Acid Electrician
-
How did you use the juice? Pushed the blade in the lemon? Or you had bought juice?
-
Boiled the SAK in lemon juice (pure, what happened to have around; diluted with water works too) with a bit of salt added. Boliling like this after a while the small tools (can opener and awl) and springs become black. After a little longer the blades start darkening as well. The end result is that all steel pieces (including the middle rivet on this vintage SAK and the sides of the back springs) end being covered in an oily black layer. Some of that oily black layer washes out with water and what remains is the flat dark grey finish that can be removed only by sanding and polishing.
It is not perfect. The "etching" does not happen everywhere at the same time and depending on the boiling time, the bath concentraton and the SAK position the gray finish may end up not uniformly applied (some parts may remain shiny, some slightly darker than others). Also the boiling salty acid solution may attack the scales as well (although initially whaht it does is clean throughly and remove aluminium oxidation). So, please do not try this on any SAK that you do not want to see destroyed.
-
@ICanFixThat said:
Looks REALLY similar to the grey blades that Wenger produced on a few models like the Alpine Blackpacker and their camo highlander.I think we can call their grey tools acid etch?
Interesting indeed. Correct, it looks similar to what is shown for the camo Alpine Backpaker:
<img src="http://www.sakwiki.com/show_image.php?id=469" />
Did that have also the backsprings grayed out? Or just the blades, tools and the lock?
Anyway, it is possible Wenger did a similar treatment, just properly in a factory setting (no wasting good lemon juice either I imagine) :D
-
A few more pics. Note the constrast between the worn out scales and the perfect shape heavy tools. This SAK was a strange one to begin with, with outside wear but unused otherwise.
-
OK, so who is bold and daring enough to do this to a Spirit and see if it cures the slipperiness? :ahhh :ahhh :D
-
@gustophersmob said:
OK, so who is bold and daring enough to do this to a Spirit and see if it cures the slipperiness? :ahhh :ahhh :DThat's a very interesting idea.
-
^+1
I'd like to see a gray Spirit -
@gustophersmob said:
OK, so who is bold and daring enough to do this to a Spirit and see if it cures the slipperiness? :ahhh :ahhh :DSorry, I do not have one myself to try ::) If anyone is interested, feel free to PM me before starting to give some additional advice and avoid some possible mistakes that I did during my first time experiment.
-
Thats pretty interesting, it kinda looks like it was stone washed, but VERY softly! just about sand blasted.. but very interesting!! I likes
JR -
Thread Necro!
I was curious about the deatils of this - Did anyone try this out or develop it any further?
I guess the Electrician went in in one piece, didn´t it?I need to have a look under teh sink to see if we have soem lemon acid /(which we use to descale teh kettle) and have a go with some loose Vic tools and note the time / temp / concentration.
-
I love the idea of using lemon rather the ferric acid mix I have been using. I will have to give this a go.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
