91mm OHO?
-
Well there are other problems with a OHO 91 too. The backspring is a bit too strong to open easily where the hole would be. So it would have to be weakened. Then since its not a lock blade, its not snaped open and held as firmly. A OHO liner or frame lock 93 would be doable. Id keep a backspring on it for retention when closed, and have a nice lock on open. Oh boy. Someday.
-
@lowtech said:
you might want to check out Wengers Titanium Series - While not the most beatiful SAKs on the Planet to most, they offer OHO and added capapaility like hex wrenches, Bit holder and Titaium scales with a locked blade.I have seen them, though the limited choice of tools is what keeps me from them so far.
-
@Syph007 said:
Well there are other problems with a OHO 91 too. The backspring is a bit too strong to open easily where the hole would be. So it would have to be weakened. Then since its not a lock blade, its not snaped open and held as firmly. A OHO liner or frame lock 93 would be doable. Id keep a backspring on it for retention when closed, and have a nice lock on open. Oh boy. Someday.Thanks for the info, would sending you some Swiss Chocolate help? Not for you, but for your significant other, so you can spend more time in your workshop

Wait, I'm not sure I understand. Could you do a OHO liner or frame lock for a 93 or is there a 93 that has one and could be fitted into the 91 (If the second, which model would that be)?
-
Well there are other problems with a OHO 91 too. The backspring is a bit too strong to open easily where the hole would be. So it would have to be weakened. Then since its not a lock blade, its not snaped open and held as firmly. A OHO liner or frame lock 93 would be doable. Id keep a backspring on it for retention when closed, and have a nice lock on open. Oh boy. Someday.
Thanks for the info, would sending you some Swiss Chocolate help? Not for you, but for your significant other, so you can spend more time in your workshop

Wait, I'm not sure I understand. Could you do a OHO liner or frame lock for a 93 or is there a 93 that has one and could be fitted into the 91 (If the second, which model would that be)?
I have plans to make a 93 frame lock. Its just much easier to work on those compared to the 91s. The problem I get into is when people ask me to do a mod I rarely turn it down, so I have a long list of customer mods to finish, before I can get time to do new prototyping. Currently I am fitting an exacto knife holder into a 93mm alox mod. So far so good. :D
-
Well there are other problems with a OHO 91 too. The backspring is a bit too strong to open easily where the hole would be. So it would have to be weakened. Then since its not a lock blade, its not snaped open and held as firmly. A OHO liner or frame lock 93 would be doable. Id keep a backspring on it for retention when closed, and have a nice lock on open. Oh boy. Someday.
Thanks for the info, would sending you some Swiss Chocolate help? Not for you, but for your significant other, so you can spend more time in your workshop

Wait, I'm not sure I understand. Could you do a OHO liner or frame lock for a 93 or is there a 93 that has one and could be fitted into the 91 (If the second, which model would that be)?
I have plans to make a 93 frame lock. Its just much easier to work on those compared to the 91s. The problem I get into is when people ask me to do a mod I rarely turn it down, so I have a long list of customer mods to finish, before I can get time to do new prototyping. Currently I am fitting an exacto knife holder into a 93mm alox mod. So far so good. :D
But isn't the 93mm frame much more limited when it comes to tool choice, e.g. the inline Philips Screwdriver?
-
Well there are other problems with a OHO 91 too. The backspring is a bit too strong to open easily where the hole would be. So it would have to be weakened. Then since its not a lock blade, its not snaped open and held as firmly. A OHO liner or frame lock 93 would be doable. Id keep a backspring on it for retention when closed, and have a nice lock on open. Oh boy. Someday.
Thanks for the info, would sending you some Swiss Chocolate help? Not for you, but for your significant other, so you can spend more time in your workshop

Wait, I'm not sure I understand. Could you do a OHO liner or frame lock for a 93 or is there a 93 that has one and could be fitted into the 91 (If the second, which model would that be)?
I have plans to make a 93 frame lock. Its just much easier to work on those compared to the 91s. The problem I get into is when people ask me to do a mod I rarely turn it down, so I have a long list of customer mods to finish, before I can get time to do new prototyping. Currently I am fitting an exacto knife holder into a 93mm alox mod. So far so good. :D
But isn't the 93mm frame much more limited when it comes to tool choice, e.g. the inline Philips Screwdriver?
Check his signature line thread. ;) In line phillips is a standard 93mm option for Syph007. :D
-
Well there are other problems with a OHO 91 too. The backspring is a bit too strong to open easily where the hole would be. So it would have to be weakened. Then since its not a lock blade, its not snaped open and held as firmly. A OHO liner or frame lock 93 would be doable. Id keep a backspring on it for retention when closed, and have a nice lock on open. Oh boy. Someday.
Thanks for the info, would sending you some Swiss Chocolate help? Not for you, but for your significant other, so you can spend more time in your workshop

Wait, I'm not sure I understand. Could you do a OHO liner or frame lock for a 93 or is there a 93 that has one and could be fitted into the 91 (If the second, which model would that be)?
I have plans to make a 93 frame lock. Its just much easier to work on those compared to the 91s. The problem I get into is when people ask me to do a mod I rarely turn it down, so I have a long list of customer mods to finish, before I can get time to do new prototyping. Currently I am fitting an exacto knife holder into a 93mm alox mod. So far so good. :D
But isn't the 93mm frame much more limited when it comes to tool choice, e.g. the inline Philips Screwdriver?
Ya its exactly the opposite. The 91mm tools are very specific to the pivot and spring used. The 93 is almost generic where all pivots are the same shape. It makes it very easy to mix and match tools.
-
@Syph007 said:
Well there are other problems with a OHO 91 too. The backspring is a bit too strong to open easily where the hole would be. So it would have to be weakened. Then since its not a lock blade, its not snaped open and held as firmly.This is the "problem" that I think can be solved by recontouring the closed side of the tang so the closing snap is much reduced. Think of rounding off the inner corner so that as the blade is opened it doesn't have to push the backspring up so much. In fact it could almost be made into a radius around the pivot and rely on friction to hold closed.
This would still allow for the full strength of the spring to hold the blade in the open position.I was going to play around with some mockups but I guess I could be a geek and do it in Inventor.
-
-
Looks like a Scibeer mod. I am not sure. It was on Sosak.
sent from Nate's mobile
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
