What Did You Use Your Multitool For Today?
-
I'm considering using the awl on my Swisschamp to punch a new hole in my belt so I can use it as a tourniquet, then using the saw to amputate my left leg above the knee. Not going to be a pleasant, pain-free day..... :(
That may take a while with such a small saw ;) What's wrong with your knee?
It's a slow day here at the store, plenty of time to get to cutting.... ;) As for the knee, I injured it playing hockey many years ago. It bugged me some, but since I was a bit of a drinker at the time, I never realized just how bad it really was. I got sober and WOW! :o I was in just a bit of pain. My kneecap was knocked off center, and pinned under a muscle, grinding all the cartilage and the meniscus away. The first operation cut the muscle to free the kneecap and removed the frayed cartilage and meniscus. But, the muscles on the inside of my leg had atrophied, and the cap wouldn't stay centered. The second operation cut the top of my tibia and shifted it up, screwed into place, to try and keep the kneecap on center. Worked, but I'm still in constant pain. :( Physical therapy, injections - nothing's worked. Apparently I need a new knee, but insurance won't pay for it since I'm only 34 and will need to have the replacement replaced in 20 years. In other words, it's a total mess.
Dang, that sounds like an ordeal then. So you'll have to wait 20 years or so before you can get a knee replacement?
-
I'm considering using the awl on my Swisschamp to punch a new hole in my belt so I can use it as a tourniquet, then using the saw to amputate my left leg above the knee. Not going to be a pleasant, pain-free day..... :(
That may take a while with such a small saw ;) What's wrong with your knee?
It's a slow day here at the store, plenty of time to get to cutting.... ;) As for the knee, I injured it playing hockey many years ago. It bugged me some, but since I was a bit of a drinker at the time, I never realized just how bad it really was. I got sober and WOW! :o I was in just a bit of pain. My kneecap was knocked off center, and pinned under a muscle, grinding all the cartilage and the meniscus away. The first operation cut the muscle to free the kneecap and removed the frayed cartilage and meniscus. But, the muscles on the inside of my leg had atrophied, and the cap wouldn't stay centered. The second operation cut the top of my tibia and shifted it up, screwed into place, to try and keep the kneecap on center. Worked, but I'm still in constant pain. :( Physical therapy, injections - nothing's worked. Apparently I need a new knee, but insurance won't pay for it since I'm only 34 and will need to have the replacement replaced in 20 years. In other words, it's a total mess.
Dang, that sounds like an ordeal then. So you'll have to wait 20 years or so before you can get a knee replacement?
I sure hope not. If the most recent round of injections (anti-inflammatory and -arthritis) don't do anything, it's an appeal to the insurance company. The shots take about 8 weeks to take full effect, and I had the last one three weeks ago. We shall see. Today's another :( walking day.........
-
[quote author=jerseydevil link=topic=12238.msg810405#msg810405 date=1386249234]
I'm considering using the awl on my Swisschamp to punch a new hole in my belt so I can use it as a tourniquet, then using the saw to amputate my left leg above the knee. Not going to be a pleasant, pain-free day..... :(That may take a while with such a small saw ;) What's wrong with your knee?
It's a slow day here at the store, plenty of time to get to cutting.... ;) As for the knee, I injured it playing hockey many years ago. It bugged me some, but since I was a bit of a drinker at the time, I never realized just how bad it really was. I got sober and WOW! :o I was in just a bit of pain. My kneecap was knocked off center, and pinned under a muscle, grinding all the cartilage and the meniscus away. The first operation cut the muscle to free the kneecap and removed the frayed cartilage and meniscus. But, the muscles on the inside of my leg had atrophied, and the cap wouldn't stay centered. The second operation cut the top of my tibia and shifted it up, screwed into place, to try and keep the kneecap on center. Worked, but I'm still in constant pain. :( Physical therapy, injections - nothing's worked. Apparently I need a new knee, but insurance won't pay for it since I'm only 34 and will need to have the replacement replaced in 20 years. In other words, it's a total mess.
Dang, that sounds like an ordeal then. So you'll have to wait 20 years or so before you can get a knee replacement?
I sure hope not. If the most recent round of injections (anti-inflammatory and -arthritis) don't do anything, it's an appeal to the insurance company. The shots take about 8 weeks to take full effect, and I had the last one three weeks ago. We shall see. Today's another :( walking day.........
[/quote]Bummer man...I hope the insurance company will be sympathetic to your situation and get you a new knee

-
A dead day today at the store, so I got to play Santa's helper and put together something for the daughter of one of the owners.....
<a href="http://s1102.photobucket.com/user/Jerseydevil379/media/Mobile Uploads/IMG_20131221_112717_zps41qc138a.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1102.photobucket.com/albums/g448/Jerseydevil379/Mobile Uploads/IMG_20131221_112717_zps41qc138a.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://s1102.photobucket.com/user/Jerseydevil379/media/Mobile Uploads/IMG_20131221_123144_zpsv3fg4ovy.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1102.photobucket.com/albums/g448/Jerseydevil379/Mobile Uploads/IMG_20131221_123144_zpsv3fg4ovy.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1102.photobucket.com/user/Jerseydevil379/media/Mobile Uploads/IMG_20131221_132528_zpscrfosp8m.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1102.photobucket.com/albums/g448/Jerseydevil379/Mobile Uploads/IMG_20131221_132528_zpscrfosp8m.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Thing was a pain in the ass! Used the MP600's Phillips to drive screws into holes that in some cases were re-bored with the SI's awl......
-
Used the MiniChamp today to open cigar boxes of new inventory at the shop. I was using the Rescue Tool but one of the customers looked at me funny when I pulled it out to open a box. I really am liking the 111mm frame right now but customers obviously aren't

