Knife design
-
Great project you have going. I like the design so far

-
Almost there :)

I have one more slight angle to grind on the back near the handle. Then time for the bevel. It's looking better that I thought it ever would :).
-
How thick is it? And how do you plan to grind it?
-
@tattoosteve99 said:
Need a little help on this folks. What's the easiest way to grind the bevel? I'm having a tough time deciding how to grind?Sent from my iPhone using Tapatalk
Bench grinder for the major stock removal, belt grinder on its side for the semi finish and a high grit belt for the final?
-
I've used a belt sander in the past

-
-
@tattoosteve99 said:
I only have a one inch sander. I might try to make a jig of some sort.Sent from my iPhone using Tapatalk
I made some out of wood for mine, I will take a picture tonight

-
I only have a one inch sander. I might try to make a jig of some sort.
Sent from my iPhone using Tapatalk
I made some out of wood for mine, I will take a picture tonight

I made a couple of these Steve, Its a crude 'jig' but its fine for making the odd blade
I don't know if you can tell from the picture but the wood is cut at less than a right angle and the back of the blade rests on the cut off nails
-
I only have a one inch sander. I might try to make a jig of some sort.
Sent from my iPhone using Tapatalk
I made some out of wood for mine, I will take a picture tonight

I made a couple of these Steve, Its a crude 'jig' but its fine for making the odd blade
I don't know if you can tell from the picture but the wood is cut at less than a right angle and the back of the blade rests on the cut off nails
Thanks. That does help. I'll also have to make my sander bench bigger too as it's only about an inch long.
Sent from my iPhone using Tapatalk
-
You could use screw instead of nails, it allows for different angles while sanding. Adjust the screw to have it stand out more or less, depending on what angle you want.
-
I like how she's coming along Steve. >:D
don't thin the edge. Flatten out the back.
you may lose some of the edge when you're trying to get the grind right.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Looking back I think I started mine off on a bench grinder
