After a new tool!
-
I think the Spirit (and Spirit X), while an awesome tool, might miss due to price.
For shear pocketability, I'd really consider the original Leatherman PST. You can pick them up fairly cheap. No locking blade, but very slim, light, and solid tools.
I might even recommend a Juice, like the S2, used, to bring down the price. Much smaller, but very comfortable pocket carry.
If the blade is the main thing you're looking for, I'd second the notion of a Victorinox Farmer. While the blade is non-locking, they're AWESOME, rock solid tools that are shockingly light (3oz., 86g) , for their toolset.
-
@rdub934 said:
A Wingman or Sidekick are lighter than the Wave line, and have a OHO knife. Quality is lower than a Wave and Swistool but they are still good tools. They both fall significantly lower on the price scale than what you are looking to spend.
I can't believe I didn't think of these, considering they are two of my favorite MTs to carry...
to me on that one. They are good, basic tools with probably all you'd really need, for a great price. -
I would start with a few more questions, how often is a plier used or needed? How important is a one hand opening blade? You mention using cutters for electrical work so that would be high on list? Pocketable since you don't wear anything on your belt also factored in.......
I would tend to agree on the juice line with their small size and good tool set.
The Spirit is an excellent tool and you would be right at home with it since you have the big brother. I'm not so sure pocket carry is ideal with this tool but YMMV. I also recall Enki's video of the wire cutter not performing so great. ( I think I got that right??)
I was thinking the Victorinox Electrician Alox especially if you don't need or use pliers often. This tool however is missing a Phillips driver if that's important.
I really like the Master Electrician with the inline Philips and small plier. Not sure how available it is to you.
The wingman and sidekick are great options and both have nice simple tool sets.
-
@Sparkydave said:
Although I use the pliers a bit the cutters are almost never used as I have to use vde snipsMaybe a Swiss Army knife is the way too go??
Sent from my iPad using Tapatalk
Perhaps so. I guess the best thing to do is figure out what implements you really would like/need and let us know. I'm sure someone here could give you some good suggestions. I think there is also a SAK Selector function here?
-
Victorinox Electrician?
-
The great thing is you already have a superb tool in the swisstool and you can have that close at hand while complimenting it with a great SAK as most do anyway. I carry a Swisstool and a Spirit regularly and always compliment them with SAKs. I like the Explorer Plus very much and switch with a Swisschamp and even a Wenger Tradesman. The cadet may even be your cup of tea with its smaller size or the Pioneer if we are staying with Alox. I'd say for blade and some driver usage a SAK can accomplish quite a bit in a small package and you don't have to stick with Alox at all. Heck even a Super Tinker is a terrific SAK offering a lot in 3 layers. If you were in the CONUS I'd shoot you out a recruit to fiddle with.
-
The four that spring to mind are the Leatherman Sidekick, Wingman and Skeletool and the Gerber Octane. All lightweight, have one handed blades, and nothing too flimsy.
Problem with the Sidekick and Wingman might be the fact the small flat driver won't go anywhere near a choc-block terminal. The large flat and Phillips don't lock, but for light use I've not found them a big problem.
Personally I don't like the feel of the Skeletool in my hand, but lots of other people disagree so there is no reason it might no suit you. The flexibility of the Leatherman bits is a bonus, but the fact you can only use the screwdriver with the legs open is a downer IMO (when the Skele is folded the driver is hidden under the carbinier).

I actually really like the Octane HOWEVER the one I got had very poorly finished screwdrivers (large was too fat, small was too thin, Phillips ground to the wrong angle ::)), I sorted them myself but I should really have returned it. Happily I've seen much better examples than mine. :)
All have potential upsides and downsides depending on your needs. Let us know what you decide to go for.

-
Have you looked at the Victorinox Swisstool Spirit X?
It has a similar toolset to the Swisstool and is the same, but is around 3 oz lighter, has curved handles, and is half an inch shorter.

