What tool did you carry today?
-
B.O. Rebar and a Vic rambler
-
Midnight MiniChamp, Zino and PST now. Spirit, Midnight MiniChamp and Zino earlier.
-
@captain spaulding said:
B.O. Rebar and a Vic rambler
The BO Rebar is still on my to buy list.

I think it is on mine as well. I can't think of any other affordable BO tool I could get. I don't really want to get a tool I already have, but I can carry the BO one and have the SS one as my go to home tool (on top of whatever I'd actually be carrying at the time ;)). Too bad they didn't make the Wingman/Sidekick in BO as they'd be fairly cheap too.
On topic: Wingman, Ranger Plus and OHMasterRT today. I'm really digging the Wingman/Ranger combo as I've carried it for the most part the last few weeks. I also really like the OHMRT, and try to fit it into the lineup when I can. Don't really need it, but it's a sweet knife

-
@captain spaulding said:
B.O. Rebar and a Vic rambler
The BO Rebar is still on my to buy list.

I think it is on mine as well. I can't think of any other affordable BO tool I could get. I don't really want to get a tool I already have, but I can carry the BO one and have the SS one as my go to home tool (on top of whatever I'd actually be carrying at the time ;) ). Too bad they didn't make the Wingman/Sidekick in BO as they'd be fairly cheap too.
On topic: Wingman, Ranger Plus and OHMasterRT today. I'm really digging the Wingman/Ranger combo as I've carried it for the most part the last few weeks. I also really like the OHMRT, and try to fit it into the lineup when I can. Don't really need it, but it's a sweet knife

You could always get a black MP600...

-
@captain spaulding said:
B.O. Rebar and a Vic rambler
The BO Rebar is still on my to buy list.

I think it is on mine as well. I can't think of any other affordable BO tool I could get. I don't really want to get a tool I already have, but I can carry the BO one and have the SS one as my go to home tool (on top of whatever I'd actually be carrying at the time ;) ). Too bad they didn't make the Wingman/Sidekick in BO as they'd be fairly cheap too.
On topic: Wingman, Ranger Plus and OHMasterRT today. I'm really digging the Wingman/Ranger combo as I've carried it for the most part the last few weeks. I also really like the OHMRT, and try to fit it into the lineup when I can. Don't really need it, but it's a sweet knife

You could always get a black MP600...

True. I haven't considered trying any Gerbers, but I suppose I shouldn't disregard them either. I like the idea of the OHO pliers, and I assume they're spring loaded? I don't know much about Gerber MTs really, other than reading mixed reviews on here. The same can be said about SOG though, and I was willing to try the PPP, so perhaps I should be willing to give Gerber a shot
. I wouldn't want a heavy duty sized one though, and I'm not sure where the MP600 falls in comparison to the average full size Leatherman MTs in terms of bulk/weight. -
@captain spaulding said:
[quote author=JAfromMn link=topic=10834.msg803333#msg803333 date=1384734053]
B.O. Rebar and a Vic ramblerThe BO Rebar is still on my to buy list.

I think it is on mine as well. I can't think of any other affordable BO tool I could get. I don't really want to get a tool I already have, but I can carry the BO one and have the SS one as my go to home tool (on top of whatever I'd actually be carrying at the time ;) ). Too bad they didn't make the Wingman/Sidekick in BO as they'd be fairly cheap too.
On topic: Wingman, Ranger Plus and OHMasterRT today. I'm really digging the Wingman/Ranger combo as I've carried it for the most part the last few weeks. I also really like the OHMRT, and try to fit it into the lineup when I can. Don't really need it, but it's a sweet knife

You could always get a black MP600...

True. I haven't considered trying any Gerbers, but I suppose I shouldn't disregard them either. I like the idea of the OHO pliers, and I assume they're spring loaded? I don't know much about Gerber MTs really, other than reading mixed reviews on here. The same can be said about SOG though, and I was willing to try the PPP, so perhaps I should be willing to give Gerber a shot
. I wouldn't want a heavy duty sized one though, and I'm not sure where the MP600 falls in comparison to the average full size Leatherman MTs in terms of bulk/weight.
[/quote]They are a bit larger than the Wave/Charge series (if I remember correctly) but not (much) heavier. I don't have one now, to compare, though... Of course, lots of people around can ;)
-
Sidekick and s4


-
[quote author=captain spaulding link=topic=10834.msg803365#msg803365 date=1384741983]
[quote author=JAfromMn link=topic=10834.msg803333#msg803333 date=1384734053]
B.O. Rebar and a Vic ramblerThe BO Rebar is still on my to buy list.

