Kirks slip joint field test
-
@styx said:
Looking forward to it. Will you use a benchmark? Will you do repeated runs of the same type of work, how will you judge the performance, will you measure the thickness behind the edge or the edge angle, will oyu make a relative comparison of ease of sharpening with specific values or eyeballing?
damn I've been spending too much time on one other forum...Er yes,yes you have...remember,even though this is a John thread rather than a Kirky thread,I'm still Kirk :fuggly:
To try give rational answers....
The basic benchmarks are 91 and 93mm SAKs. My usual work cutting knife is my TattooSteve99 custom Alox
http://forum.multitool.org/swiss-forum/the-boxer/msg642973/#msg642973It pretty much eats up any cardboard box,or lacking strap it meets.
If anything needs sharpening,I'll use my Lansky,and I'll detail the angles as and when,otherwise I carry one of these
http://www.amazon.co.uk/Victorinox-4-3323-Pocket-Knife-Sharpener/dp/B000AR7AKG/ref=sr_1_1?ie=UTF8&qid=1388951836&sr=8-1&keywords=victorinox+sharpenerAs to relative values in ease of sharpening or use,it's an eyeballing type thing

-
@Zed said:
Ive had a few case knives and rr's and the fit n finnish was just as good on the rr,im looking forwards to your thoughts john
Cheers Paul,JD said much the same. A lot of what this test is about is whether a high value slippie is any better than a cheaply China job.
Thanks to everybody else for the interest

-
Thread is bookmarked, and I am eagerly awaiting further posts

-
That is gonna be interesting. And might also show how well that pocket sharpener works
-
Week one: Rough Rider Peanut
Sooooo....things started a bit earlier than planed. On New Years Eve, I'd been using the Peanut for boxing duties at work,so sorry,I have been fibbing a bit.
So how did it you? Initially not that well. RR knives come reasonably sharp out of the box,but the small blade of the Peanut wasn't cutting it. Well,wasn't cutting cardboard over well. However a few swipes through the Vic sharper rectified that. Whilst the Peanut didn't slice the cardboard as well as the Boxer,that's more down to the smaller size of the Peanut,and the lack of hook in the blade.
Tonight,the Peanut ventured into the kitchen for food prep duties. Got to say I'm really impressed. The Peanut chopped its way through a small onion,two Baby sweet peppers,half a pack of sugar snap peas,chorizo and three chestnut mushrooms with great aploom. In fairness,if it had been regular sized onions and peppers,it would have struggled,only having a two inch blade.
So far,I am so impressed with this £8 knife!
-
Making this post just so I don't miss the updates. :D I'm a fan of the Rough Rider's I've had, and my Case, so I hope these work for you as well.

-
Thanks John, now I have the urge to carry a.... Wait...
This actually might be a bit my fault.... ::) :) I think that RR's are great knives for the money. As users I am very happy with them.
My slipjoints, though an everyday part of my carry, tend not to be my main working blade. I use them all the time if something needs to be opened or cut while on the sales floor or around customers though. The Peanut is a great little pattern, though lately I've been carrying a Case penknife more than the 'nut. Slightly longer main blade in a slimmer package. And like I've said, the Case medium Trapper is one of my absolute favorite traditionals to carry.
Looking forward to seeing how you get along with this experiment. -
@jerseydevil said:
...lately I've been carrying a Case penknife more than the 'nut. Slightly longer main blade in a slimmer package.My first knife ever was a Case pen knife. I still have it, and though I don't carry it much any more, it is still a great little knife. I also like how it feels a bit more balanced and symmetrical than the peanut.
Not to totally derail the thread; I'm looking forward to reading Kirky's results as well.
-
Not a very exciting day at Blamington Hall,in terms of sharp and shinies. Still no sign of the Buck or the Case
. If the Buck doesn't show up tomorrow,I think it'll be irate email time 
Anyway,for want of anything more interesting to say,let's have a closer look at the Rough Rider Peanut.
As said before,it was ordered from Heinnies,for £7.95 ex postage....you just couldn't complain at that price! If you'd never owned a Rough Rider before,you'd be wondering how good the quality is. The blades are 440 stainless,and are nicely polished. Unusually,I needed to run it through my Vic sharpener at work to get the blades up to fully useable sharpness,but given that they only needed three sweeps,they weren't that far off the mark. Snap is good. It lacks the satisfying clunk of a Victorinox,but is positive both opening and closing. It inspires confidence

The scales are listed as being jiggled bone,whether they're real or synthetic I don't know,but they feel good to the touch! As to the fit and finish? Well see for yourselves...

I love the little name badge. It's beautifully detailed,and just adds oddles of character to the knife. I know I've already said this,but the little Peanut has won my heart! Its performance in the kitchen last night impressed me no end! There's at least one more of these I'd like...I'll just have to see if there's a way to get it out of the States

-
I've had a couple of RR's and I'm baffled how they can make such a good knife, ship it across half the planet and still make a profit ??? :)
Sent from my Nexus 7 using Tapatalk
-
@Mike, Lord of the Spammers! said:
I've had a couple of RR's and I'm baffled how they can make such a good knife, ship it across half the planet and still make a profit ??? :)Honestly Mike, so am I. Right now I have a RR Barlow in my pocket at work, and I'll put it up against any Case or Queen I have as a user......
-
@Mike, Lord of the Spammers! said:
I've had a couple of RR's and I'm baffled how they can make such a good knife, ship it across half the planet and still make a profit ??? :)
Honestly Mike, so am I. Right now I have a RR Barlow in my pocket at work, and I'll put it up against any Case or Queen I have as a user......
+1

I am really impressed with RR's knives. Almost all I have had are well built, solid and great users.Sent from a device made from star dust using Tapatalk
-
The Barlow I'm carrying today is actually the one I got from your giveaway, Grathr.

-
-
@jerseydevil said:
The Barlow I'm carrying today is actually the one I got from your giveaway, Grathr.
:)Sent from a device made from star dust using Tapatalk
-
The rifleman range has very sexy jigging on the scales and is considerd a "premium" RR brand. (hint-> box)
I find the one you have, with the squared bolsters, very intersting.I have tried using a peanut but I find that the minimum for me is the mini toothpick (some come with two blades too). The peanut's blades and its body are just too small.
I like the peanut's big brother, the barlow. -
@Mike, Lord of the Spammers! said:
I've had a couple of RR's and I'm baffled how they can make such a good knife, ship it across half the planet and still make a profit ??? :)Sent from my Nexus 7 using Tapatalk
I guess it just shows how much profit Case (and other knife makers) is raking in, even with their higher operating cost.
-
Nothing much to say about today's day at work...the Peanut rode very comfortably in my pocket,took on a couple of boxes without any trouble

Big news is that the Buck Deuce arrived today
...or rather 
Not best impressed in how long it took AllOutdoors took to deliver the Deuce

And just to add insult to injury,the Deuce isn't the knife I thought it would be
Turns out its a China built 305,not the bigger 309
On the up side,it's well built,fit and finish are good,it's got a nice edge on the blades,and if I'm to be honest? Its a darling little thing :D,just wish it were bigger.Pictures in a bit
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



