Show off your Sak mod's!
-
Nice drilling and peening! :)
-

Pioneer with clip and scissors. My fiirst clip install.
-
Can we stop showing off etched and stonewashed blades? I found myself looking for tumblers and acids...

-
Reminds me of the Woodstock Documentary "Don´t take the brown acid! It´s bad for you! Peace!"
;)While we´re at derailing threads, anybody else liked Batmans Tumbler?
-
@jrp, whats the best method for peening Alox???
Really want to make an 84mm Voyageur... In like every color.
-
The essential part of peening alox is getting your pin head length correct. Too much and the heads won't look right, plus it could be peened in before the head forms all the way. Too little and there won't be enough to form a proper rivet. A good rule of thumb is for the pin head to be about half the diameter of the pin stock that you're using. A way I've found to work I'd to use a liner and flush cutters to get consistent lengths.
The second is patience. Don't get in a hurry. It takes quite a few (hundreds sometimes) hammer hits to get it peened in right. Start with a few center hits, then work around the pin to gradually form the head. Work both sides evenly until the side play is gone. It may take a knife or two to dial your technique in, but you'll catch on with it.
-
Went to war with this old cross today. It misbehaved but I smacked it back in line.
End result.



As a side note, I've never publicly thanked anyone for helping me thru the learnjng process but one look at this sak ahoold be more than enough to name that person. Along with Mr Syph, Tattoosteve and PTRsak. You have all been very inspirational and I thank all of ypu for the generous help.
-
I've been a Drifter kind of guy tonight. Driftin' up and down them railroad tracks, when I came upon a pretty vision of green...


-
There was something beyond the green that I just had to see, but I couldn't...so I pulled out my new EDC to see it:


You might recognize this one from sometime ago when I first made it. It was formerly a Midnight Manager, but when I finished the mod above and thought about the name, I just had to do it. I took the knife apart once again, added the emergency blade and SD ruler, swapped out the SD nail file for the cleaner tip.
So now, I have the Midnight Drifter...and that has to be the coolest sounding name for a knife that I've ever heard.
-
@rickinFL said:
Went to war with this old cross today. It misbehaved but I smacked it back in line.End result.
As a side note, I've never publicly thanked anyone for helping me thru the learnjng process but one look at this sak ahoold be more than enough to name that person. Along with Mr Syph, Tattoosteve and PTRsak. You have all been very inspirational and I thank all of ypu for the generous help.
I wonder why you never sink the center screw like the ones on the sides.

-
Went to war with this old cross today. It misbehaved but I smacked it back in line.
End result.
As a side note, I've never publicly thanked anyone for helping me thru the learnjng process but one look at this sak ahoold be more than enough to name that person. Along with Mr Syph, Tattoosteve and PTRsak. You have all been very inspirational and I thank all of ypu for the generous help.
I wonder why you never sink the center screw like the ones on the sides.


Wasn't quite "finished".
-
This blade looks at home dressed in old clothing.


-
Sweet blade Rick. That looks nice

-
Sweet...
What did u use to paint the tweezers?
Sent from my GT-S5830i using Tapatalk 2
-
-
Yes.
Working with someone to mill me an insert for 2 tritium vials. These will glow on their own.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



