JA,s OHT challenge.
-
Joel,
Because of the work you do, it is nice to see a variety of tasks being done by one tool and one tool only. I think you should keep that concept going in your challenges and not have a whole pile of tools on you.
I would like to see one done with the ST300 you just got. :D
-
Don't let the oht challenge 2 make you think about I'm going to do a review of it and all I got in it
Mike.I'm doing that one for fun. The challenge of the perfect carry for me after work.
the next tool I do anything with will be the super tool for sure.

-
@JAfromMn said:
Don't let the oht challenge 2 make you think about I'm going to do a review of it and all I got in it
Mike.I'm doing that one for fun. The challenge of the perfect carry for me after work.
the next tool I do anything with will be the super tool for sure.

WHY???????? >:(
REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR!
-
Don't let the oht challenge 2 make you think about I'm going to do a review of it and all I got in it
Mike.I'm doing that one for fun. The challenge of the perfect carry for me after work.
the next tool I do anything with will be the super tool for sure.

WHY???????? >:(
REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR!
Because I got a sweet new bo supertool 300 that really needs to get used.
-
Don't let the oht challenge 2 make you think about I'm going to do a review of it and all I got in it
Mike.I'm doing that one for fun. The challenge of the perfect carry for me after work.
the next tool I do anything with will be the super tool for sure.

WHY???????? >:(
REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR! REBAR!
Because I got a sweet new bo supertool 300 that really needs to get used.
Okay!!!

-
@JAfromMn said:
What tool would you all like to see me use nextLeatherman Super Tool 300
Leatherman Crunch
Victorinox Standard Swisstool
Gerber Grappler
Bear Jaws Superall of the above I plan on challenging soon or later.
My vote would be Swisstool, ST300, Bear Jaws, in order of preference. It seems you'll be testing the ST300 and that's cool. I'm really interested in seeing how it performs.

-
Between us id rather do the swisstool but I don't think using my old one would be fair.
OK I need a excuses to buy a new one.

-
@JAfromMn said:
What tool would you all like to see me use nextLeatherman Super Tool 300
Leatherman Crunch
Victorinox Standard Swisstool
Gerber Grappler
Bear Jaws Superall of the above I plan on challenging soon or later.
Personally I'd love to see how the Grappler fares. I have one and wasn't convinced with it initially, but it did start to win me over when I'd used it a bit. That said, I didn't put it through the kind of heavy challenges that your line of work might subject it too, and if I was going to grab one of my Gerbers for something like that that it would probably be the Diesel. I'm still a little wary about a couple of aspects on the Grappler, and a JAfromMN challenge would no doubt answer those concerns one way or another >:D
@JAfromMn said:
Between us id rather do the swisstool but I don't think using my old one would be fair.OK I need a excuses to buy a new one.

To be honest, I don't think it would be a challenge for the Swisstool :D though it would be interesting to hear how you find it in comparison with other tools

-
I think I will try get my hands on a grapler
id really like to see how it compares to the crunch.
I should be getting a crunch today in the mail.
-
@JAfromMn said:
I think I will try get my hands on a graplerid really like to see how it compares to the crunch.
I should be getting a crunch today in the mail.
My thoughts on that are the Crunch pliers are significantly better, but you have to "build" them before each use. As regards everything else, I find the Grappler is superior - namely longer drivers, better knife blade, prybar, more function, outboard and OHO throughout. It's also compatible with one of Gerber's hex driver tool kits - whereas the Crunch in comparison has a built in hex slot, but with no magnetic retention and you have to remove the adjusting screw which could easily be lost, rendering the tool an expensive paperweight.
I'd be very interested in seeing a Crunch vs Grappler go head-to-head though
as many people write off the Grappler immediately due to the plier capacity or slightly more fiddly means of adjustment, therefore "protecting" the failings (in my eyes) of the Crunch from appearing overshadowed by the Grapplers strengths -
@JAfromMn said:
Between us id rather do the swisstool but I don't think using my old one would be fair.OK I need a excuses to buy a new one.

:D I know what you're saying. Some MTs are just
. Sadly, I can't justify the funds for further MT research for the time being, nor can I say that I use the ones I have a lot. I keep them for the times they'll come in handy, which means sporadically. It's good to know what can be done with a given MT, so I'm grateful for these reviews/torture tests 
@50ft-trad said:
I'd be very interested in seeing a Crunch vs Grappler go head-to-head though
as many people write off the Grappler immediately due to the plier capacity or slightly more fiddly means of adjustment, therefore "protecting" the failings (in my eyes) of the Crunch from appearing overshadowed by the Grapplers strengthsAs usual, you raise a good point. For me, those two MTs have >:D too many moving parts >:D and that's the devil's lair for me. :-\

-
Its 25 degrees below zero and the wind chill is 31 bellow.
today I am going to pack the oht with snow / ice let it sit for about 10 minutes and see if I can get it open afterwards.
i got a few things to do first but that's the plan for today.
my main goal for today is to stay unfrozen.

-
The OHT challenge is back!

-
@CanadianLMfan said:
The OHT challenge is back!
for a short time only.
there is a test that needs doing before I can say much more.
I don't know if the oht will pass or not
well see in about a half hour or so.
-
So what is the next MT that you are going to do a "30 day challenge" on? :D
Swisstool? Super Tool 300? Swisstool X?

-
@sir_mike said:
So what is the next MT that you are going to do a "30 day challenge" on? :DSwisstool? Super Tool 300? Swisstool X?

Il be doing something with a st300
I got a idea
but it will have to wait until things slow down at work.
after the the new year.
its a idea that exploded in my head but I didn't take the hint so it exploded again. Lol
the only one that gets joke is me

-
Well my cold weather test on the oht came out a little unexpected.

I might have got a little carried away but it could easily happen my world

I tumbled the oht around in snow while packing it into the blades and the body. THEN I Used a bottle of WATER with a spray head and sprayed water all over the tool. Inside + outside
results
the oht pliers would not fully open after I smacked it around to remove the ice I could

I tried very hard using gloved and bare hands to try get it open.
it would not open until I brought it inside.
the outside opening blades and tools all opened / locked after a little struggle .
I didn't get a pic of the outside tools because I dropped my phone in the snow. Dam it. It works but still pisses me off.
well I think the oht will spend its life inside in the winter.
its way better that I know now than find out later.
still sucks. I was going to start edcing it.
if one of the mods could fix my pics it would be much appreciated. I can't get anything but what I posted.
-
Done. :D
-
That's a bummer Joel, but at least you know what to expect in winter weather.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login