I think it is on mine as well. I can't think of any other affordable BO tool I could get. I don't really want to get a tool I already have, but I can carry the BO one and have the SS one as my go to home tool (on top of whatever I'd actually be carrying at the time ;) ). Too bad they didn't make the Wingman/Sidekick in BO as they'd be fairly cheap too.
On topic: Wingman, Ranger Plus and OHMasterRT today. I'm really digging the Wingman/Ranger combo as I've carried it for the most part the last few weeks. I also really like the OHMRT, and try to fit it into the lineup when I can. Don't really need it, but it's a sweet knife

You could always get a black MP600...

True. I haven't considered trying any Gerbers, but I suppose I shouldn't disregard them either. I like the idea of the OHO pliers, and I assume they're spring loaded? I don't know much about Gerber MTs really, other than reading mixed reviews on here. The same can be said about SOG though, and I was willing to try the PPP, so perhaps I should be willing to give Gerber a shot
. I wouldn't want a heavy duty sized one though, and I'm not sure where the MP600 falls in comparison to the average full size Leatherman MTs in terms of bulk/weight.
[/quote]They are a bit larger than the Wave/Charge series (if I remember correctly) but not (much) heavier. I don't have one now, to compare, though... Of course, lots of people around can ;)
[/quote]Yeah, that's probably too big for what I prefer for carry now. I'm sure there are smaller versions of the Gerber MTs though. I'll have to look into it and see what I find. Is the MP400 smaller? I'm assuming so based on the lower number.
-
[quote author=Monrogue link=topic=10834.msg803530#msg803530 date=1384783118]
[quote author=captain spaulding link=topic=10834.msg803365#msg803365 date=1384741983]
[quote author=JAfromMn link=topic=10834.msg803333#msg803333 date=1384734053]
B.O. Rebar and a Vic ramblerThe BO Rebar is still on my to buy list.

I think it is on mine as well. I can't think of any other affordable BO tool I could get. I don't really want to get a tool I already have, but I can carry the BO one and have the SS one as my go to home tool (on top of whatever I'd actually be carrying at the time ;) ). Too bad they didn't make the Wingman/Sidekick in BO as they'd be fairly cheap too.
On topic: Wingman, Ranger Plus and OHMasterRT today. I'm really digging the Wingman/Ranger combo as I've carried it for the most part the last few weeks. I also really like the OHMRT, and try to fit it into the lineup when I can. Don't really need it, but it's a sweet knife

You could always get a black MP600...

True. I haven't considered trying any Gerbers, but I suppose I shouldn't disregard them either. I like the idea of the OHO pliers, and I assume they're spring loaded? I don't know much about Gerber MTs really, other than reading mixed reviews on here. The same can be said about SOG though, and I was willing to try the PPP, so perhaps I should be willing to give Gerber a shot
. I wouldn't want a heavy duty sized one though, and I'm not sure where the MP600 falls in comparison to the average full size Leatherman MTs in terms of bulk/weight.
[/quote]They are a bit larger than the Wave/Charge series (if I remember correctly) but not (much) heavier. I don't have one now, to compare, though... Of course, lots of people around can ;)
[/quote]Yeah, that's probably too big for what I prefer for carry now. I'm sure there are smaller versions of the Gerber MTs though. I'll have to look into it and see what I find. Is the MP400 smaller? I'm assuming so based on the lower number.
[/quote]Yes, the MP400 is smaller, pretty much Rebar sized, I'd say. I'm not sure if it comes in black, though.
Great scissors on that thing :)
-
[quote author=bmot link=topic=10834.msg803546#msg803546 date=1384784231]
[quote author=Monrogue link=topic=10834.msg803530#msg803530 date=1384783118]
[quote author=captain spaulding link=topic=10834.msg803365#msg803365 date=1384741983]
[quote author=JAfromMn link=topic=10834.msg803333#msg803333 date=1384734053]
B.O. Rebar and a Vic ramblerThe BO Rebar is still on my to buy list.

