I think its time. :D
-
I have owned SAKs for a long time, I have quite a few now and figure its time to take the next step.
Yep time to do my first tool swap, I picked up a hiker just for this project.
The plan is to replace all the none hiking tools for something I can use in the woods.I need suggestions for tools to replace the following.
The tools I don't want are things I have on other SAKs:
Phillips head screw driver.
Can opener.
Bottle opener. -
It would help if we knew what size you were considering modding. I'm assuming the 91mm Vics, right?
The can and bottle opener layer you can simply remove and assemble without them.
As for the phillips, which one? Inline or back layer? The only tool you could put in place of the back layered on the 91mm without heavy modding is the corkscrew. I can't recall a 91mm SAK without a back tool on the blade layer.
You'd probably have to modify a different spring or create one from scratch for no back tools on the 91mm. 
-
@enki_ck said:
**It would help if we knew what size you were considering modding. I'm assuming the 91mm Vics, right?
**
The can and bottle opener layer you can simply remove and assemble without them.As for the phillips, which one? Inline or back layer? The only tool you could put in place of the back layered on the 91mm without heavy modding is the corkscrew. I can't recall a 91mm SAK without a back tool on the blade layer.
You'd probably have to modify a different spring or create one from scratch for no back tools on the 91mm. 
He said:
So probably 91mm with a back layer Phillips ;)
-
DO not get rid of the opener layer. First, because it has the awl, which can be VERY useful in the woods. Second, the flathead driver is still your primary pry tool. STILL useful in the woods. Third, in a survival situation, there's a fair chance of finding old metal cans, and the can opener can be used to make a wood burning stove out of one. It's also good for splitting nuts, and as a general scraping tool to conserve the edge on your blades.
Just my opinion, but I think the utility of that layer is astounding, and WELL worth its weight in an outdoor setting.
(I know you said it was covered by other saks, but I'm sort of looking at a one-tool setup, here.)
Assuming you're still not dissuaded... I don't know. I can't say which tools there might be that would slot into that layer. In any event, I don't think you want to lose the awl. I'm not sure you could build a 91mm layer with inline awl to replace it if you removed the opener layer altogether.
As for the phillips... you're only other option there is a corkscrew, I think.
-
Mixing an matching tools on the 91mm size is just about impossible do to the very specific springs that each tool uses. There are a few exceptions like combo tool for small blade with main blade layer, corkscrew/phillips, but generally speaking thing of modding 91mm SAKs as mixing and matching layers themselves and not components.
Oh the awl fits under the blade layer, but looks silly with the backscale cutout, unless you make your own scales of course. :D
-
Ok I really don't care about loosing those tools.
I would love a marlin spike, I am considering reshaping the phillips into a small marlin spike for use with the lines on my tarp and hammock.
Then I would also like to fin a way to replace the 2 openers wifh a serrated blade, or modifying the openers to something else, like making the can opener into some sort of tinder scraper. -
Will th scissors from other 91mm models fit in the can/bottle opener slot?
I own a Super Tinker I could use as parts model.
I am not sure what I want to do yet but these are my ideas so far. -
Just ask Syph007 to make you one like mine:

I had it made for precisely the purpose you describe. Outdoors, with a companion SAK or MT. In my case, this will pair perfectly with a Crunch or PST or Rebar. And if I should carry it in the city (and of course I will), it still offers a sturdy knife and excellent scissors without a bunch of redundant can openers and such. So it could also mate up quite well to a Sportsman, Tinker, Spartan variant, or a Cybertool 29.
/shameless promotion of Syph007
-
I'm beginning to move in this direction as well, starting to pick up 91mm cheapos for experimentation. Maybe there are others who will profit from "listening in" to this thread!
My issue is more with the pins. I either go with replacing them (intailing pinning and shaping) or using the screw method which requires drilling out all the tools and the layers (from what I understand) and scale making.
-
Don't forget to read through here...
http://forum.multitool.org/the-mod-squad/sak-modding-guides-all-in-one-place/
-
@n4vgm said:
I'm beginning to move in this direction as well, starting to pick up 91mm cheapos for experimentation. Maybe there are others who will profit from "listening in" to this thread!My issue is more with the pins. I either go with replacing them (intailing pinning and shaping) or using the screw method which requires drilling out all the tools and the layers (from what I understand) and scale making.
Is there a post for the screw method?
I may go that route.My goal is a SAK for fire starting, I would like the knife to contain tools for fire and first aid, I know I know your thiking first aid for fire starting accidents LOL.
what do you want you SAK tools to specialize in?
-
@glorn said:
Just ask Syph007 to make you one like mine:
I had it made for precisely the purpose you describe. Outdoors, with a companion SAK or MT. In my case, this will pair perfectly with a Crunch or PST or Rebar. And if I should carry it in the city (and of course I will), it still offers a sturdy knife and excellent scissors without a bunch of redundant can openers and such. So it could also mate up quite well to a Sportsman, Tinker, Spartan variant, or a Cybertool 29.
/shameless promotion of Syph007
Love this knife
-
"what do you want you SAK tools to specialize in?"
Daily carry for a Librarian. What I think would be good would be the following but I doubt they can exist together in a 91mm frame.
Small blade
Metal (Nail) file
Scissors
Pliers
BO/CO (for drivers)
Awl
Backside Phillips (if I were a Euro-Librarian then the Corkscrew)
Toothpick/TweezersWhen I disassemble a couple and start to understand the layouts maybe I can figure something out. ???
Three layers would be the target but I guess that's out with both scissors and pliers.I feel that I'm just beginning a VERY VERY LOOOONG Journey. (insert walking smiley)
-
MY first. Bare minumum-ish modding.
http://forum.multitool.org/swiss-forum/project-done-take-a-look-pic-heavy!!!/
Needs an epilogue. Half wrote one. Have done more mods since. Lots of little things worth mentioning. Tool/layer compatibility, peening techniques, lots of do's don'ts, and caveats...@sixgun, if the openers aren't a priority then I suggest the 91mm combo tool. Pretty much a tool that does the job of both openers (never know, might just need to open something...like beer) and it only takes the place of the small blade.
In my mind I see you with a Victorinox Compact but with serrated blade instead of plain edge (seems more outdoorsy) with wood saw and possibly metal file/saw. Think the metal file/saw would be a good striker. Don't know for sure though...
Or just add a pair of scissors to your Hiker and replace the phillips with...
You may just want to buy a Huntsman. -
That was a very helpful post, thanks and well done mod!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
