What's your latest Leatherman?
-
I bought a new (used) OHT yesterday, today I used it at work. A real great MT, I really like it :)




-
So far ive been happy with the sidekick and used it more than my surge,not that it will replace it but its been a good week to test it out

Did you put it through any hard use? Just curious as I know the quality/durability factor seemed to be an issue for some. I don't really ever get to test my MTs to the limit so to speak, so it's hard for me to make any claims about quality/durability from first hand experience.
I would say i used it as hard as any dedicated tool,i did fold up the phillips today but no locks so this happens, the wirecutters cut coat hanger gauge tubing ok but not so well on some thicker electrical wires but ok on thinner,the blade is smooth and nice shape and sharp,a bit of up and down wiggle but nothing ill stress about,again a mt saves me from going back and forth to my tool bag,a 1/4 socket fits the phillips so you could use other bits

-
So far ive been happy with the sidekick and used it more than my surge,not that it will replace it but its been a good week to test it out

Did you put it through any hard use? Just curious as I know the quality/durability factor seemed to be an issue for some. I don't really ever get to test my MTs to the limit so to speak, so it's hard for me to make any claims about quality/durability from first hand experience.
I would say i used it as hard as any dedicated tool,i did fold up the phillips today but no locks so this happens, the wirecutters cut coat hanger gauge tubing ok but not so well on some thicker electrical wires but ok on thinner,the blade is smooth and nice shape and sharp,a bit of up and down wiggle but nothing ill stress about,again a mt saves me from going back and forth to my tool bag,a 1/4 socket fits the phillips so you could use other bits

Nice. I didn't know about the socket trick though. Not that I ever have/carry a socket and bits, but still handy to some I'm sure

-
So far ive been happy with the sidekick and used it more than my surge,not that it will replace it but its been a good week to test it out

Did you put it through any hard use? Just curious as I know the quality/durability factor seemed to be an issue for some. I don't really ever get to test my MTs to the limit so to speak, so it's hard for me to make any claims about quality/durability from first hand experience.
I would say i used it as hard as any dedicated tool,i did fold up the phillips today but no locks so this happens, the wirecutters cut coat hanger gauge tubing ok but not so well on some thicker electrical wires but ok on thinner,the blade is smooth and nice shape and sharp,a bit of up and down wiggle but nothing ill stress about,again a mt saves me from going back and forth to my tool bag,a 1/4 socket fits the phillips so you could use other bits

Nice. I didn't know about the socket trick though. Not that I ever have/carry a socket and bits, but still handy to some I'm sure

Ii had one in my altoid tin of bits in my pocket so gave it a go,works ok a little wiggly but does the job
i also like the build of this mt,its basic but has what i generally need, the wire stripper came in handy re-wiring a new light fitting 
-
[quote author=Zed link=topic=33794.msg801472#msg801472 date=1384415073]
So far ive been happy with the sidekick and used it more than my surge,not that it will replace it but its been a good week to test it out
Did you put it through any hard use? Just curious as I know the quality/durability factor seemed to be an issue for some. I don't really ever get to test my MTs to the limit so to speak, so it's hard for me to make any claims about quality/durability from first hand experience.
I would say i used it as hard as any dedicated tool,i did fold up the phillips today but no locks so this happens, the wirecutters cut coat hanger gauge tubing ok but not so well on some thicker electrical wires but ok on thinner,the blade is smooth and nice shape and sharp,a bit of up and down wiggle but nothing ill stress about,again a mt saves me from going back and forth to my tool bag,a 1/4 socket fits the phillips so you could use other bits

Nice. I didn't know about the socket trick though. Not that I ever have/carry a socket and bits, but still handy to some I'm sure

Ii had one in my altoid tin of bits in my pocket so gave it a go,works ok a little wiggly but does the job
i also like the build of this mt,its basic but has what i generally need, the wire stripper came in handy re-wiring a new light fitting 
[/quote]That's part of why I like it-it's a bit basic in comparison to many MTs. It has the basic things most people would commonly need (maybe not the little file/ruler, although it does have a flathead at the end) without a bunch of tools that many are less likely to need often. While I prefer to have a file and saw on my MTs, I can't honestly say I need them often enough to worry about it. I do like to have a nailfile if possible though (not that I use one daily, but it's nice to have when needed), and the diamond file works well for that, but the regular files not so much. As I stated when I first got my Wingman, it's practically ideal for my normal usage, and would be even more so if there was a diamond file on the other side of that little file. The spring loaded pliers really are a big factor, despite the fact that I really don't use them much. I just really like using them when I need to though, and that feature really helps make them easier to use

-
[quote author=Monrogue link=topic=33794.msg801551#msg801551 date=1384437425]
[quote author=Zed link=topic=33794.msg801472#msg801472 date=1384415073]
So far ive been happy with the sidekick and used it more than my surge,not that it will replace it but its been a good week to test it out
Did you put it through any hard use? Just curious as I know the quality/durability factor seemed to be an issue for some. I don't really ever get to test my MTs to the limit so to speak, so it's hard for me to make any claims about quality/durability from first hand experience.
I would say i used it as hard as any dedicated tool,i did fold up the phillips today but no locks so this happens, the wirecutters cut coat hanger gauge tubing ok but not so well on some thicker electrical wires but ok on thinner,the blade is smooth and nice shape and sharp,a bit of up and down wiggle but nothing ill stress about,again a mt saves me from going back and forth to my tool bag,a 1/4 socket fits the phillips so you could use other bits

