From getting down to getting dirty.
-
Syph custom and Soldier/SI. Dem suckas get nasty.
-
I use my CT34 20 times a day at work. If it isn't making calibration stickers smaller with the scissors, it is opening boxes, or the pliers are used to pull off the old stickers. We use industrial strength glue on our stickers the the pliers work perfect on.
-
My Deluxe Tinker gets used almost daily; sometimes really messy in dirt, grease, etc.
Just clean it up and it keeps on ticking.Just curious, does anyone know to what hardness RC that Vic makes its blades?
While obviously usable sharp, not really thick or hard enough for me for really
shaving sharp. I normally carry two knives; my Deluxe Tinker is my tool kit and
a CRKT M4 Wood or Kershaw Crown for a general working knife.Rich
-
I have an Alox Electrician that works for a living. I'm currently a hydraulic and industrial hose technician and the 'lecky gets just as filthy as I do on some jobs.
Meanwhile its cousin, a 111mm Alpineer lives in my lunch bag and the nastiest thing it cuts is the occasional piece of fruit.
-
I suppose I could say the short answer is the one I have with me, but that isn't entirely honest.
I'm sure we all have favourites in our collection and some tools that we baby more than others. I've carried my alox soldier more than most of my SAKs and it has punched above its weight on a few occasions.The large screwdriver gets used for prying all the time. I remember last year using it to help out a friend with some DIY. I'd gone round to meet him at his house before we went for a walk on the moors and then on to the pub afterwards. He was in the middle of pulling up the old carpet gripper rods because he was getting laminate floor put down the next day. He was pulling it up with a claw hammer but the rods were glued and pinned to the floorboards so he was having some difficulty getting the claw under the rods to start prying. I pulled out the soldier, and with its thinner pry bar we had the job finished in no time. Was it abuse of the tool? Maybe a little, but it was up to the job. It has some scratches to show for it but I think they add character, and make me love it all the more. It is one tough little tool.
However I must confess that I have another soldier still in its box at home and that is always at the back of my mind.I'm less uptight in general about using all my SAKs now that I'm reasonably competent at sharpening the blades and also maintaining all the tools by cleaning and lubricating. I know that even if I get them messy I can soon have them back to a sharp, gleaming state with plenty of snap.
-
Well all of them pretty much. But I guess that needs an explanation.
Hunter and Farmer are in the same rotation when a nicer knife (non one hand opening) is the order of the day and I need a few tools. So they get to see some nasty stuff from time to time.
Weekender (or what ever it is) has seen the work even a bit too much so now it's retired. After all it was already given to me in a bad shape to start with.
Recruit was found under some horse dung. That dirty enough?
Spirit X... well I actually carry this one a bit too often but it's the go to tool anyway since if it can't do it then I really need a more serious tool from the toolbox
-
yes i cleaned it. and lucky enough it was old dung
-
Every single one of my SAKs gets used except 2. The Automobile and the Champ XLT. The most dirty, a Swisschamp. It's almost always with me and has been dropped in the mud countless times.
Sent from my SAMSUNG-SM-N900A using Tapatalk
-
If I know there's going to be a dirty job, I reach for my Centurion at work or my Electrician Plus at home.
-
My Tinker. It's the only one I own at the moment, and is abused daily.
-
@afi1 said:
My Tinker. It's the only one I own at the moment, and is abused daily.My Tinker has been a trusted and well-used companion for many years, and still sees regular pocket time.
Lately it's been my Swisschamp, but there are 6 or 7 SAKs that see regular pocket time depending on what I feel like grabbing as I go out the door. They all get used without worrying if they might get dirty or scuffed or whatever. They're tools, and they're meant to be used. My poor Executive hasn't left my keys in years, banged up and very pocket-worn. But it's the closest thing I have to a TRUE EDC, and if I need it, I know it's ready for action, no matter how it looks. 
-
Honestly, nothing of mine really gets dirty through use. My job does not require that sort of usage, at least not normally. The dirtiest mine get are from pocket lint ::)
-
Probably any of my edc saks. Older Explorer, Climber, Cadet, Pioneer...
I most often rotate a Farmer, Cadet, or Spartan these days. I've been thinking about picking up the climber again more recently as well.
@Thunderpants said:
I have some silly expensive Black Ice knives - a Trailmaster and a Spartan - but they are just waiting to be ebayed. Not touching them. Not even daring to look at them. They are priceless. (Ridiculous, overpriced tat, really, but some people like them...)I picked up two of the black ice Spartans at an outlet that was selling them for $80 dollars shipped each. I bought them for the same reason as you, but after checking one out, I've decided to keep one if not both. I didn't think I would care for them, but I'm really digging the black ice on the blades, the orange toothpick, and the black liners. In person, the camo doesn't look half as cheesy as I thought it would. Since I decided to definitely keep one, it has been hanging in my pocket from my key chain fob ever since.
Now I wish I had a third or fourth! I don't want to pay the $120-$130 retail price, so that won't happen. It would still be cool to send a couple out to syph007 for 91mm alox modifications (which I plan on doing with at least one of mine), keep one mint and collectible, keep one for a scale swap, and another to use as is. The price tag makes the black ice Vics not an option for most people (including myself), but I still feel pretty damn lucky for getting mine at the price I paid.
I'm also curious to see how the wear on the black ice spartan tools will compare to the wear on the black oxide Vics that are currently in transit to me now. If the black ice finish can resist wear and tear better than the black oxide tools, then that might be something to consider when it comes to these limited and more pricey Vics.
-
Using a SAK will do stuff to it - like make it look like a useful tool instead of an ornament!
Cutting open the tape on boxes leaves gum on the blade, but a tissue with some Isopropyl Alcohol will clean that up easily.
Cutting paper or cardboard will dull the blade, but SAK blades sharpen really easily.
A few dents & scratches in the Celidor - character marks! -
What I use hardest, isn't what I use the most. My daily carry Sak's get used, but with electronic scales they aren't getting dropped in the mud...Not if I can help it.
My go to SAK for dirty hands and bloody knuckles is my Master Craftsman. It's helped change my distributor cap&rotor, radiator hoses, helps with my SAK modding (it's my lovely assistant), plus it accompanies me jogging in the woods and out when I know physical/heavy labor are ahead of me.
Most used is my 58mm mod, (haven't named it yet) pretty much a Vagabond with the E-blade replaced with ruler/SD. Going to call it the Professor or Educator or the Principle or something like that...
-
The Vic Ranger I use around the house has seen plenty of action. I've had to thourougly clean it three times already in less than a year. I've used every implement on it several times, apart from the small chisel that has not yet been put to use. One day.
When away from home, it's usually the Vic Pioneer's turn to get the job done, although I've also used my Vic Handyman occasionally. Pocket knives are often frowned upon in Greece so I generally refrain from pulling out my EDC unless it is something urgent.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

