Wingman Mod
-
That´s a feeling well known to many members, I guess! I´ve seen some of "my" tools appear on different continents and am sure I did receive some that were passed through some hands.
I do like that.
And I´ll have a lookout for a PE blade - maybe I can squeeze in the small serrated one in the handle when i loose the washer/lanyard ring or leave out the Can opener.
If not, the Can opener should have enough material to make a nice Awl.
Oh, and thanks for teh nice words, folks - I hope I can finish this mod soon and nicely looking.
-
I'm liking it mate.

-
@Lynn LeFey said:
I might be one of the few people who generally LIKE the Wingman, but I have to admit the scissor upgrade you did was a vast improvement.And, I ALSO agree it needs a PE blade.
Very nice stuff.

I like the Wingman, except the blade's a bit crap and the scissors are really crap. A decent quality one would be a tool I'd be very pleased to recommend. The tool selection is good IMO.
-
Since I can out cut the Wingman's scissors with any Victorinox scissors this seems damn near mandatory... Heck, the 58mm scissors puts the Wingman's to shame.
Nice...
Got to try your trick to get rid the the head wobble... Not sure why you'd blunt the pliers though. I always find needle nose pliers work better for me. -
I used a sharp center punch to form an indent and tehn used a wider, flat punch to flatten the material that had risen beside the indent. That took care of most of the sideplay.
Blunt nosed pliers are more useful to me on a day to day basis than needlenose ones, although there are situations when a Needlenose woudl be nice.
I use the tools to hold nuts in confined spaces or to screw plumbing connectors tight and more often than not there is an obstacle nearby wher needle nose plierheads would catch and not allow me to tighten the conenction.
I won´t tell anyone to blunt their plierhead, but for me, this form works best.after a whole lot of life going on in the last weeks, I hope to find soem hours for shop-time tonight and finish the Wingman.
-
I've never been silent about my like of the 'Wingman' but I applaud you for trying to improve the beast.
I love the tool layout but the quality is lacking a little. mine gets it's fair share of pocket time and hasn't let me down.....ever !
what else have you got planned Thomas ?
I did get both wingman AND sidekick with the intention of swapping main blades, thinking the PE blade on the sidekick more desirable. But on reflection (and afterextensive testing'playing') I moved away from the idea. partly because I found the combo blade workable enough, great for rope and strapping, and paired with a 'vic Farmer' I have a lovely razor sharp PE blade and awesome awl. besides putting the serrated blade in the Sidekick seemed pointless (then it'd have 2 serrated blades ) no point in making the sidekick 'less desirable'
-
I don´t know what will happen to the Wingman in teh Future.
I did have a Sidekick, too for teh same approach as you had, but I traded it away for an old benchgrinder (That will become my polishing tool, hopefully).I would like to have a PE blade and teh small serrated from the Sidekick. I can imagine regrinding the Can opener (which i never use, I use a Vic should I have no dedicated Can Opener) to an Awl.
And sould I find a proper, fitting 3 D Phillips i could imagine putting it in, but then I´d have to find a way to incorporate a flat driver somehow.
-
No, you have to buy a SAK to tear apart.
But there are plentiful on eBay, if you find one with a bad blade it usually will go dirt cheap. -
Thomas, would a Victorinox PE Blade fit in a wingman ?
you have done a fine job with the scissors so why not the knife blade ? a blade from a 'farmer' would be super ::) I just held a farmer and wingman next to each other and they look about the same to me (but my poor old eyes are shot to bits) I know the farmer is a little bigger than the standard vic blade -
If I remember correctly, the Pivot area on the Vic blades is a bit small to assure a secure lock when open - I think I have a loose 108 and 111 mm blade lying around and I will check - They would make nice blades for my uses.
Thanks for your input.Sad that I won´t make it to teh shop tonight - There is laundry and dishes to be done and work to be prepared. My wife has her night out in town so it´s my turn.
But I don´t mind, she cuts me soem slack whenever I need.
Looks like I won´t make it there before sunday, though. -
@lowtech said:
If I remember correctly, the Pivot area on the Vic blades is a bit small to assure a secure lock when open - I think I have a loose 108 and 111 mm blade lying around and I will check - They would make nice blades for my uses.
Thanks for your input.Sad that I won´t make it to teh shop tonight - There is laundry and dishes to be done and work to be prepared. My wife has her night out in town so it´s my turn.
But I don´t mind, she cuts me soem slack whenever I need.
Looks like I won´t make it there before sunday, though.You've got a good wife there ;).
Sent from my iPhone using Tapatalk
-
Thanks. I know - But it´s good to be reminded of the fact. It´s easy to take it as granted. -
"good" ? poor Thomas is doing dishes AND laundry chores while she's OUT ''on the town", I know you're new to this married lark mate, so I'LL cut you some slack, but she needs training up !
if other women hear of this kind of freedom god only knows where it'll end
next they'll want to 'vote' and stuff ::)
I suggest you start off with a 4"x2" training stick and work up to a 'taser' if that doesn't do the job

-

I think we need to send you wife a short email, pointing out a thing or two... :D
-
@Taxi Dad said:
"good" ? poor Thomas is doing dishes AND laundry chores while she's OUT ''on the town", I know you're new to this married lark mate, so I'LL cut you some slack, but she needs training up !
if other women hear of this kind of freedom god only knows where it'll end
next they'll want to 'vote' and stuff ::)
I suggest you start off with a 4"x2" training stick and work up to a 'taser' if that doesn't do the job

Baahahahahahahaha!!!! Wait, what, women can vote now.........j/k
Sounds like you got a keeper.
sent from Nate's mobile -
Resurrection!
Wait - will the Overlords allow it or is that a banneable crime now just like off-topic posts?! :ahhh
What I wanted to say: I worked a bit on the Wingman and I´ll post pics soon.
And I have a question: Would a Sidekick without a mainblade be UK-legal? Say if you replaced the blade with a non-sharp tool?Would be a symbiotic mod as the Sidekicks PE feels good in the Wingman and i´d liek to do more to the Sidekick than just put in the serrated blade.
-
Pictures!
PE blade and 91 Vic scissors
Took away a bit of teh handle here
The Vic scissors tip sits on the plastic washer so that exactly teh Nail nic portion is exposed.
I´ll polish the ground areas, clean the tool and will have to widen the pivot hole a bit, the drill bit has created a too tight tolerance.
-
very nice Thomas

could you stick a pair of vic scissors in the sidekick (instead of the blade ? that'd be a cool too ::)) -
I still have the beat up Vic-Scissors from the proof of concept.
I did try to put the Wingman scissors in and put teh saw in teh blades place - No direct swap as teh rear end of teh saw is angled to smoothly engage the lock and you´d have to regrind teh angle the other way round.I´ll have a play once the wingman is ready.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




