Waiter Alox
-
you probably already know this, but if you do shorten a screw make sure you slip a nut on it first, makes life a lot easier later.
-
@crackout said:
A 2.2 pin with M2 threading sounds a bit flimsy for my taste.Quite right too! All went well on Sunday afternoon except making up a bloody pivot. The 2.5mm one I made for the corskcrew is fine but you are right a 2.2mm with an M2 thread isn't.
I reckon I have 2 options:
- drill the tools to 2.5mm holes
- buy a Wenger Classic 63 and use the tools from that
Now, I prefer the combo tool on the Wenger's anyway so buying one would actually not be that much of a bind as was toying with the idea anyway. However, will the combo tool, spring and blade fit in the Vic Alox body?
BW,
Mike -
If you have a good bit and drill press, drilling all the holes out to 2.5mm is a fast process. I drill out a SAKs worth of parts and have them ready to go in probably 15-20 minutes. Drill holes with carbide bit, debur, polish inside and make sure they move freely on pivot.
-
Thanks Syph,
The parts shouldn't be a problem (it is only 3 holes) - any tips on the washer and keyring spacer - I can see them being a PITA to hold in the vice?
Peso
-
The parts shouldn't be a problem (it is only 3 holes) - any tips on the washer and keyring spacer - I can see them being a PITA to hold in the vice?
Peso
I make new washers, but to drill the existing one ya I can see it would be tough to hold. The kerying spacer I just made an impression of it in wood and hold it tight in that and drill.
-
It's finished. Pics in the morning.
-
So, here we go. Happy with the result. Nice and 'snappy' once played around with the torque of the screws. Not scratched although this was very much an exercise in function over style. Apologies for pic quality, can't find the macro camera.
<a href="http://s173.photobucket.com/user/mikeclem_photos/media/IMG_20131215_115024.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i173.photobucket.com/albums/w56/mikeclem_photos/IMG_20131215_115024.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Now the backside. Corskcrew cut out not quite perfect (the curve is wrong) but see above:
<a href="http://s173.photobucket.com/user/mikeclem_photos/media/IMG_20131215_115140.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i173.photobucket.com/albums/w56/mikeclem_photos/IMG_20131215_115140.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Countersunk the rear corkscrew screw a little too far but this is the only real thing I think could have been done better:
<a href="http://s173.photobucket.com/user/mikeclem_photos/media/IMG_20131215_115148.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i173.photobucket.com/albums/w56/mikeclem_photos/IMG_20131215_115148.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>The floating '4th pin':
<a href="http://s173.photobucket.com/user/mikeclem_photos/media/IMG_20131215_115311.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i173.photobucket.com/albums/w56/mikeclem_photos/IMG_20131215_115311.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>And finally, proudly part of my keychaing EDC:
<a href="http://s173.photobucket.com/user/mikeclem_photos/media/IMG_20131215_115414.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i173.photobucket.com/albums/w56/mikeclem_photos/IMG_20131215_115414.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Nice work! -
very keen!
-
very well done congratulations!
-
Many thanks - esp. Syph - very useful hints and tips made the process far simpler.
Do any of you threadlock the screws? Playing around today I've noticed they are coming a bit loose. I've no intention of taking it apart again except maybe for maintenance.
-
VERY nicely done.
I think it's one of the best ones I've seen so far. 
-
I'm no modder, but I can tell you that yes, you need to use thread locker.

-
yes for sure I use the red threadlocker
-
Found this quite some time ago on threadlockers and bookmarked it. Might be of some use.
Here's the order of strength:
Locktite 220 Low Strength/Wicking, Color blue
Locktite 222MS Low Strength, Color Purple
Locktite 242 Medium Strength (removable), Color Blue (this is the one found in most stores)
Locktite 248 Stick Med. Strength (removable), Color Blue
Locktite 262 High Strength, Color Red (also in most stores)
Locktite 268 Stick High Strength, Color Red
Locktite 290 Wicking, Color Green
SOURCE: http://www.knifenetwork.com/forum/showpost.php?p=178841&postcount=7
-
I like this.
Should come standard from the factory. :D -
Should be more than happy, should be proud!
Didn't think you could do it and have it look so wel!

-
OK, so my nuts are locked, because let's face it, we all need tight nuts :) And yes, I know they are screws before anyone points it out.....
Thanks for all your kind words, quite a fun little project. I can't see myself doing any more (no need) but I'll certainly drop by from time to time. During this task I picked up a few good UK suppliers and metric measurement tips, and happy to share if anyone would like to PM me.
Cheers
-
Wouldn't M2 at 2.2 be rather thin if in brass?
-
Ya for the small 2.2 mm size, it almost seems worthwhile exploring just making custom nuts and threading the 2.2 rod itself. It would work I think...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login