The 30-Day Rebar Challenge!
-
I don't seem to have a problem with the pliers. At least they're (the cutters) angled to allow for decent gripping.
-
I don't characterize as problematic the fact that the Rebar's cutters serve as part of the pliers' gripping surface, as pliers with non-replaceable cutters work in the same way (depending on the size of the stock being manipulated). The only caveat is that the Rebar's main plier surface is smaller than that of the Wave, for example (about 5 ridges on the Rebar vs. about 7 on the Wave). I bet that the Leatherman engineers have this one figured out. Mr. Sawman is right about the Rebar's cutter's being angled (unlike those of the Wave, etc.).
-
@Etherealicer said:
Anyways, when does the torture start? I want to see val fighting for her life
It'll get heavier this evening for sure, but in the meantime rest assured that chipping ice absolutely destroys lesser tools.
-
Thanks for the great answer to my pliers question.
-
-
@50ft-trad said:
How do you think the rebar pliers work with the large cutters in the plier head.
I haven't used mine but it looks like they might get in the way.

Note that in this example there are 4 or 5 points of contact on the nut, and 2 of them are the cutters.Yeah, that was what I didn't like about the pliers too :-\
Did you try using the needlenose pliers? The pliers are one of the most unused tools on my LMs, but it's nice to have them.
-
Am I the only one here, sitting on the edge of the chair, while waiting for the tales of a new days torture? :o
Sendt fra min HTC One med Tapatalk
-
I too am waiting eagerly :ahhh
-
Day 5 was a theatre evening, but not a camera evening, because the director would hace (rightfully) burned up my face with laser eyeballs. Legit. But there was some real use, as promised!
I finally got a good chance to test the saw on two pieces of 1/2" dowel, which needed to be put into halves to stand in for swords. The saw worked just fine. I found it more comfortable to use with the handle unfolded.
I also got to play Super Hanger Snippy Time when a friend lost a script down a crack by a staircase. We needed a way to fish it out—a long way, preferable. The cutters bite through coat hangers like they aren't even there (the coat hangers,, that is. The pliers were definitely there.) Nice, smooth cuts! After the script was saved, I went ahead and snipped the rest of the hanger into tiny pieces (boredom!) The cutters have taken no damage, and continue to make nice, clean cuts.
Day 6 was also Theatre Evening Super Good Yes Time, though I had a day of work first.
Don't ask me how someone managed to get .7 lead all the way down the tip of a .5 mechanical pencil, but I needed a straight pin and a small hammer to break it back out. I had the pin, but I didn't have a hammer.

Just kidding! I totally did! A Leatherman hammer with pliers in!Unbelievably, it totally worked!
Later, I needed a table saw, so I needed something to push some plywood through without removing and/or re-landscaping my arm. Thanks, Val!

They say "no pain, no gain", but I've always preferred "no pain, no pain."Now, since I'm attaching this plywood to a longboard (to make a longerboard, or possibly a longestboard) for someone to roll around with onstage, I also rasped off some ragged edges. The main blade did great, and doesn't require any sharpening yet, either.

I assume "rasp" is short for "raspberry".I didn't get a picture of the four refrigerator boxes Val had to cut apart to make a cardboard house, but I didn't have a utility knife, and the Rebar's main blade made nice clean cuts. It miraculously still doesn't need sharpening. Heavy corrugated cardboard is usually hot murder on knife blades. I'm impressed.
Days 5 and 6! Aww yeah!
-
Awesome day!

-
Great couple days there Jothra

-
I've found the Rebar's blade to hold a pretty good edge also.

-
I'll admit it, I drive a desk, so my tools usually get pretty light duty. But this Rebar so far is getting naptime. Lets bring the pain! :D
-
This thread is tempting me to bring my multitool to work.
I'm not going to but I'm tempted
-
@ironraven said:
I'll admit it, I drive a desk, so my tools usually get pretty light duty. But this Rebar so far is getting naptime. Lets bring the pain! :DI'm in the same position-desk jockey ;) Well, for the most part anyway. I am out and about doing things off and on, but not much that requires MT/SAK usage. However, I have a Rebar, and I too want to see what it can do when put to the test. Bring it

I know Jothra isn't in the same line of work anymore though, so Val may not get put through the same torture that Vicky did.
-
I'll admit it, I drive a desk, so my tools usually get pretty light duty. But this Rebar so far is getting naptime. Lets bring the pain! :D
I'm in the same position-desk jockey ;) Well, for the most part anyway. I am out and about doing things off and on, but not much that requires MT/SAK usage. However, I have a Rebar, and I too want to see what it can do when put to the test. Bring it

I know Jothra isn't in the same line of work anymore though, so Val may not get put through the same torture that Vicky did.
No excuses, we (or at least I) want to see how much punishment Val can take. >:D
-
I'll admit it, I drive a desk, so my tools usually get pretty light duty. But this Rebar so far is getting naptime. Lets bring the pain! :D
I'm in the same position-desk jockey ;) Well, for the most part anyway. I am out and about doing things off and on, but not much that requires MT/SAK usage. However, I have a Rebar, and I too want to see what it can do when put to the test. Bring it

I know Jothra isn't in the same line of work anymore though, so Val may not get put through the same torture that Vicky did.
No excuses, we (or at least I) want to see how much punishment Val can take. >:D
I do want to see Val pushed in the same manner Vicky was. Maybe Jothra will find some creative ways to test the Rebar in this theatre setting...
-
The Rebar named Val is the star of the theatre no matter what play is actually being performed.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