I think it is on mine as well. I can't think of any other affordable BO tool I could get. I don't really want to get a tool I already have, but I can carry the BO one and have the SS one as my go to home tool (on top of whatever I'd actually be carrying at the time ;) ). Too bad they didn't make the Wingman/Sidekick in BO as they'd be fairly cheap too.
On topic: Wingman, Ranger Plus and OHMasterRT today. I'm really digging the Wingman/Ranger combo as I've carried it for the most part the last few weeks. I also really like the OHMRT, and try to fit it into the lineup when I can. Don't really need it, but it's a sweet knife

You could always get a black MP600...

True. I haven't considered trying any Gerbers, but I suppose I shouldn't disregard them either. I like the idea of the OHO pliers, and I assume they're spring loaded? I don't know much about Gerber MTs really, other than reading mixed reviews on here. The same can be said about SOG though, and I was willing to try the PPP, so perhaps I should be willing to give Gerber a shot
. I wouldn't want a heavy duty sized one though, and I'm not sure where the MP600 falls in comparison to the average full size Leatherman MTs in terms of bulk/weight.
[/quote]They are a bit larger than the Wave/Charge series (if I remember correctly) but not (much) heavier. I don't have one now, to compare, though... Of course, lots of people around can ;)
[/quote]Yeah, that's probably too big for what I prefer for carry now. I'm sure there are smaller versions of the Gerber MTs though. I'll have to look into it and see what I find. Is the MP400 smaller? I'm assuming so based on the lower number.
[/quote]Yes, the MP400 is smaller, pretty much Rebar sized, I'd say. I'm not sure if it comes in black, though.
Great scissors on that thing :)
[/quote]I saw it in black on Amazon a few minutes ago. I may consider one, but I'm not sure. OHO pliers would be fun to play with, but I can't say I'd really need them that badly. Still, they would be fun, especially if they're also spring loaded.
-
The MP400 and 600 are not spring loaded pliers. They are great tools though, highly recommended by me and others here on the forum.
I'm actually carrying my MP400 Compact Sport today. -
@jerseydevil said:
The MP400 and 600 are not spring loaded pliers. They are great tools though, highly recommended by me and others here on the forum.
I'm actually carrying my MP400 Compact Sport today.Oh ok, thanks for the info JD
I knew you were one of the major Gerber supporters here. How do you rate them in comparison to LM MTs? -
The MP400 and 600 are not spring loaded pliers. They are great tools though, highly recommended by me and others here on the forum.
I'm actually carrying my MP400 Compact Sport today.Oh ok, thanks for the info JD
I knew you were one of the major Gerber supporters here. How do you rate them in comparison to LM MTs?Very highly IMO, I'd happily put them on a par with the Rebar (if not a little higher ;)). In fact I'm carrying my modified MP400 as we speak. If you're not a scissors person you can also look at the MP450 which replaces them with a file.
-
The MP400 and 600 are not spring loaded pliers. They are great tools though, highly recommended by me and others here on the forum.
I'm actually carrying my MP400 Compact Sport today.Oh ok, thanks for the info JD
I knew you were one of the major Gerber supporters here. How do you rate them in comparison to LM MTs?Very highly IMO, I'd happily put them on a par with the Rebar (if not a little higher ;)). In fact I'm carrying my modified MP400 as we speak. If you're not a scissors person you can also look at the MP450 which replaces them with a file.
Thanks for your thoughts Gareth
One of the primary issues that seems to stick out in my mind from what I've read here, is that the inner tools aren't the greatest quality in comparison to others. They also look like they'd be a bother to get out based on how far the handles open (I'm only basing that on pics though). -
Again, I would say they are no more, and perhaps even less, bother to deploy than any internal Leatherman tool. I would also say they are of the same quality as the ones found on the Rebar. The only legitimate criticism I would agree with is the fact that the tools are shorter than a lot of Leatherman's.
-
@Gareth said:
Again, I would say they are no more, and perhaps even less, bother to deploy than any internal Leatherman tool. I would also say they are of the same quality as the ones found on the Rebar. The only legitimate criticism I would agree with is the fact that the tools are shorter than a lot of Leatherman's.Cool, thanks a bunch man

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
