Show off your Sak mod's!
-
Is that a Vic Phillips in there or did Wenger make one, too?
And, as I seem to have missed the first 2 incarnations - Are there any pictures of the process?! -
@enki_ck said:
I added a few more pics. :DI need to source some new scales for it though as these were taken off and put back on one too many times.
The attachment point at the phillips isn't holding too good anymore. But I like those scales as they came from my first ever SAK so I might just add a drop of rubber cement there and keep them. ;)A very small amount of Epoxy in the scale blind holes will keep the scale on perfectly.
I clamp mine till the epoxy sets. -
Is that a Vic Phillips in tehre or did Wenger make one , too?
And, as I seem to have missed the first 2 incarnations - Are there any pictures of the process?!Wenger makes a Phillips, too. It's a standard Wenger layer, Phillips and wrench ;)
Thanks. Seems I should get a few Wengers, I think.
-
Is that a Vic Phillips in tehre or did Wenger make one , too?
And, as I seem to have missed the first 2 incarnations - Are there any pictures of the process?!Wenger makes a Phillips, too. It's a standard Wenger layer, Phillips and wrench ;)
Thanks. Seems I should get a few Wengers, I think.
Out of the top of my head, the Cyclist, Nomad and S557 have it ;)
-
@lowtech said:
Is that a Vic Phillips in there or did Wenger make one, too?
And, as I seem to have missed the first 2 incarnations - Are there any pictures of the process?!I started this mod back in December 2011. :ahhh
Here's the 1 version, with saw and Vic combo tool. LINK TO POST in this thread from back then with more pictures.

I decided later on I didn't need the saw that much in an urban environment so I dropped that and the Vic combo tool, while perfectly functional didn't have that perfect snap so I replaced it with a nail file.

Not sure if I ever posted a detailed thread/post of that change and when it happened. :think:
I later decided I needed a combo tool for the locking screwdriver and opener which led to this.
Here's a thread from the beginning of the mod and I'll add a few other pictures there soon. :salute: There's a list of most models with the phillips I posted for another member some time ago.
-
Which tool has that combo tool?
That is one of my favorite mods for sure.
-
Thanks, Enki.
Rick, the 91 Vic combo tool can be found in the Compact.
-
Rick, the 91 Vic combo tool can be found in the Compact.
I think Rick is talking about the Wenger combo tool.
@rickinFL said:
Which tool has that combo tool?That is one of my favorite mods for sure.
If you want a corkscrew, Entree
If you want a phillips, Junior 10 (blunt tipped blade though, but you can source another one)
If you don't want any backtools, Picnic.
You asked me before, when I bought it and started talking about this mod, if a combo tool from a Picnic would be a simple drop in. Nope. :-\The combo tool/knife layer uses a different kind of backspring to the nail file/knife as it has to make room for the wider tool.
Here's a Picnic backspring, my modified one and a standard nail fine one. I grinded to middle one to be able to use the lock but the combo tool would stick out a few millimeters too far out when closed. So I reused another backspring from my stash.

So for easier modding, get the one with the tool set you want and just transfer the whole layer. Knife blades are the same and you can swap the butter blade for proper one.
-
-
Who would have thought that a Wenger mod would get so much attention. :P We need to see a lot more of them then.

:D
-
@enki_ck said:
You asked me before, when I bought it and started talking about this mod, if a combo tool from a Picnic would be a simple drop in. Nope. :-\The combo tool/knife layer uses a different kind of backspring to the nail file/knife as it has to make room for the wider tool.Here's a Picnic backspring, my modified one and a standard nail fine one. I grinded to middle one to be able to use the lock but the combo tool would stick out a few millimeters too far out when closed. So I reused another backspring from my stash.
So for easier modding, get the one with the tool set you want and just transfer the whole layer. Knife blades are the same and you can swap the butter blade for proper one.
Yes, I can tell the same. I tried to modify a normal spring to put the combo tool and had the same problem. It's better to look for a model with the combo tool and use that spring. I was trying to make a model that doesn't exist (I think), with locking blade and combo tool, but I couldn't make it work properly. In my experience, it's easier to modify a picnic model spring to use with locking blade that to put a combo tool on a common spring for file or small blade.
-
Talking about Wengers mods...
My last hiking sak. Locking blade, saw, awl instead the corckscrew, no can and bottle opener layer. Exposed rivets. The most difficult part was to find 0.4 mm aluminium sheat to make the spacer that makes de awl fits in that layer.


You can see the spacer here.

I actually have to rebuild it. You can see in the last picture that the spacer is not perfect, I made a mistake and I broke it hammering the little rivet that holds it. But these pictures are a good sample of how the finished product it's going to look like.
-
I'm really liking this mod, as I had something similar planned.
Sans the locking blade though. Why did you decide on the exposed rivets? For the looks? :DI've been thinking of maybe making a Wenger Solo too.

-
@enki_ck said:
Why did you decide on the exposed rivets? For the looks? :DI just like the appearance, it looks a bit retro. It's inspired on the Proffesional series of Wenger.
Pros and cons: it makes the knife stronger in the way the scales can't fall off or get loose and the toothpick and tweezers are well stored. On the other hand, if the scales break, the rivets and tools could get loose.
-
That is a stock first mate. Uploaded by accident with others.
-
I already showed my 84mm Ebony Golfer with hook and plus scales. So that's not really new...
Now I reassembled it. I managed to grap a 84mm climber with long nail file, corroded liners and in an overall poor condition. However, the nail file, scissor and spring were good enough.
That's the result:


Note the hand made pin for the nail file

and the hand made cutout

-
Nice restoration job, Henry.

-
Really cool SAK HankSolon

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
