Making a transparent SAK
-
Tonight I made a transparent SAK. <a href="http://s782.photobucket.com/user/johnwsjr3/media/8F2E0F1D-43B6-4E73-A3AF-CF61486F58A1_zpsrdry6wmb.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/8F2E0F1D-43B6-4E73-A3AF-CF61486F58A1_zpsrdry6wmb.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
The idea is not a new one that I came up with, and I've seen a picture of it done to a buck knife, (somewhere on here) but I haven't seen anyone actually do it with a sak until now. So this is how I did it. The first step was getting the scales. I bought some regular plexiglass from home depot. Important-if the plexiglass has a protective plastic on it, do not take it off until the knife is completely finished. I first traced an old sak scale with marker on the plexiglass, then did a rough cut around it on the scroll saw. <a href="http://s782.photobucket.com/user/johnwsjr3/media/2FCD71E8-EFAF-456F-A919-0C72B713CB8D_zpssb0lmbtt.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/2FCD71E8-EFAF-456F-A919-0C72B713CB8D_zpssb0lmbtt.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I then carefully cut out the scales by the lines I had traced.<a href="http://s782.photobucket.com/user/johnwsjr3/media/0AE6A14F-657B-44D1-A530-66E4CDE04751_zpsfehfxfr5.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/0AE6A14F-657B-44D1-A530-66E4CDE04751_zpsfehfxfr5.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
After cutting on the scroll saw, I sanded the edges with 150 grit sand paper. The next step was getting the knife parts. I had a really junky old explorer lying around so I decided to use that. If you don't know how to dismantle and mod a sak I recommend reading the "A how to for basic sak mods" thread here http://forum.multitool.org/the-mod-squad/a-'how-to'-for-basic-sak-mods-pic-heavy/ I took only the blade layer from the sak, because the thinner the final knife, the more transparent it is. I also didn't want the corkscrew sticking out the side, so I put the awl/ reamer in its place.
<a href="http://s782.photobucket.com/user/johnwsjr3/media/64EE6868-B3F8-4021-B79F-6A648594537D_zps5w0wp90i.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/64EE6868-B3F8-4021-B79F-6A648594537D_zps5w0wp90i.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Once I had the parts and the scales, I put the scales together and put dabs of hot glue on the edges. This was only meant to hold them together temporarily, so I didn't use very much.
<a href="http://s782.photobucket.com/user/johnwsjr3/media/A0A182D1-7323-492D-AC20-198EEB00185E_zpslq9uj9ph.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/A0A182D1-7323-492D-AC20-198EEB00185E_zpslq9uj9ph.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://s782.photobucket.com/user/johnwsjr3/media/F9716EE8-3ED9-4CDB-A103-593FB5EE19A9_zpsceegqsj9.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/F9716EE8-3ED9-4CDB-A103-593FB5EE19A9_zpsceegqsj9.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s782.photobucket.com/user/johnwsjr3/media/D0A3D3A9-A081-4BCA-B835-8421DD5690A5_zps2zscbbkj.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/D0A3D3A9-A081-4BCA-B835-8421DD5690A5_zps2zscbbkj.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Now that the scales were stuck together, I took a liner from the knife and placed it on top of them. I used a sharpie to mark the plexiglass through the holes in the liner. This is where I drilled the holes for the pins.
<a href="http://s782.photobucket.com/user/johnwsjr3/media/1CD758B9-0A93-4302-B50C-543DB25D3E6A_zpsfa5aqkdd.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/1CD758B9-0A93-4302-B50C-543DB25D3E6A_zpsfa5aqkdd.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://s782.photobucket.com/user/johnwsjr3/media/2B41A68B-EEB7-4F5E-8803-D53495676B8B_zps46wwqwpj.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/2B41A68B-EEB7-4F5E-8803-D53495676B8B_zps46wwqwpj.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I then went to the drill press and drilled the holes for the pins, keeping in mind the different sizes for the different pins.
<a href="http://s782.photobucket.com/user/johnwsjr3/media/381998FF-520D-4D46-AE4E-BAA9FF419E5C_zpstndmqvk5.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/381998FF-520D-4D46-AE4E-BAA9FF419E5C_zpstndmqvk5.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://s782.photobucket.com/user/johnwsjr3/media/7F94A677-C7BA-49B7-8F0F-71F4773052AF_zps097uslza.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/7F94A677-C7BA-49B7-8F0F-71F4773052AF_zps097uslza.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I don't have metric drill bits, so for the larger pins I used a 7/64 drill bit; for the smaller pins I used a 3/32 drill bit. Next I chipped the glue off the sides of the scales using my finger nails. I then had two scales with the proper holes drilled. <a href="http://s782.photobucket.com/user/johnwsjr3/media/6E78A226-23BE-426B-BA3B-27D945A8EF4A_zpscgdzyg9q.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/6E78A226-23BE-426B-BA3B-27D945A8EF4A_zpscgdzyg9q.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
After that I peened one end of each pin. I did it on the metal table of my scroll saw, but any firm metal surface should work. while I peened, I held the pin with needle-nose vice grips. I used a 4oz ball peen hammer for all of this. <a href="http://s782.photobucket.com/user/johnwsjr3/media/FB56DED1-2D9A-4102-B806-11D15458A19A_zps69u1okbu.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/FB56DED1-2D9A-4102-B806-11D15458A19A_zps69u1okbu.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
With one side of each pin peened, I put all the parts in the scales. The nail nick for the awl was covered up, so I drew on the plexiglass with sharpie where it was. I then brought the scale back to the scroll saw and cut out a little arc, similar to how you access the awl on Wenger knives. I then used my dremel to polish the rough edges of the scales. Afterwards, I put all the parts together. I then cut and filed each pin to an appropriate length and peened them.
<a href="http://s782.photobucket.com/user/johnwsjr3/media/485F68FD-0782-447F-9DD2-D4BB93CB2953_zpsglmz2nxp.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/485F68FD-0782-447F-9DD2-D4BB93CB2953_zpsglmz2nxp.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://s782.photobucket.com/user/johnwsjr3/media/561CCD32-B5FB-44DB-82A1-708EAB704DDE_zpsvituju7y.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/561CCD32-B5FB-44DB-82A1-708EAB704DDE_zpsvituju7y.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Finally I was done, and had a transparent swiss army knife.
<a href="http://s782.photobucket.com/user/johnwsjr3/media/54178CCC-8EA2-48A8-B2C1-C430E25782DF_zpsnjlgrjdv.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/54178CCC-8EA2-48A8-B2C1-C430E25782DF_zpsnjlgrjdv.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://s782.photobucket.com/user/johnwsjr3/media/8F2E0F1D-43B6-4E73-A3AF-CF61486F58A1_zpsrdry6wmb.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/8F2E0F1D-43B6-4E73-A3AF-CF61486F58A1_zpsrdry6wmb.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s782.photobucket.com/user/johnwsjr3/media/DA4ECB8D-3CFC-42A5-B885-FEA67FB51F51_zpsamvkwiyb.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/DA4ECB8D-3CFC-42A5-B885-FEA67FB51F51_zpsamvkwiyb.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s782.photobucket.com/user/johnwsjr3/media/7C770BBF-1DCC-4E8C-BE7F-42B1268DD26A_zpshwn9e605.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i782.photobucket.com/albums/yy110/johnwsjr3/7C770BBF-1DCC-4E8C-BE7F-42B1268DD26A_zpshwn9e605.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
It doesn't look so great with my cell phone photos in low light, but in real life it's beautiful! :)
-
first! that is beautiful!!!!!
second, any plans of making more to sell?
I would love that just to watch how the spring works alone!
-
Wow Nhoj, that is crazy-I like it
:D Great job buddy 
-
first! that is beautiful!!!!!
second, any plans of making more to sell?
I would love that just to watch how the spring works alone!
I'm not sure what I'm going to do. I am certainly going to make one for a giveaway though.
Sounds good, I know I would pay to have one of those. I actually wish I had the tools to do work like that, maybe one day. thanks for sharing, (more like enabling!!!) great work
-
That's superb.

