Sharpening scissors
-
- 1 on that way with the Sharpmaker

- 1 on that way with the Sharpmaker
-
@TSabatine said:
Any advice? Tips tricks?FWIW, here are my $0.02:
-
try to maintain a consistent angle
-
sharpen the entire length of the edge
-
sharpen both scissors blades
-
only sharpen the "outside" of each blade, never the "inside"
-
-
I should have explained it more clearly in my earlier post. When scissors are in the closed position, each scissor blade has one side that faces the opposing scissor blade and one side that does not. I was referring to the side of each scissor blade that faces the opposing scissor blade as the "inside", and the side that does not as the "outside".

-
From my experience you don't sharpen Victorinox's scissors. You either take them to a steel and/or a simple stropping. With only a stropping my scissors can go from gnawing on 550 cord to cleanly shearing threw it. Now; if even after that they still aren't cutting than it's the joint...which is why I prefer the scissors with screw joint.
-
@Fattsgalore said:
Now; if even after that they still aren't cutting than it's the joint...which is why I prefer the scissors with screw joint.Could you elaborate on that a bit?
Sent from my iPhone using Tapatalk
-
Newer model scissors are joined by a rivet. Some are brass (I like those) some are either nickel or steel. (not sure) Older models are joined by a screw; which is replaceable. I'll take a pic in a few showing the three different joints.
-

L to R: Screw, brass, steel or nickel.All scissors joints will eventually get lose, ALL SCISSORS. Some last a long time, most don't these days since everything is cheap China BS.
I do have one old (over 30 years old) pair of scissors all steel Made in USA, they are tight and cut like new. (they don't make'em like they use too)Anyway, once scissors head's get lose you'll start having material fold in between the two blades instead of being sheared. No amount of sharping will fix lose scissors heads.
When either of the newer scissors joints get lose they will need to be replaced, when an older type gets lose you just replace the screw.
I'd rather replace a screw than replace a pair of scissors.I'm serious about scissors, definitely my favorite Victorinox tool. My best pair is the set on my Master Craftsman (with screw), like 30 years old or something and cuts like new.
-
The awl yes.
sent from Nate's mobile
-
If the can opener is blunt you are eating too many beans.
-
I usually sharpen up an awl on a new SAK. I use the medium stone of a Sharpmaker, laid flat. I do a few passes to true up the edge, and then make the point a bit sharper and pointier.
-
@Thunderpants said:
If the can opener is blunt you are eating too many beans.Blazing Saddles --Farting Cowboys- Greatest Fart Scene of All Time
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login