk, but it will be fine for me. I hope you enjoy your Harvester
Let us know your thoughts once you have had some playtime with it. -
I can tolerate a good bit of 'bulk' in a SAK. I've been known to throw my Swiss Champ in my RF pocket and take off with it. And besides, isn't it worth a little extra chunkiness to have pliers and all the other tools you're gonna need?
-
@sawman said:
I can tolerate a good bit of 'bulk' in a SAK. I've been known to throw my Swiss Champ in my RF pocket and take off with it. And besides, isn't it worth a little extra chunkiness to have pliers and all the other tools you're gonna need?+1--I don't mind the extra bulk, to a degree, and I don't mind the redundancy either. Much of the stuff on my SAKs is also covered by the MT I'm carrying as well, but I think it's a good thing to have extra options and backup just in case. This is coming from someone who doesn't use his MT/SAK much each day, but this would apply even moreso to someone who would use their MT/SAK frequently in a day. What's funny is I started off as more of a minimalist with SAKs, thinking I didn't need much more than a Compact to compliment my MTs.
-
I like to be prepared, and that's why I never leave the house without 2 (sometimes 3) LED lights. You never know what kind of situation will arise...
-
@sawman said:
I like to be prepared, and that's why I never leave the house without 2 (sometimes 3) LED lights. You never know what kind of situation will arise...I don't carry any actual flashlights like many here do (not sure if that's what you carry, or just the single LED keychain lights). There is a single LED on the cap of my tac-pen, and my Yeochamp and Ranger Plus have Photon attached. So at work I usually have two single LED lights on me, but my Mechaneer currently has the monkey fist attached, so only one light this week. Despite the fact that I don't use all of this stuff every day, I like knowing I have options when a need arises

-
I used the orange peeler in my Minichamp to open a 20 year old Lanco wrist watch. I could not do anything more than looking inside and close it again, but the little SAK worked perfectly for that function.
-
-
Supercool knife! Thanks for the pictures. It looks like it's a handy size - not too big not too small. And really useful tools.
-
@Thunderpants said:
Supercool knife! Thanks for the pictures. It looks like it's a handy size - not too big not too small. And really useful tools.Thanks
Yeah, it's really not bad, imo. I know many prefer the slimness of the Pioneer/Electrician or Farmer even. But as you can see from the pics, it's not too bad. It's the same thickness as the EvoGrip 16, which isn't a big SAK really. The Mechaneer's just solid is all. It weighs 4.1oz (5.2oz with that monkey fist attached), while the Ranger Plus weighs just 4.2oz, even though it looks a fair amount larger.I look forward to your thoughts/impressions of the Harvester

-
Cadet used to pry open the alarm remote for my fiancee's Audi and pop in a new battery, then, I used it to adjust the lock on my front door.
Sent from my nex 7, using squiffy tart 4
-
Mini screwdriver got a bit of use today.

-
-
Very cool Kyle

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