-
@stealth007s said:
Used the MiniChamp today to open cigar boxes of new inventory at the shop. I was using the Rescue Tool but one of the customers looked at me funny when I pulled it out to open a box. I really am liking the 111mm frame right now but customers obviously aren't
I dig the 111mm too, and I really never thought I would. I'm in a similar situation though, in that I wouldn't pull it out at work unless I wasn't around coworkers. It's not exactly an office knife, and many wouldn't see a need for a knife at all. My position would probably get by with a smaller knife without many odd looks, but something the size of the 111mm knives is a bit much to most. It's a great knife though, and I like my OHMasterRT very much
I still think I will end up getting a OHT NS so that I have the PE blade that I can sharpen. -
@Monrogue said:
I dig the 111mm too, and I really never thought I would. I'm in a similar situation though, in that I wouldn't pull it out at work unless I wasn't around coworkers. It's not exactly an office knife, and many wouldn't see a need for a knife at all. My position would probably get by with a smaller knife without many odd looks, but something the size of the 111mm knives is a bit much to most. It's a great knife though, and I like my OHMasterRT very much
I still think I will end up getting a OHT NS so that I have the PE blade that I can sharpen.That front side serration has grown on me. I'd have never thought it would be one I like as I don't really do CE blades much. I think the sharpening thing is what gets me the least about CE. I have sharpening equipment for serrated. I think it's more the grabbing of the material when I'm cutting something that I like the least about CE. The 111mm CE blade is excellent to me though.
-
I dig the 111mm too, and I really never thought I would. I'm in a similar situation though, in that I wouldn't pull it out at work unless I wasn't around coworkers. It's not exactly an office knife, and many wouldn't see a need for a knife at all. My position would probably get by with a smaller knife without many odd looks, but something the size of the 111mm knives is a bit much to most. It's a great knife though, and I like my OHMasterRT very much
I still think I will end up getting a OHT NS so that I have the PE blade that I can sharpen.That front side serration has grown on me. I'd have never thought it would be one I like as I don't really do CE blades much. I think the sharpening thing is what gets me the least about CE. I have sharpening equipment for serrated. I think it's more the grabbing of the material when I'm cutting something that I like the least about CE. The 111mm CE blade is excellent to me though.
If I could sharpen serrations with confidence, then I wouldn't mind it, but I don't want to mangle the edge. It's plenty sharp though, and I don't think I'd wear it down anytime soon with my light type of use. I don't typically cut anything too rough, so it should last a long time. I should learn to sharpen serrations though as I have a few blades with them.
-
I used my Vic Sportsman to cut up some cheese :)

-
[quote author=bmot link=topic=12238.msg817013#msg817013 date=1387715583]
I used my Vic Sportsman to cut up some cheese :)Edam?

Gouda, of course


Why not use it on real cheese, like Gruyère

[/quote]I actually don't like Gruyère so much... (except in fondue, of course... :) )
-
[quote author=bmot link=topic=12238.msg817013#msg817013 date=1387715583]
I used my Vic Sportsman to cut up some cheese :)Edam?

Gouda, of course


Why not use it on real cheese, like Gruyère

[/quote]Or perhaps something with a bit more bite, like a mature Cheddar.
:D -
[quote author=Spatha link=topic=12238.msg817256#msg817256 date=1387766023]
[quote author=bmot link=topic=12238.msg817013#msg817013 date=1387715583]
I used my Vic Sportsman to cut up some cheese :)Edam?

Gouda, of course


Why not use it on real cheese, like Gruyère

[/quote]Or perhaps something with a bit more bite, like a mature Cheddar.
:D
[/quote]Actually, that is what the cheese knife is for
Wait bmot, you don't like Gruyere, you don't like Sachertorte :ahhh
-
Just used the ST300 and the Skele CX to clean up a filter on the bathroom sink faucet. The jaws on the Spirit didn't open enough to grab it.

-
I used the cap lifter on my new Danish black Alox Vic Cadet to pry off the bolt-caps on the wheel of my car, so I could change the flat tire, after Christmas dinner -.-
-
I used the PS4's pliers to loosen a plastic thingy connecting two parts of a baby toy during the opening process.
Sent from my XT901 using Tapatalk
-
I used my Swiss Tool today to liberate several children's toys from the packaging this morning. I used the plain edge for the tape, the screwdriver for the screws, the serrated blade for the string/rope, and the pliers to bust a few zip ties. They sure do have some secure packaging now days.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
