1 Year Rust Review: Leatherman Kick
-
Really interesting stuff Spoonrobot. The only problem I have had with my new model LMs rusting is in the space on the phillips driver just like yours in this pic.

Maybe it collects moisture and gunk. -
That area was one of the few expected areas for rust that actually rusted. To be fair some of the corrosion is from red wine that was in the area for a few days before I remembered to rinse it out. I think it's a worth while trade though over the old form. I find the new philips to be much stouter and easier to access than the old one.
-
Great review as always your very in depth. Great to know that they hold up well in wet environment. Also LM123 thanks for the baking powder, vinegar tip :D
-
I'm pleasantly surprised to see no rust on the file blade. Some of the old PST's and SuperTools I've seen have rust in the file teeth. Something about the harder grade of steel they use for the file? Anyhow, it doesn't appear to be an issue on the Kick. :)
-
Great review and picture's mate, considering the enviroment it works in, it's really not as bad as I'd off expected :)
-
Very nice review and show, ty. I have had similar results on my Kick and any problem area's cleaned up easily.
You take care of your tools so any/most corrosion problems will be few and far in between.
-
Thanks for the review & pic's,and I still like the way you mod'd the Kick!!!
-
Awesome review and photos!
Why do I have the urge to dismantle my tools now. :)
-
nice review, the concotion sounds like a good idea.
-

I have some theories about the lack of rust on the outside handles. I was fully expecting to see a lot of surface rust but I think that because it was washed and cleaned so much most of the corrosive sweat and chemicals that tend to build up on tools as they are carried and used was removed before it could interact with the metal.
Please report back. The loose clip is one of those things that hasn't ever affected me functionally but it is annoying to interact with. Things on multis should be pleasantly tight, not wibbly/wobbly.
-
[quote author=Spoonrobot link=topic=4907.msg81309#msg81309 date=1211483325]

I have some theories about the lack of rust on the outside handles. I was fully expecting to see a lot of surface rust but I think that because it was washed and cleaned so much most of the corrosive sweat and chemicals that tend to build up on tools as they are carried and used was removed before it could interact with the metal.
Please report back. The loose clip is one of those things that hasn't ever affected me functionally but it is annoying to interact with. Things on multis should be pleasantly tight, not wibbly/wobbly.
this has always bothered me.
-
Great thread guys!
Thanks spoon for the write-up and pics, very informative. Thanks for the rust-removal tip LM123. And great job with the clip DaveK! (I also liked the captions)
I used my kick (clipped in my pocket) for construction work for about a year and gave it very little care, and it had only a couple of small spots every once in a while. Right now it's being sheath-carried for farm work and it's holding up well. :)
-
Great pics Spoon. :)
I think the Kick did pretty well. :)
-
I just think it is neato that you can swap the broader range of Blast tools into the smaller Kick frame.
Take that Sog.
Still, no reamer eh.
-
Interestingly enough the SOG tools will fit in the Leatherman frames. In stock form the SOG implements will partially engage either the locking tab or the flatspring tab with a 5-10 degree deviation from true when open. It appears to me that with a small amount of material removal from the tang of the SOG implements they will work fairly well. Or at least the Saw/File/Blades; since using a drivers with that degree of deviation is not going to work very well.
I'm still messing around with the implements but I'll have a thread about it when I get some time. I've got Bear parts and Gerber parts to try too. :)
-
I do know that Bear Jaw parts and older LMs can be interchangable :) I took a diamond file from a PST II and put it in my Toolzall (Super Bear Jaws) Maintenance Pro and put it's file in the PST II so not to have the gap
If the Blast Kick series tools are anything like the older LM tools then it should all work

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login