Nice. I didn't know about the socket trick though. Not that I ever have/carry a socket and bits, but still handy to some I'm sure

Ii had one in my altoid tin of bits in my pocket so gave it a go,works ok a little wiggly but does the job
i also like the build of this mt,its basic but has what i generally need, the wire stripper came in handy re-wiring a new light fitting 
[/quote]That's part of why I like it-it's a bit basic in comparison to many MTs. It has the basic things most people would commonly need (maybe not the little file/ruler, although it does have a flathead at the end) without a bunch of tools that many are less likely to need often. While I prefer to have a file and saw on my MTs, I can't honestly say I need them often enough to worry about it. I do like to have a nailfile if possible though (not that I use one daily, but it's nice to have when needed), and the diamond file works well for that, but the regular files not so much. As I stated when I first got my Wingman, it's practically ideal for my normal usage, and would be even more so if there was a diamond file on the other side of that little file. The spring loaded pliers really are a big factor, despite the fact that I really don't use them much. I just really like using them when I need to though, and that feature really helps make them easier to use

[/quote]I cant see me using the ruler much but then i dont use the one on my surge and that option not on the older wave, the small flathead is usefull,file not so great but hey not all mt's are perfect

-
Just picked up a TTI, with bit kit and extender. Incredible tool. I've opened a couple
of bubble wrap pks. with the package opener and been tightening some knobs on kitchen
cabinets. My EDC was a Wave. I forget when I purchased it(15-20 yrs ago), but I figured I'd treat myself to an upgrade. My next Leatherman was going to be a Surge, but the more I read about
it, I knew that I had to have a TTI. The Surge may be next. -
@ Rusty the wave and TTi are excellent tools as im sure the Surge is as well. I used my TTI for a while but i didn't care for the cap crimper plier head on mine so i went back to the wave.
:ahhh my new acquisition just arrived and yes another PST and yes its the Japanese PST no less. I now have triplets with this particular one being the best example thus far in my collection.
-
@Aloha007 said:
@ Rusty the wave and TTi are excellent tools as im sure the Surge is as well. I used my TTI for a while but i didn't care for the cap crimper plier head on mine so i went back to the wave.:ahhh my new acquisition just arrived and yes another PST and yes its the Japanese PST no less. I now have triplets with this particular one being the best example thus far in my collection.
Very nice Aloha
I think you should share, you know it's not nice to share.......

-
one of these has a 2 broken parts and the other has a weird grind on the main blade. it would be wrong to send poorly working tools to memebers
so ill have to hang on to them for uh umm safe keeping haha. this one im happy to report is in great condition with all tools in tact and the main blade pretty sharp. my PST collection is steadily growing and while i know there are many version out there i keep my eye on the Japan stamped riveted ones. -
Nice PSTs Aloha.
You just need the hollow rivet PST now, that one seems pretty hard to find. -
-
@Aloha007 said:
one of these has a 2 broken parts and the other has a weird grind on the main blade. it would be wrong to send poorly working tools to memebers
so ill have to hang on to them for uh umm safe keeping haha. this one im happy to report is in great condition with all tools in tact and the main blade pretty sharp. my PST collection is steadily growing and while i know there are many version out there i keep my eye on the Japan stamped riveted ones.We could do a broken tool trade

-
one of these has a 2 broken parts and the other has a weird grind on the main blade. it would be wrong to send poorly working tools to memebers
so ill have to hang on to them for uh umm safe keeping haha. this one im happy to report is in great condition with all tools in tact and the main blade pretty sharp. my PST collection is steadily growing and while i know there are many version out there i keep my eye on the Japan stamped riveted ones.We could do a broken tool trade

just the thought is funny. can u imagine? i guess for the collector that has everything. -
Nice PSTs Aloha.
You just need the hollow rivet PST now, that one seems pretty hard to find.i know and believe me when i say I HAVE BEEN LOOKING
they are either very expensive or unicorns.And even when you do find one on eBay you will have to contend with all the other MTO'ers also trying to get one for their PST collection .....
;) (unless you get lucky enough to find one at your famous flea-markets
) -
@gregozedobe said:
And even when you do find one on eBay you will have to contend with all the other MTO'ers also trying to get one for their PST collection .....
;) (unless you get lucky enough to find one at your famous flea-markets
)I think you just hit his Staples Easy Button Greg

-
My Leatherman Mini Tool BO with Nylon sheath arrived today and like you can see it is in mint condition.
All blades look unused... except for the wire cutter!
The wire cutter seems to have seen some serious use and is heavily worn down. The edge is gone and the cutter is nearly flat now but still does its job well (only tried it with some paper clips yet). I guess the preowner tried to cut something to hard, the wire cutter edge chipped and he filed it down. It is a bit annoying since the rest of the tool is like new. However I barely use the wire cutter and it still works with cable and unhardened wire (most probably even with hardened wire) so I try not to think to much about this flaw. ;)Maybe I can find a second more used and cheaper one with intact pliers anywhere and exchange them then... ::)
-
Nice PSTs Aloha
Nice Mini Dr. Bahn
You two make me want more PSTs, and I am also thinking about getting a Mini eventually. I think the Mini would be a great, easily carried plier tool for those times when I don't really need a full size MT and really just want to have pliers available to compliment a SAK or, in particular, the OHMasterRT. -
@theDoc
That black thing doesn't fit in your collection of those shiny nice tools at all. :-\ Better give it to someone with a thing for black.

An early Christmas present of sorts. ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





