crackout's Adventures in Alox.
-

Finished! I love these.
-
Nice!
sent from Nate's mobile
-
Very nice. :)
-
I always wanted to try to turn some 91mm in 84mm scissors. I think it came out fine.






-
the scissors in my "Double Recruit" are cut down 91mm's just the same as this. -
Btw, I had to modify the spring and the lower blade as well, otherwise the scissors would stick out.

-
The scissors I used had one broken tip so I had to re-profile them anyway. Also I used a blade spring and a rest at the free end.
-
The last step to my perfect Cadet. The ribbed vintage scales.
I found a beat up Waiter on eBay, and I knew, this is the missing puzzle piece.Carnage...

And after some magic it's finally done!



Case closed. :tool:
-
That's a beauty right there

-
Here are a few more pictures. I also weathered the screws by heat colouring.
You won't believe how much effort and time as well as money went into this sucker.Included:
- 3 Cadets for the tools and liners
- 1 vintage Waiter for the scales
- 1 vintage 84mm Climber for the scissors spring
- 1 MyFristVictorinox for the saw
- 1 Compact for the 91mm scissors
- drilled out pivot holes
- threaded pivots
- modified 91mms scissors and modified 84mm scissors spring
- heat coloured button head screws
- hours and hours of fiddling



-
Gorgeous.

-
I used a modern 91mm scissor spring in my Urban Cadet (84mm Cadet, with 84mm vintage scissors added). There are two issues to overcome:
1.....the hole the scissors spring locates into is too small for a modern spring. I very carefully ground (Dremel, sanding disk) just a smidge off the curl of the spring, then squeezed it down till it fit the hole tightly.
2....when the scissors close in the knife, the spring is a bit too "open" to permit proper closure. I used a small pin punch in the offending spring bend, and closed the radius till the scissors closed fully. The pin punch was used as a support/stop, in case I closed the spring too far and flattened it.
All told, it only took maybe 10 minutes to modify to my satisfaction. And it's a lot easier than trying to locate a vintage spring. -
I like it, very nice job.

-
BTW, Happy birthday.

-

Finally I could give my Pioneer a red shield! :D
-
It got nice new clothes. :D
-
This will be the next mod. I just have to find some time to redrill the holes (OH 111mm and Slide-Lock 111mm have different hole sizes).

And I finally got a bigger box to store all the fodder in. :D

-
-
I found a perfect condition vintage Golfer and decided to harvest the thick tang blade and the nice scissors for my beloved Cadet to replace the modern blade and the converted 91mm scissors.



:tool:
-
Gorgeous looking mod. Lately I've fallen out of love with the standard bottle opener, and now I'm more a fan of the combo one.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login