Beer Can Stove.
-
@captain spaulding said:
Forgot to ask you guys. That is a SAK without the scales I see right?I'm sure it is. :)
-
Nice simple design that one, I'll need to give it a go.

-
Found a can and washed it out. Now I just need to find some "fuel."
I wonder what would happen if you did not make that tiny little hole.

-
Just made one real quick. Figured I posted the link so I might as well make one. :D
I started by cutting the top off and as you can see I started it in the groove and moved the cut to the upper area trying to make it as clean as possible. I found it quite hard to cut all the way around the can (safely), but it will work. A can opener might be great for this. I will have to try that on another can.

I finally got all the way around. Took me about 5 minutes.

I cut the can in half and used the scissors to make everything clean and make everything the correct size.
*NOTE: With my scissors the easiest way to cut around the can was to hold the can in my left hand and the scissors in my right. I tried the other way and it was nearly impossible to get a clean cut.
I used the knife blade to make the little "combustion chambers." I had to go back and do it over again. My first attempt seemed to not leave enough room when the top was inserted into the bottom. Take your time on these. Don't forget to also make your tiny hole.


here's a shot of the inside.

Not sure if I should leave it like this or push it in a bit more. I guess experience making these will answer that question.

And the finished product. Now I need to see if I have any fuel for this bad boy. I have no idea if mine will work though.

*NOTE: One last thing. If you use a SAK for this it WILL scratch your blade to hell. Use a beater SAK or a different knife.
-
nicely done, Cap!
thanks for the detailed pics. -
Very nice
, now we want to see something BURN... ehh... cook. -
Well I just gave this one a go as well. Scissors, a Stanley knife and a longer blade to make the scalloped edges in the top half. Stuck to the instructions just like the Captain, though I think I have gone with a smaller hole and indentations. As the Cap says: time will tell if this is right or not. :)



-
Looks pretty good to me. Let us know if you spark that thing up.

-
I have made a couple of alcohol stoves from Lynx deodorant cans. (branded Axe in some counties)
They weigh a few grams more than a beer/sofa cans but much stronger.
They work really well. 30ml of meths will boil a cup of water for coffee/tea.I'll try and find a link to the tutorial.
-
I done one of those before, works pretty good. I still like the penny stoves and wood gas stoves better.
sent from Nate's mobile
-
That's a neat one there. I gonna have to thy that one.
sent from Nate's mobile
-
-
WE NEED FIRE CHAPS !!!!
-
@Taxi Dad said:
WE NEED FIRE CHAPS !!!!I'M AT WORK!!! :D I'll try and have a play in my garden tonight.
Oh, and for those who haven't seen Tony's deoderant can burners: http://forum.multitool.org/the-mod-squad/a-n-other-stove/msg520211/

-
@captain spaulding said:
I wonder what would happen if you did not make that tiny little hole.

I think the fire would probably die, I suspect it's for getting oxygen into the can, as the big opening would be closed by a pan/pot that's standing on the stove. Does that make sense?

I don't think the hole is for oxygen. Alcohol vapours burn outside the stove not insade. I think it is there to prevent buildup of pressure wich would force the alcohol out of the ''fuel dents''. That way you avoid having a fire breathing monstrosity on your hands. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login