Any love for Wenger?
-
Poor Canoe. :'( Looks like someone took a bite at it.
Nice find though. :D
Fill the bite marks with clear epoxy, wait overnight for it to set hard, then flatten with wet and dry, finally polish smooth, and you'll hardly see the marks. I do this all the time with chips on knives I find and rejuvenate.
Thanks for the suggestion, I'll try to see if I'll be able to fix the marks.
The above "Canoe" is a classic example of a "must buy", in any given condition.
However, I'm quite happy as the knife seems used very little, and all the tools are almost in mint condition.I always use lots of water with the wet and dry paper. Water really helps the removed material "disappear" rather than get ground back in to the scale surface.
With care, a mirror polish can be achieved. -
I think I found the reason about the Basic line we had been discussing.
http://www.e-webtechnologies.com/sak/html/wenger.html
Have a look at the document in the middle of the page titled "Older Wenger Flyer"

I never saw the catalog numbers used there.
After a bit of searching I found this australian website
http://www.eliteofficesupplies.com.au/catalog2004/
with matching numbers.
My guess is that the Flyer above was used years back for the wiki.
That's the reason why either myself nor Karl could find any reference to those names.
Note also that the Classic line does not match with the Wenger's catalogs. -
Interesting find!

I once came across an Australia ad for some Vics. Every name was different. For instance an economy Camper was a Picknicker. Guess that's how advertising people justify their pay. :D
-
I love also old Wengers !
Before 1908, Wenger company name was "Coutellerie Suisse" with a 3 faces stamp on the tang of the blade...
And I found one (Carbon steel blades)...
On the 1908 "Wenger & Co" catalog this is a "model 505". I guess it dates between 1895 (new 3 faces stamp of "Coutellerie Suisse") and 1919 (begining of stainless steel).
It seems that Wenger has used this stamp on few knives until 1942.Before restoration :

After a very important restoration :


Beautifull isn't it ?
Its a beauty for sure, love the tang stamp Wenger used during this period

Next time I will show you a Wenger Tahara 1920's with cross shield (red and yellow-white) on scales and the 3 faces stamp on blade when its restoration will be finished !
As promised, probably a "model 509 +" if I compare with photos from 1910's catalog...


Some interesting old knives!

-
@basilio said:
I think I found the reason about the Basic line we had been discussing.
http://www.e-webtechnologies.com/sak/html/wenger.html
Have a look at the document in the middle of the page titled "Older Wenger Flyer"

I never saw the catalog numbers used there.
After a bit of searching I found this australian website
http://www.eliteofficesupplies.com.au/catalog2004/
with matching numbers.
My guess is that the Flyer above was used years back for the wiki.
That's the reason why either myself nor Karl could find any reference to those names.
Note also that the Classic line does not match with the Wenger's catalogs.So I was correct in the assumption that the name came from counting the tools on the SAKs. Anyone know where James got that flyer from, Australia maybe? Never seen such numbers before. Possibly the AU distributor used their own names and numbers.

-
@enki_ck said:
So I was correct in the assumption that the name came from counting the tools on the SAKs. Anyone know where James got that flyer from, Australia maybe? Never seen such numbers before. Possibly the AU distributor used their own names and numbers.
Yes Nikola, you were very correct.
Since it seems these names and catalog numbers were used only for a specific market, I don't see the reason to edit the wiki, as I already kept the odd Basic names in the knives descriptions.
Not sure about the Classic line. -
Lucky to find a NIB Teton recently retail for an old price. I like this SAK configuration and this Wenger's variant is almost perfection:
-
Couple more of the same Teton. What a nice little SAK.
-
-
@GigaHz said:
Any model name on this? Is this from the 50's or 60's? A Wenger Delmont that snaps like a 91mm Victorinox.


I suppose it's a model 712...
see : http://www.sakwiki.com/tiki-browse_gallery.php?galleryId=98
-
Snagged myself a Blackout 63. To my mind this series is much more attractive than the Victorinox black ice range. I love the stealth toothpick. 8)




-
Has anybody an idea about the number of this knife? Some old Wenger catalogs etc.?
It's about 97mm long (closed)
-
@victor7000 said:
Has anybody an idea about the number of this knife? Some old Wenger catalogs etc.?
It's about 97mm long (closed)
I don't have any info on it, so its obviously a fake. You can send it to me for proper disposal.

-
@victor7000 said:
Has anybody an idea about the number of this knife? Some old Wenger catalogs etc.?
It's about 97mm long (closed)
I'm sorry, I have no information on this knife but I think it's an old one (1916's to 1919's?) because of the bail and the stamp...
I have 2 knives very similar with carbon steel blades and Tenite handle, probably from the 1950s based on the stamp, but no more information about them...


-
Probably a 507 model (1916-1919), carbon steel blade, like new !

-
-
That BSA is nice!

I've got my eye on a few Wenger SAKs now. Won't be long before I pull the trigger on my first. I've never actually owned a wenger in all my years of owning various Voctorinox SAKs ever since the late 70s. I really like idea of getting an 84mm model like their Traveler.
Didn't I buy SI's off of you? O.o
You sure did! I guess I did own those two Wenger SIs for about a week before I sold them to you. They lived in their boxes for that week.
I can't remember ever owning one of their celidor models, although I'm sure there is a chance that I might have as a kid and did not realize it was Wenger. I always assumed Wenger was the 'cheaper' version of Victorinox when I was a kid. I'm now thinking about picking up a few different models mostly because of this thread.
I suppose I should have said I have never used (or remember using) a Wenger SAK.
-
Well, Alexei (+B Canada) still has some Wenger SI's for a fairly decent price. :)
-
@jcfiguet said:
[quote author=victor7000 link=topic=32456.msg817513#msg817513 date=1387835348]
Has anybody an idea about the number of this knife? Some old Wenger catalogs etc.?
It's about 97mm long (closed)I'm sorry, I have no information on this knife but I think it's an old one (1916's to 1919's?) because of the bail and the stamp...
I have 2 knives very similar with carbon steel blades and Tenite handle, probably from the 1950s based on the stamp, but no more information about them...
@jcfiguet
Many thanks for these interesting info.
@Carl
before jcfiguet's answer, I was about to send it to you :P
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login