Question about 2 multi-tool minimum
-
Thank you 50ft, that is going to make a nice read for me today after work.

-
Always ends up being a SAK and a MT for me,whether Thier full size of keyring!
-
The screw/bolt combo is one problem for a single MT, but a situation where there are two bolts could also occur. In my usual setup, I'm covered for screw/bolt, but not for bolt/bolt.
The more rare the situation, you're just going to have to come to a point of accepting that you can't cover every option. MT's are great for covering a lot of things, but they have limits too.
For the Screw/bolt option, I think the Leatherman Squirt (or Style PS) paired with a Vic, pretty much anything 84mm or larger, and you're pretty well set for most of those cases. Something like a Cadet adds very little weight, and adds great driver capability, and a better blade than the Leatherman keychain, while maybe still slipping in under the radar, so as not to become a 'scary murder-death killy stab knife'.
I like the Leatherman keychain pliers better than anything offered on Vic's (at least 91mm) knives. But I like the blade and flathead on the vics 84 and 91s better. They pair up great, IMO.

-
Thank you both for your replies, lots to consider....excellent input!
I'm off to work and will reply later with my thoughts.Anyone else wanting to chime in, I'm here to learn.
Thanks again!
-
I've only had this type of situation requiring two pliers happen to me once, and I happened to be carrying two plier MTs, which isn't something I do often. It was mighty handy at that time, but it's not easy for me to carry two MTs, at least not full size anyway. I only occasionally ever use the pliers, so even though there is a rare chance I may need two pliers, I don't feel it's enough to justify carrying another plier based MT (unless it were small, but the smallest I have is the Juice KF4). If there is a chance that it would be more common for you to need two, then it may be worth doing so.
-
first off
for setting out to take care of a the co worker, awesome show of kindness.I have added drivers to each MT i carry for just this reason. I have a Vic Plus kit which is a great stand alone kit, I have a LM bit kit and extender however this is best suited to be used with the LM tool, not so much stand alone, I have a cheap L wrench with bit holder that i added my preference of bits to.
the screw/bolt situation can be resolved by combining 2 tools together in your EDC. Id imagine the bolt/bolt circumstance would be best handled with 2 plier based tools or in my case sockets that can be use with any of my kits by means of an adapter bit. having 2 tools may defeat a light carry for some but failing to accomplish a task as a result isn't so great either.
for light weight carry maybe add a plier layer Vic to your EDC and yes while the plier isn't heavy duty it can be advantageous in some respects. Maybe a Vic Mechanic or a Wenger model with the slip joint plier layer, just some thoughts other than adding another LM.
PM me if you like me to send you one of the $3 L wrenches and I'll add an assortment of bits plus the security torx ones that came with it. ive used it on several occasions and its not a bad tool. the bit holder has a pocket clip and if you want i can add more pictures for size reference.
-
I use bit kits like aloha007. They work well and can be very inexpensive.
-
I also completely understand the need for two separate tools, and that is why I bought a Skinth Shield 2XL. it can hold 2 MTs.
http://skinthsolutions.com/skinth-shields/however, I always have the leatherman Bit Kit and Bit Extender with my Charge TTi, but I have a P4 in my sheath too.
(PS4 stays home, it does have scissors, but the P4 has an awl!) and I have scissors on the charge and SAKs
I also carry a SAK (or two
) and I tend to carry ones with inline Phillips (explorer, champion, SwissChamp, Cybertool 41 {cybertool inline Phillips})I carry my heavy hitter in a MOLLE sheath on my backpack that I carry everyday
usually the Surge or Swisstool is in it, but one in a while it will be the ST300.I also keep my Leatherman Piranha in my skinth.
is it overkill? depends on who you ask. but I enjoy it.
-
I keep a Craftsman 6" adjustable wrench (spanner) as my MTs best pal, and always have. They are cheap, small, and do not mar bolts like pliers do. This is always my preferred carry. If you have an old Maglite 2 AA sheath, it will slip right into it for belt carry.
Some folks, including myself on occasion, pair a MT with a one piece tool like the Pocket Wrench to serve the same purpose. I prefer the open end and adjustability of my previous suggestion, but the Pocket Wrench is VERY portable and also offers prying and measuring functions.
And.. Let's not forget the most popular option.. A SAK with drivers to pair with your pliers MT. I like my Explorer for this job.
-
Another fan of carrying an adjustable spanner (wrench). For me it is a 4 inch Bahco. 8)
-
I carry a 4" adjustable, and a 4" set of locking pliers in my Skinth M7, which is usually in my Backpack. I grab the M7 if I am heading out somewhere.
-
A small ratchet kit like the one that comes with some Spirits is excellent, as is the CRKT Lil Guppie and the PocketWrenchII. I find the PWII fits in most of my MT sheaths without a problem. Not only can you hold bolts and nuts with it, but it makes a decent little prybar as well.
-
@Monrogue said:
I've only had this type of situation requiring two pliers happen to me once, and I happened to be carrying two plier MTs, which isn't something I do often.Right, this particular time was the only time needing two different tools has come up for me.
@Aloha007 said:
PM me if you like me to send you one of the $3 L wrenches and I'll add an assortment of bits plus the security torx ones that came with it.Thank you for that offer. That may be something I could put in the Skinth I had made.

@detron said:
I also carry a SAK (or two
) and I tend to carry ones with inline Phillips (explorer, champion, SwissChamp, Cybertool 41 {cybertool inline Phillips})I'm thinking of paring up a Leatherman with one of my SAKs. Best of both worlds. I even have a Gerber dime I like a lot.
@50ft-trad said:
There are some combos carried by various people in THIS thread. There are some small tool combos in there for ideas too
That made a great read today after work. I have lots of ideas now. Thanks again for that link.
-
Ive carried two MT's for a while now. I keep the bigger MT sheathed and a clipped one in pocket. Like one of the Kicks,skeles, and Sideclip. Plus Ill have the 11 in 1 on me or close by when out onservice calls
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login