What Did You Use Your Multitool For Today?
-
I trimmed the ends off some push pins so they would work better on my corkboard at work.
-
Gerber Balance:
My next door neighbour collared me this evening to help him carry the ENORMOUS headboard for his new bed upstairs. Phillips screwdriver used to remove a door so we had more clearance for getting the headboard jammed on the staircase

After trying a few different ways we decided it simply wouldn't fit, so plan B was to unwrap it and look at the construction to see if it was dismantleable. Knife and scissors used for unwrapping it, flat driver for lifting upholstry staples so the pliers could pull them out and we could ease back the fabric to check what was beneath. One solid board :-\ Tomorrow we'll be carrying on with the plan, but we'll be needing a tool the Balance doesn't have .... circular saw
-

Can't you get it in through the window, balcony or something?
-
Nope :-\ The board is MDF, so next plan is carefully peel the backing fabric and part of the faux leather front. Set circular saw blade 1mm less than thickness of the board and cut from back. Bend toward front to bend/break the board effectively hingeing it so we can get it upstairs. Unfold, trim any untidy edges on the break, and stitch the back with reinforcing strips, replace and restaple the fabric to cover the damage ... and then eagerly await the screams through the wall in the middle of the night when it fails, folds double and smacks him in the face

-
Used MY new BO Spirit X to unbox some new inventory at the shop. I'm REALLY loving this Spirit!¡! I can see what all the hype was about

-
@stealth007s said:
Used MY new BO Spirit X to unbox some new inventory at the shop. I'm REALLY loving this Spirit!¡! I can see what all the hype was about
Isn't surprising how many of us end up saying that! You need a SwissTool next

-
Isn't surprising how many of us end up saying that! You need a SwissTool next

I'm already looking, no need to poke
Which model though? I'm looking at all of them but I am thinking the RS. I would prefer one with scissors, that's my only must have.I have two,and like you,I'd prefer one with scissors. Neither of mine do,and I've do complaints :D,but then,I always have a SAK to hand...unless I've been testing the Fit :ahhh
-
@50ft-trad said:
Nope :-\ The board is MDF, so next plan is carefully peel the backing fabric and part of the faux leather front. Set circular saw blade 1mm less than thickness of the board and cut from back. Bend toward front to bend/break the board effectively hingeing it so we can get it upstairs. Unfold, trim any untidy edges on the break, and stitch the back with reinforcing strips, replace and restaple the fabric to cover the damage ... and then eagerly await the screams through the wall in the middle of the night when it fails, folds double and smacks him in the face

Mission accomplished, other than the smack in the face :P and the Balance was called on again for staple removal and pulling fabrics taut
-
@kirk13 said:
I have two,and like you,I'd prefer one with scissors. Neither of mine do,and I've do complaints :D,but then,I always have a SAK to hand...unless I've been testing the Fit :ahhhA very good reason to carry a SAK with scissors then. I do that with my LM products w/o scissors. I'll carry my S4 since I can't find my Micra. I think it fell off my keyring
it's the oldest tool I own with date codes. My Huntsman & SwissChamp are older but no dates.Sent from Endor via an Ewok
-
Used my Sog Powerlock to cut a bunch of wire and crimp ends on the wires for a Ford 8N
Figured out the seat beat cutter makes a sweet wire stripper.
sent from Nate's mobile



-
I used my Rebar today to screw screws with the screwdrivers, make holes with the awl, pull screws and tighten some nuts with the pliers and cut tape with the blade.

-
@Dr. Bahn said:
I used my Rebar today to screw screws with th screwdrivers, make holes with the awl, pull screws and tighten some nuts with the pliers and cut tape with the blade.

Sounds like the Rebar had a busy day huh?
Yes, it had a lot of work to do. 8) But I am still waiting for something to try the 154CM wire cutters on. :D
-
@Dr. Bahn said:
@Dr. Bahn said:
I used my Rebar today to screw screws with th screwdrivers, make holes with the awl, pull screws and tighten some nuts with the pliers and cut tape with the blade.

Sounds like the Rebar had a busy day huh?
Yes, it had a lot of work to do. 8) But I am still waiting for something to try the 154CM wire cutters on. :D
You could always snip up a coat hanger or a fence or something
Of course someone may not appreciate that, depending on whose coat hangers or fence you cut up ;) -
@Dr. Bahn said:
@Dr. Bahn said:
I used my Rebar today to screw screws with th screwdrivers, make holes with the awl, pull screws and tighten some nuts with the pliers and cut tape with the blade.

Sounds like the Rebar had a busy day huh?
Yes, it had a lot of work to do. 8) But I am still waiting for something to try the 154CM wire cutters on. :D
You could always snip up a coat hanger or a fence or something
Of course someone may not appreciate that, depending on whose coat hangers or fence you cut up ;)
Great idea! Hmmm, let´s see... :D ;) -
@Dr. Bahn said:
@Dr. Bahn said:
[quote author=Dr. Bahn link=topic=12238.msg801249#msg801249 date=1384369088]
I used my Rebar today to screw screws with th screwdrivers, make holes with the awl, pull screws and tighten some nuts with the pliers and cut tape with the blade.
Sounds like the Rebar had a busy day huh?
Yes, it had a lot of work to do. 8) But I am still waiting for something to try the 154CM wire cutters on. :D
You could always snip up a coat hanger or a fence or something
Of course someone may not appreciate that, depending on whose coat hangers or fence you cut up ;)
Great idea! Hmmm, let´s see... :D ;)
[/quote]Haha, happy hunting

-
Style PS got some Zip-Tie cutting duties today.
-
Yesterday my Vic Spirit X was used to adjust eyeglasses and later the scissors came in handy to remove tags off of some ornaments.
Then around midnight the knife came in handy to cut the tape off my new PS4 :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login