AA sized batteries
-
All my AA lights have Eneloops in them. Makes for cheap running and the Eneloops are easy to charge. I have a 4 bay, independant channel charger for them. I just put them in and forget about them.
I also have some lights that can take LiOn. LiOn batteries require a bit more care. I only use protected Japanese cells, with a Pila IBC charger. You also have to be careful if mixing cells in a light.
If my AA lights can also take 14500, I would only use 14500 it it offered a higher light output. For example, my Nitecore SRT3 can take 14500's, and offers double the lumens than on an Eneloop.
You are correct in that your old H51 cannot take 14500. Your new H52 can, but there does not seem to be any advantage.
http://www.zebralight.com/H52F-AA-Floody-Headlamp-Cool-White_p_132.html
-
L-ion batteries have a shorter run time compared to the LSD ones, for instance an AW 14500 battery is rated at 750 mAh and an eneloop AA is 2000 mAh. Also they run at a higher voltage (4.2 volts max fresh of the charger and a nominal voltage of 3.6V) compared to the 1,2 of the eneloops (I know it's a 1,5 battery but the eneloops are a bit lower than that). You could use it only in the ZL 52, the 51 doesn't support them and very few AA flashlights do. And no other devices support them so you can't reuse them as you'd fry anything else with them. (Radio, GPS, ....)
I've been thinking of getting a few for my 47s AA tactical but I'd carry eneloops as backup anyways.
Also, don't limit yourself to what's available from the UK. You can get very good protected AW batteries from lumens factory shipped to the UK in about a week. I've had very good delivery times from them and I know a few other members here had too.
-
to Eneloops. My oldest cells are about 5 years old, still going strong. -
So, I'm better off with LSDs rather than 14500s basically? There's no point in paying a huge price premium for negligible performance gain and massive increase in explosion liability.
Thanks :)
I have a Fenix LD10 that gets less use, and that gets a bit funny with the higher voltages IIRC so another point to the LSDs.
So, I think that's batteries sorted. What about a decent, idiot proof charger that isn't too expensive?
-
Bear in mind that 14500 batteries are not the same voltage as AA batteries, despite the same size.
So make sure your torch can take them (4.2V instead of 1.5V). If it can not then you will damage your torch.
The nitecore Intellicharger i4 charger http://www.nitecore.com/productDetail.aspx?id=18 is quite popular, fast, versatile and cheap; around $20 nowadays.
Have a look in the charger/battery thread for more information.
The mAh are relevant but bear in mind that the voltage driving that current is different, so with regulation a 4.2 battery will last longer than it is suggested by just its mAh rating (check BF for more details)
Edit: P=VI, so the same power (Watts) can be achieved using a lower current with an increased PD.
e.g. 1.5V x 1A = 3Vx0.5A
(if it is confusing then do not worry about it) -
+1 on the nitecore i4, have one myself.
Also, I think dks ment blf (budget light forums) instead of bf (blade forums) ;)
-
Nitecore charger available from here if you wish to order in the UK.
http://www.ledfiretorches.co.uk/sysmax-intellicharge-i4-quad-bay-charger-v2.html
As this charger can do LiOn cells as well, it gives you some flexibility if you ever get lights that use or do benefit from LiOn cells.
-
That charger looks good, thank you.
dks: I'm aware of the difference between power, energy, voltage and current but thanks for the heads up.
a 2000mAh 1.2V cell and a 700mAh 3.7V cell have pretty similar energy capacity.
-
I finally jumped on board with the eneloops. for those with a Costco they have 8aa and 2aaa plus a charger for $20.
-

Typically I'd spend more in getting to any shop selling non 100% mainstream things at a sensible price than I would on any products, so it's almost always cheaper to just get things delivered. Case in point, my nearest Costco is 85 miles away :)
Anyway, thanks for the advice and store recommendation, I have a charger and batteries on the way. If everything's as good as I hope I'll get mum a set too.
-
First impressions are that your advice was spot on. The batteries seem great and the charger is simple to use and it clearly shows what it's doing.
As a test I left my H51 on full, and it stayed on high high power for a long, long time before fairly rapidly dropping out of high entirely and to low-medium. Running it on alkalines it couldn't stay in high high for more than a few minutes and would drop to low high for a bit, then it would drop to high medium for a bit, then low-medium and I'd change the battery. So, torch is better and I don't need to worry about leaving it on one of the high power settings and munching through batteries

Does get a bit warm though :D
-
Glad you like it.

-
another satisfied customer :D
-
I'm not sure I can though!
-
Many AA lights just can't handle the heat generated by 14500's' I ordered a light recently that advertised that it could take AA OR 14500, but when it came in, it absolutely would not work with Any AA. Since I had recently purchased the Fantastic Intellicharger I4 Version2 charger(which will charge just about Anything), I went ahead and ordered a couple of 14500s just for that light, but I normally run Sanyo Eneloops in my AA flashlights, and I have never had a problem.
-
@hammerheel68 said:
Many AA lights just can't handle the heat generated by 14500's' I ordered a light recently that advertised that it could take AA OR 14500, but when it came in, it absolutely would not work with Any AA. Since I had recently purchased the Fantastic Intellicharger I4 Version2 charger(which will charge just about Anything), I went ahead and ordered a couple of 14500s just for that light, but I normally run Sanyo Eneloops in my AA flashlights, and I have never had a problem.+1 for the Intellicharger i4, not only it recharges just about anything, it also seems to do quite a bit better job at recharging my 16850's than my old Lumilight charger... I had recharged one 18650 with the old one only couple days prior getting the i4 and as I put it in the i4, it kept on charging for at least couple hours more

-
The only thing I can knock with the charger is the springy clamps. You have to open them by hand and then drop the battery in because they're too sticky.
The only thing I can knock with the batteries, and this is both a pro and a con and is I think what I wanted, is that when they run out they go very quickly. Yesterday i went out in the dark with my torch working quite happily on all brightness levels. Within 5 minutes it would only manage slightly more than low.
I think I'm going to have to just change the battery every few days so I don't get caught out. -
@Cupboard said:
The only thing I can knock with the batteries, and this is both a pro and a con and is I think what I wanted, is that when they run out they go very quickly. Yesterday i went out in the dark with my torch working quite happily on all brightness levels. Within 5 minutes it would only manage slightly more than low.
I think I'm going to have to just change the battery every few days so I don't get caught out.That is typical of good NiMh rechargebale batteries. They maintain their 1.2V for nearly all their charge, then voltage drops off quickly at the end. It also means it is difficult to accurately measure how much charge remains in a partially used NiMh battery (although Zebralight do offer that function on some of their AA lights).
Many people have two sets of batteries and swap in the fresh set before use so they know they have a full charge ready to go.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
