The 30-Day Rebar Challenge!
-
The awl is about the only thing I've used and not liked on my Rebar, which is why a Climber may be a better companion than a Compact. But then there are too many screwdrivers and can openers!
@Monrogue said:
I do want to see Val pushed in the same manner Vicky was.First time I read that, it was misread VERY dirty.
-
I do like the Victorinox reamer but it has the tendency to fold. The spirit reamer isn't the same but I like it better because it locks.
-
@ironraven said:
The awl is about the only thing I've used and not liked on my Rebar, which is why a Climber may be a better companion than a Compact. But then there are too many screwdrivers and can openers!I think I like the awl, because of the more durable edge. This means that it will function nicely as both a reamer, Victorinox-style, and as a pokey, Wenger-style.
I do want to see Val pushed in the same manner Vicky was.
First time I read that, it was misread VERY dirty.
Oh my yes.
@Nhoj said:
I do like the Victorinox reamer but it has the tendency to fold. The spirit reamer isn't the same but I like it better because it locks.Also, I wouldn't want to hammer the Victorinox reamer into something, because that would involve hammering directly on all the closed tools, unless one wanted to get creative.
-
While I'm loving this challenge, I'm not so sure if my tools do. Reading about your uses has gotten the brain juices flowing. I've already utilised the flat side of the Piranha as a palm tapper to budge a tight lock so I could shove it open and my modded Rebar as a hammer to pop open a jammed lock (Yeah... I do encounter a metric tonne of locks at work...) that would otherwise require the usual kick dancing maneuver due to its chest-height. :D
Woohoo! I can finally open and close the push-pin locks that are gummed/rusted shut! :ahhh
-
@Jothra said:
Edit: I forgot to mention that the second bed needed some 1" plywood spacers to keep the boxspring from sitting funny on the rope, and my old spacers had been thrown out. I cut a 2" strip using a table saw, then cut it into four pieces with Val's saw. Cutting plywood is a huge chore for any hand saw (by virtue of the layering, obviously), but Val handled it like a pro. A very slow pro, but a pro. The saw still seems like new.I meant to say I used the table saw for 2' strips, not 2". then I cut it into four 6" strips. Criminey, but the imperial system messes with my internal Jothrometer.
-
Your rebar is holding up great.
I am starting to think that the stainless steel finish is the way to go for work tools.
all that wire work would mess up a bo tool for sure.
-
The Rebar will definitely survive this challenge.

-
@JAfromMn said:
Your rebar is holding up great.I am starting to think that the stainless steel finish is the way to go for work tools.
all that wire work would mess up a bo tool for sure.
True, unless you think of scratched black oxide as adding patina. I know I love scratches on tools. Not that I have much of a choice.
@CanadianLMfan said:
The Rebar will definitely survive this challenge.
Probably, but when I need to get into heavy prying, I'll have to watch the prybar/slot driver. I broke one completely out of my Wave a couple years ago.
-
As promised: 3-2-1, I'm the booooo-ooooomb!

It looks jet black in person. The light levels are awful in this shot.Day 9 is, unfortunately, photo-free. Darn and shucks heck!
Anywayne, Val's still on Reaming Squad, and is actually moving up in the ranks! We needed five holes drilled in a piece of 1/2" plywood so we could wire it into an old bassinet as reinforcement (so we can stick a 10-year-old in there. Classy?) The drill was in a far-off basement. So I found something about in-line locking Rebar reamers: they kick ass. The holes were all completely done in less than a minute. For real! I am pretty impressed.
We attached the wood with tie wire, because when all you have is a hammer, every problem needs tie wire (I think that's how the saying goes). Val is already famous around here for fantastic wire cutting and tying feats.
The pliers also bent two bungee strap hooks together to link the straps into the Bungeezord. Industrial-grade bungee hooks require a hammer (or at least a damn lot of plier force) to bend in, but the aroind-the-house type worked well with Val's pliers.
There still isn't any significant tool damage, and I'm really impressed with the reamer so far. Thanks, Rebar, for a wonderful Day 9!
-
Nice day 9
That awl is pretty beefy. -
Nice day 9
That awl is pretty beefy.You should see the ST300 awl!
you will
-
I have to admit that I have been coming to the LM sub-forum because and only because I learned Jothra was doing one of his 30-day challenges here. Keep up the good work!
-
Another great challenge!

-
I won't be doing anything until the rebar challenge is over.
I'm enjoying reading about the rebar now.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
