Help dating a Small Tinker?
-
I think I bought this Small Tinker in 1969, but I'm not sure... a lot of knives have passed through my hands since then. Would one of you experts help me out? A couple of notes: While the picture doesn't show it very well, there is a file surface on one side of the Phillips driver. There is no slot in the Phillips driver. The knife never had a split-ring attachment point. The small spear blade has been reshaped. The reamer has no hole. Does that narrow it down to a range of dates? Thanks for reading!





-
based on the small blade, Pre 1973 is a pretty good guess.
-
Sorry, I should have said it differently. The small cutting blade was originally a spear blade which I filed down to its present "clip" shape around 1995.
I used to pass the time while camping by whittling odds'n'ends like chains and little figures. Even though I was collecting traditional slip-joint whittlers at the time, I found the size and smooth handle (no corkscrew) on this Small Tinker made it almost ideal for my purposes. Once I filed the small spear blade to a clip it was ideal. On fir and other soft woods it held an edge nicely, too.
-
The " +PAT " on the can opener was used from the late 60s, to the early 70s
if you are saying the small blade was originally shaped like the middle blade in this picture, then it is 1973 or later,
if it was originally shaped like the bottom one in the picture, then it would be 1973 or before.
I am not the SAK expert by any stretch, I am learning, but I try, and if I am wrong, maybe someone will correct me.
-
@detron said:
The " +PAT " on the can opener was used from the late 60s, to the early 70sif you are saying the small blade was originally shaped like the middle blade in this picture, then it is 1973 or later,
if it was originally shaped like the bottom one in the picture, then it would be 1973 or before.
I am not the SAK expert by any stretch, I am learning, but I try, and if I am wrong, maybe someone will correct me.
Thank you, Detron, for helping me sort that out. Here is the way the blade looks today:

I must be imagining that I modified that blade. There's no way the nail nick could be intact if I had reshaped a spear blade to the present shape. Ain't it grand when your first post on a new forum makes you look like an idiot?! Oh well, I'll try to do better in the future... It has been a great little knife and has stood up to four decades of use. You gentlemen are fully justified in your enthusiasm for Victorinox.
-
The " +PAT " on the can opener was used from the late 60s, to the early 70s
if you are saying the small blade was originally shaped like the middle blade in this picture, then it is 1973 or later,
if it was originally shaped like the bottom one in the picture, then it would be 1973 or before.
I am not the SAK expert by any stretch, I am learning, but I try, and if I am wrong, maybe someone will correct me.
Thank you, Detron, for helping me sort that out. Here is the way the blade looks today:

I must be imagining that I modified that blade. There's no way the nail nick could be intact if I had reshaped a spear blade to the present shape. Ain't it grand when your first post on a new forum makes you look like an idiot?! Oh well, I'll try to do better in the future... It has been a great little knife and has stood up to four decades of use. You gentlemen are fully justified in your enthusiasm for Victorinox.
You did not look like an idiot, that was a long time ago. And on this forum, people are respectful and try to be helpful.
Welcome to Internet perfection.
I have made my own fair share of goofs too
Sent from my SPH-L720 using Tapatalk
-
I'd estimate circa 1965-1969.
-
Jazzbass is a sak dating expert so he is most likely correct.
-
@Nhoj said:
Jazzbass is a sak dating expert so he is most likely correct.Thanks to all for your replies and I think that settles it. In the late 60's I was starting to backpack in the Sierra Nevada and I believe I mail-ordered the knife from an outfit called "Moor & Mountain". No idea what I paid, but since I was making about $350 a month, the purchase was important to me. It has been a great knife and I carried it often over the years, but it is now retired. Almost 45 years of use and still fully functional... I worked about that long and I wish I could say the same!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
