What did you use your Sak on today?
-
@nate j said:
Last weekend:I used my Climber to fix my son's toy rocket. It only required the strategic removal of a small amount of plastic to take the toy from total dud to fully functioning.
I also used my Cigar Cutter to punch cut several cigars. It worked like a charm.
Is that the Vic cutter, the one with the 3 different punches? If so, how do you like it? I'm very curious about that one. Though I don't punch cut my cigars too often, the Mrs likes the punch cut for hers so I may get this one for her Xmas stocking. -
Hunter on some boxes and straps. Apparently people like to leave their junk from moving all over the place and it felt like cutting a path trough an unexplored jungle
-
What are you gonna do with those squirrels??
Cook them, what else! JR
Mmmmmm.....squirrel.....
You ever tried cooking them on a grill?sent from Nate's mobile
I've never had them myself, but they look kinda like chicken...which I suppose is how a lot of things supposedly taste anyway ;) Can't say I'm eager to try it though :P
-
@derekmac said:
Used my OHT to break down some boxes so far. Cut through them like a hot knife through butter.Sent from my iPhone 5 using Tapatalk
It does doesn't it? I cut one the other day with my OHMRT. I normally use the Rebar's serrated blade, and had been for a bunch of other boxes, and decided to give the OHMRT a try at it. It easily and quickly sliced right through. It was also one of those diaper boxes, so a bit more tough than normal cardboard.
-
@KiwiMark said:
Went to make dinner, needed a hamburger patty but 2 were partially frozen together and I just needed a little prying action to separate them. I had my Victorinox Ranger on my belt so I grabbed that and opened out the pry tool (the one that can be used as a cap lifter) - easily separated the 2 meat patties and used one to make my burger, mmmm burger!Don't you mean the cap lifter (the one that can be used as a pry tool)?...

-
@pfrsantos said:
Don't you mean the cap lifter (the one that can be used as a pry tool)?...
Wait, are you trying to tell me that the pry tool/screwdriver didn't just have a cap lifter added to it to give it more functionality? Well I never . . .
But for me I probably used the tool as a cap lifter less than 10 times over the last decade, on the other hand as a screwdriver or a pry tool I've used it plenty of times. -
I used my oldschool Explorer's magnifier to inspect the Damascus/Damasteel on my new 2010 Pioneer.

:D
-
Don't you mean the cap lifter (the one that can be used as a pry tool)?...

Wait, are you trying to tell me that the pry tool/screwdriver didn't just have a cap lifter added to it to give it more functionality? Well I never . . .
But for me I probably used the tool as a cap lifter less than 10 times over the last decade, on the other hand as a screwdriver or a pry tool I've used it plenty of times.Actually I believe it works better as a lightweight flat screwdriver and pry tool than as a cap lifter. As a cap lifter it sometimes takes a little trial and error to lift the cap out of the bottle, it seems to slip easily.
-
It was not today, but in the last few days. I have been using my Explorer and my Minichamp to open and regulate an 20 or 30 years old Lanco automatic watch. It was loosing a minute a day, so I thought maybe it was an easy task to make it move a little faster.
At first I was using the orange peeler to side pull the case back of the watch. That was a big mistake: it seemed to work, but I made some deep scratches in the surface. Lately, I have been using the Phillips screwdriver in the Minichamp to push and unscrew the case back. I works ok and there are less scratches.
I used both toothpicks, and also tried some of the pointy metal tools, to move the small levers in the watch movement. I must say, I nearly ruined that nice watch. I had no background knowledge in this whole watch thing, and none of the specialized tools that watchmakers use. For instance, I had nothing keeping the watch still and both hands free to work on it. So it was very difficult to move the little levers without touching the balance wheel or the hairspring. Then, right in the first time I moved one of the levers (I knew I should only touch one of them, as the other is related to isochronism and very difficult to regulate without a timing machine), both levers moved simultaneously. I tryied to correct it, but the result after a fee tries was a watch out of beat. It started loosing 2 minutes a day and, worse than that, it became prone to stop suddenly several times a day. I had messed up the whole thing and I just hoped that I had not broken the hairspring or bent the balance wheel.
Finally, yesterday, after spending the whole day thinking about paying a professional watchmaker to fix the sh*t I made, I decided to give it one more shot. I didn't have a timing machine, but I had my ears and a computer. So I got a microphone and started amplifying the sound of the watch movement. I used an audio editing software to make it slower, in order to make the time lapses a little more noticeable and tried to make the intervals more regular.
I managed to make it at least a bit more regular, as much as I could notice the difference by just hearing the tictac sound. I closed the watch one more time, and it has been running smoothly for a full night and a full day. It has lost about 20 seconds in a day. If it remains stable, I will consider that a success. and I promise I won't be touching again the guts of a wrissmurfch anytime soon :-)

