Waiter Alox
-
VERY nicely done.
I think it's one of the best ones I've seen so far. 
-
I'm no modder, but I can tell you that yes, you need to use thread locker.

-
yes for sure I use the red threadlocker
-
Found this quite some time ago on threadlockers and bookmarked it. Might be of some use.
Here's the order of strength:
Locktite 220 Low Strength/Wicking, Color blue
Locktite 222MS Low Strength, Color Purple
Locktite 242 Medium Strength (removable), Color Blue (this is the one found in most stores)
Locktite 248 Stick Med. Strength (removable), Color Blue
Locktite 262 High Strength, Color Red (also in most stores)
Locktite 268 Stick High Strength, Color Red
Locktite 290 Wicking, Color Green
SOURCE: http://www.knifenetwork.com/forum/showpost.php?p=178841&postcount=7
-
I like this.
Should come standard from the factory. :D -
Should be more than happy, should be proud!
Didn't think you could do it and have it look so wel!

-
OK, so my nuts are locked, because let's face it, we all need tight nuts :) And yes, I know they are screws before anyone points it out.....
Thanks for all your kind words, quite a fun little project. I can't see myself doing any more (no need) but I'll certainly drop by from time to time. During this task I picked up a few good UK suppliers and metric measurement tips, and happy to share if anyone would like to PM me.
Cheers
-
Wouldn't M2 at 2.2 be rather thin if in brass?
-
Ya for the small 2.2 mm size, it almost seems worthwhile exploring just making custom nuts and threading the 2.2 rod itself. It would work I think...

-
Great minds and all that, a similar thought occurred to me a couple of days after I finished it. I came up with the idea of still using a threaded 2.2mm brass rod as a pivot but running a longer M2 screw right through the other side with a domed nut on the other side.
Saying that, over the festive season I used it to open a handful of bottles of wine, a couple of which were quite stubborn, and it held up fine. It's also been used in day to day tasks, and is still as 'snappy' as when it came off the bench. However, if one of the pivots does ever fail I think I would replace them using the above method.
-
Very nice work !
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login