-
Here was the inspiration: /topic/32514
It's post #7. -
Nice... Maybe a Transparent Bantam or Waiter next? Maybe even thicker?
-
Thats a real beauty and a wonderful idea, even if it was taken from a different knife. I would love to see a deluxe tinker with those scales.

-
Very nice - I like all those see-trough things where you can see the inside of stuff trough the transparent cases. Great to see it done on a SAK!
-
I'll echo everyone's comments here!
Superb Nhoj

I'm surprised the plexiglass withstands the stress/tension. I would never have thought it could.
Excellent!!

-
Very nice

-
-
What a great idea! And very nice finished product.

-
Thank you everyone. I'll try and take some better photos with my phone today. :)
-
@tosh said:
I'm surprised the plexiglass withstands the stress/tension. I would never have thought it could.I was thinking the same
cuz Syph007 did something similar in this thread: Playing with polycarbonateAnd he said Plexi will crack very easy, but you can literally beat Polycarbonate with a hammer and it will not.

-
I'm surprised the plexiglass withstands the stress/tension. I would never have thought it could.
I was thinking the same
cuz Syph007 did something similar in this thread: Playing with polycarbonateAnd he said Plexi will crack very easy, but you can literally beat Polycarbonate with a hammer and it will not.

That's interesting. I didn't know there were any other clear saks.
-
I'm surprised the plexiglass withstands the stress/tension. I would never have thought it could.
I was thinking the same
cuz Syph007 did something similar in this thread: Playing with polycarbonateAnd he said Plexi will crack very easy, but you can literally beat Polycarbonate with a hammer and it will not.

I don't think there is any risk of the plexiglass cracking. It can snap the thin way but the way that the stress is applied in the knife it's pretty strong.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


