Sharpener advice
-
I use the Lanksy Universal System with an added extra course stone. I started out with just a little Gerber pull through sharpener and also have a little Lanksy dogbone sharpener that I bought after the main system.
The Lanksy system is really easy to use if a little time consuming and fiddly to swap sides. Unlike the Spyderco you can't just alternate every stroke because you've got to take the stone guide out of the hole, turn the clamp over and put the guide back in the hole. It's really hard to completely mess it up and I like the fact I can go to bed and sharpen knives tucked under my duvet. I find it a very relaxing thing to do before going to sleep. I realise that might seem a bit strange but it's something of benefit to me that I think I wouldn't be able to achieve with the Spyderco. I also sometimes use the fine stone freehand for an intermediate touch up and it works pretty well for that too.
I haven't worked out a good way of using the Universal System's serrated sharpener to sharpen my Wave's serrated blade but I might just be doing it wrong. That's why I bought the dogbone and it does the job pretty well and is also useful for quick touchups of a plain blade.
Edit: I should also add that I use the clamp on the Lanksy "wrong". I use the small blade clamp on my MT blades because I find I get more consistent results. I should really be using the main clamp I think, but I like to have a known point to line the blade up with.
-
Wow! Thanks everyone!
-
Hi everyone. Just as a follow up to my question, I appreciated everyone's advice. I watched that video and was impressed and admittedly intimidated. I ended up getting a Lansky BladeMedic. I love it! And I got it for $5.
-
That's great. As long as it works
-
I recommend at WSKTS Knife & Tool Sharpener it's like $70 on Amazon, you can put a shaving sharp convex edge on anything. If you can swing it get the Ken Onion for like $140 for total control over the angles it has 1 degree adjustments.
It's a foolproof system, plus it comes with a dvd to show you how to use it, not that you need it.
-
I always used a Sharpmaker but since I am not able to get my NIB LM PST BO sharp with it after at least 2-3 hours of sharpening, I ordered a Lansky with 5 different stones and hope that will do the trick.
The Lansky has got ultra coarse, coarse, medium, fine and ultra fine stones, while the Sharpmaker only has got coarse and fine stones as far as I know. -
@Dr. Bahn said:
I always used a Sharpmaker but since I am not able to get my NIB LM PST BO sharp with it after at least 2-3 hours of sharpening, I ordered a Lansky with 5 different stones and hope that will do the trick.
The Lansky has got ultra coarse, coarse, medium, fine and ultra fine stones, while the Sharpmaker only has got coarse and fine stones as far as I know.Dr. Bahn,
Spyderco Sharpmaker actually has ultra-fine stone set, and it can almost bring the edge to a mirror-polish state.
-
On second thought, I recently watch this and think this is a great video to demo that technique is everything, when it comes to sharpening.
24 grit to paper cutting sharp in no time:
https://www.youtube.com/watch?v=5At3NtNKHFA -
A while back I spend 1/2 hour to sharpen/sort out the angle of a D2 blade on the Lansky and was happy with it.
Then, feeling tired/bored I used my (really bad quality) diamond stones to do the secondary blade to my liking. It took me 5 minutes and I felt like an idiot for spending that much time on the Lansky.... :D
I like the Lansky but I can get similar results freehand, especially on a knife with allreday half-decent bevels...
My point being that on a user knife freehand sharpening is easy ro learn and practice, and I am a serious Lansky advocate.... -
@comis said:
Spyderco Sharpmaker actually has ultra-fine stone set, and it can almost bring the edge to a mirror-polish state.I know. But that doesn´t help me much by reprofiling the angle of the edge of my PSTs. ;) I need some coarser stones than the medium Sharpmaker stone and I hope the coarse and ultra coarse stones of the Lansky will do the trick. Besides the Sharpmaker is especially made for Spyderco knives and their specific edge angle. The Lansky offers 4 different angles and is therefore more versatile.
-
@Dr. Bahn said:
Spyderco Sharpmaker actually has ultra-fine stone set, and it can almost bring the edge to a mirror-polish state.
I know. But that doesn´t help me much by reprofiling the angle of the edge of my PSTs. ;) I need some coarser stones than the medium Sharpmaker stone and I hope the coarse and ultra coarse stones of the Lansky will do the trick. Besides the Sharpmaker is especially made for Spyderco knives and their specific edge angle. The Lansky offers 4 different angles and is therefore more versatile.
I'm sure the Lansky will solve the problem. I ended up getting the diamond "stones" for my Sharpmaker to do the initial reprofiling needed for using the system. Results in a horrible surface, but removes stock pretty efficiently. Fixing the surface is what the ceramic stones are good at, anyway.
-
@Steinar said:
I'm sure the Lansky will solve the problem. I ended up getting the diamond "stones" for my Sharpmaker to do the initial reprofiling needed for using the system. Results in a horrible surface, but removes stock pretty efficiently. Fixing the surface is what the ceramic stones are good at, anyway.I really hope the Lansky will solve the problem, but I am in cheerful spirits. :) I also thought about getting the diamant rods for the Sharpmaker but the complete Lansky kit was much cheaper.
-
Flat stones are an option for plain edged blades ( start on cheap but reasonable quality paring knives ie: Victorinox ) , follow by stropping . For serrated , an old leather bootlace loaded with abrasive .
I have just about every sharpening device known to man , my default is the Spyderco Sharpmaker .
Chris
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login