-
Maybe it will be a wingman or sidekick then. As for terminals etc I usually have a terminal driver on me somewhere. Also been thinking of making a little kit up the hospital is huge and it sucks being at one end then doubling all the way back for some pliers or a bit tape
Sent from my iPad using Tapatalk
-
@Sparkydave said:
Maybe it will be a wingman or sidekick then. As for terminals etc I usually have a terminal driver on me somewhere. Also been thinking of making a little kit up the hospital is huge and it sucks being at one end then doubling all the way back for some pliers or a bit tapeSent from my iPad using Tapatalk
I served my time as a maintenance (mechanical) engineer in hospitals.
Yeah, there are a few basics I'd make sure I had on me wherever I was and whatever I was doing, still do TBH. :) -
I've got a little pouch that came with a multimeter for that purpose. I don't carry it all the time but I grab it if I'm expecting to need something but don't really know what.
My MT is my "I'm not expecting to need a tool" tool, my pouch is my "I'm expecting to need something but I don't know what" and then I have toolboxes and workshops for "really, I can't do this with an MT, I need a concrete breaker/soldering iron/4' chain wrench/multimeter/...".
The pouch has my little Irwin water pump pliers, some small locking pliers, a small AJ, the little Bahco ratchet socket/bit set, a "grips anything" wrench, am x-in-1 screwdriver, a terminal driver and some tape.
IME, the stock small driver on the Rebar won't touch choc blocks or terminal blocks, at least the sizes I use commonly. If you grind it down a bit such that the shank is the same size as the time it works well.
-
Maybe it will be a wingman or sidekick then. As for terminals etc I usually have a terminal driver on me somewhere. Also been thinking of making a little kit up the hospital is huge and it sucks being at one end then doubling all the way back for some pliers or a bit tape
Sent from my iPad using Tapatalk
I served my time as a maintenance (mechanical) engineer in hospitals.
Yeah, there are a few basics I'd make sure I had on me wherever I was and whatever I was doing, still do TBH. :)to be honest, I always make sure I have a terminal driver, a pen stick, a multi-tool and more often than not a pair if grips and a shifter
Sent from my iPhone using Tapatalk
-
@Cupboard said:
I've got a little pouch that came with a multimeter for that purpose. I don't carry it all the time but I grab it if I'm expecting to need something but don't really know what.My MT is my "I'm not expecting to need a tool" tool, my pouch is my "I'm expecting to need something but I don't know what" and then I have toolboxes and workshops for "really, I can't do this with an MT, I need a concrete breaker/soldering iron/4' chain wrench/multimeter/...".
The pouch has my little Irwin water pump pliers, some small locking pliers, a small AJ, the little Bahco ratchet socket/bit set, a "grips anything" wrench, am x-in-1 screwdriver, a terminal driver and some tape.
IME, the stock small driver on the Rebar won't touch choc blocks or terminal blocks, at least the sizes I use commonly. If you grind it down a bit such that the shank is the same size as the time it works well.
I have a small little tool pouch thing somewhere I might start loading that up. My tool bag I carry around weighs about 30 kilos-ish. It's a Stanley fat max backpack and it's not too bag to lug about I keep a little impact driver in there with some spare parts and such, used to have a hammer in but that lives in my main toolbox now. Even though I'm a electrician I normally end up doing little bits of joinery/plumbing/hvac! So never know what I'm going to need ha. Mmm might load that pouch up and take a few pictures
Sent from my iPhone using Tapatalk
-
How about Deluxe Tinker? Has good pliers and phillips. Not heavy or bulky. Nice set of tools.
-
I'm a fan of the Skeletool
but as people have said its a bit of a 'marmite' toolI have seen it described as a knife with pliers which I think is a good description and you might find the pliers a bit light weight/slim
Like a lot of tools it might be better to try before you buy

-
@Etherealicer said:
Why not go for a SAK, if you primarily need the Blade.e.g.: Victorinox Farmer
It depends on what you need from a tool, but my Farmers have been bulletproof and have handled pretty much everything I've asked of them. But there so light and compact they disappear into your pocket :)
Sent from my Nexus 7 using Tapatalk
-
@sparky415 said:
I'm a fan of the Skeletool
but as people have said its a bit of a 'marmite' toolI have seen it described as a knife with pliers which I think is a good description and you might find the pliers a bit light weight/slim
Like a lot of tools it might be better to try before you buy

I like the Skeletool too, but I'm a righty. Lefties generally have a different opinion on them. >:D Try holding it in your left hand with the pliers open and you'll understand. ;)
-
Well i picked up a farmer and have a skeletool on the way, after trying it out in the shop. Couldnt really get away with the feel of the wingman but i guess i may try it some day!

-
@Sparkydave said:
Well i picked up a farmer and have a skeletool on the way, after trying it out in the shop. Couldnt really get away with the feel of the wingman but i guess i may try it some day!
Always the way to go if you can.
Let us know how you get along with it at work. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
