Juice mods?
-
Did a search but my google fu has always been weak.
Got a juice on the way and obviously am looking at potential mods. I know the juice has rivetted pivots buts has anyone replaced the pivots with something removable? I do have a lathe and some machining experience so I could probably create my own if required but it would be nice to know a little bit about others mods before I get out the grinder and get myself in too deep :)
-
What model juice do you got Rorschach.
what do you plan on doing with it.
maybe I can give you a idea or two
-
A few people have done juice mods, metro for sure, and j-sews and there were others. The pivots are 1/8 inch so the ones from the knife supply place I order work just fine.
http://www.knifekits.com/vcom/product_info.php?cPath=60_83&products_id=471
-
@Syph007 said:
A few people have done juice mods, metro for sure, and j-sews and there were others. The pivots are 1/8 inch so the ones from the knife supply place I order work just fine.http://www.knifekits.com/vcom/product_info.php?cPath=60_83&products_id=471
Awesome, didn't know you could get read made pivots like this, bit of modding on the lathe needed maybe but that's no biggie. Need to find a UK supplier now.
-
A few people have done juice mods, metro for sure, and j-sews and there were others. The pivots are 1/8 inch so the ones from the knife supply place I order work just fine.
http://www.knifekits.com/vcom/product_info.php?cPath=60_83&products_id=471
Awesome, didn't know you could get read made pivots like this, bit of modding on the lathe needed maybe but that's no biggie. Need to find a UK supplier now.
If you do find something in the UK, please let us know.

-
Happy Modding
-
the Smoothy, Metro's Juice mod:
</topic/42673the SuperJuice KFS4, J-sews look on a Juice:
</topic/19553 -
A few people have done juice mods, metro for sure, and j-sews and there were others. The pivots are 1/8 inch so the ones from the knife supply place I order work just fine.
http://www.knifekits.com/vcom/product_info.php?cPath=60_83&products_id=471
Awesome, didn't know you could get read made pivots like this, bit of modding on the lathe needed maybe but that's no biggie. Need to find a UK supplier now.
If you do find something in the UK, please let us know.

+1
-
Those pivots are awesome, I'm going to have to convert my CS over. Any advice of masking so I don't grind the aluminum scales?
-
Whenevr I need to grind/file/sand up close to something I use electrical tape, because it is thick and kind of spongy it gives you just enough warning that you are about to do some damage.
-
thanks for the advice and I look forward to see what you do with the Xe6
@Rorschach said:
Whenevr I need to grind/file/sand up close to something I use electrical tape, because it is thick and kind of spongy it gives you just enough warning that you are about to do some damage.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login