-
@nate j said:
Last weekend:
I used my Climber to fix my son's toy rocket. It only required the strategic removal of a small amount of plastic to take the toy from total dud to fully functioning.
I also used my Cigar Cutter to punch cut several cigars. It worked like a charm.
Is that the Vic cutter, the one with the 3 different punches? If so, how do you like it? I'm very curious about that one. Though I don't punch cut my cigars too often, the Mrs likes the punch cut for hers so I may get this one for her Xmas stocking.Yes, it is the Vic cigar cutter with the three different punches. I've only used it a couple of times, but I really like it thus far.
Pros
- Leaves a nice clean hole that isn't too deep
- Requires minimal time and effort to use, and operation is almost foolproof (especially when compared with my previous usual method of using a knife blade to remove the cigar cap, which took more time and care to avoid buggering up the cigar)
- In spite of being a bit thicker and heavier than its cousin the Vic Money Clip, the Cigar Cutter is still very pocketable
- In addition to the unique cigar-cutting implement, it has the same main blade, nail file, and scissors as the Money Clip, so it also serves ably as a gent's knife or small companion to a larger SAK/MT
- Three different size punches provide flexibility to accommodate various cigar sizes and or personal preferences
- Unlike some other punches, there is no removable cap to come off or lose
- Open-on-both-ends design makes it easy to remove the cut out from the punch
- Typical Vic quality, F&F, W&T, etc.
Cons
- Price - I paid just under $50 for mine earlier this year, and think I got a pretty good deal considering Amazon now has them around $65. This puts them on the expensive side for current production factory SAKs, but isn't bad when you consider that (1) it really replaces both a small SAK and a dedicated cigar cutter/punch, and (2) Vic has to recoup the cost of the unique cigar-cutting implement found only on this model.
- Not sure how well this (or any punch, for that matter) would work on a torpedo or similar-shaped cigar. Of course, you could always use the main blade if you came across a cigar that wasn't amenable to punching for whatever reason and you didn't have a different style cutter handy.
- Sharpening the punches - Vic says they are "laser-sharpened". I'm certain I don't have a laser-sharpener, and I'm not certain how much luck I would have trying to sharpen them with something else, e.g. ceramic rod. If they do get dull, I think my only real option will probably be to send the knife to Vic, but I'm hoping it will be a long time before this becomes an issue.
In summary, if you think someone in your house will use it, I highly recommend picking one up. It may even make a punch cutting convert out of you.
-
Thanks for the review Nate
I don't know anyone that uses a punch on a torpedo or belicoso type cigar. I sharpen my punch cutters using a Smith's diamond rod or I'll send them to the manufacturer depending on the brand, like Xikar. I wonder if you can send it back to Victorinox for sharpening 
Sent from Endor via an Ewok
-
@stealth007s said:
Thanks for the review Nate
I don't know anyone that uses a punch on a torpedo or belicoso type cigar. I sharpen my punch cutters using a Smith's diamond rod or I'll send them to the manufacturer depending on the brand, like Xikar. I wonder if you can send it back to Victorinox for sharpening 
Sent from Endor via an Ewok
No problem. TBH, I had to reach a bit to find some Cons. I did submit the question about sharpening to Vic, and will post the response in this thread if/when I receive one.
-
Don't you mean the cap lifter (the one that can be used as a pry tool)?...
Wait, are you trying to tell me that the pry tool/screwdriver didn't just have a cap lifter added to it to give it more functionality? Well I never . . .
But for me I probably used the tool as a cap lifter less than 10 times over the last decade, on the other hand as a screwdriver or a pry tool I've used it plenty of times.Actually, this is exactly what happened ;)
As you can see, the pry tool/cap lifter was only a pry tool/screwdriver, originally.
-
Don't you mean the cap lifter (the one that can be used as a pry tool)?...
Wait, are you trying to tell me that the pry tool/screwdriver didn't just have a cap lifter added to it to give it more functionality? Well I never . . .
But for me I probably used the tool as a cap lifter less than 10 times over the last decade, on the other hand as a screwdriver or a pry tool I've used it plenty of times.Actually, this is exactly what happened ;)
As you can see, the pry tool/cap lifter was only a pry tool/screwdriver, originally.Well, since I only use it to open beers and not to do any actual work, it's only natural I mix that up...

-
Today I used the blade on my Victorinox Classic to open a package.
-
Hunter on some lasagna. If it were a woman I'd marry it
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
