And so it begins.... (My adventures into Alox!)
-
So Syph, what is the likelihood of you producing something like this one day? Cause I would go broke if you did lol


Edit: Nevermind, I see the answer to my second question!
-
Haven't seen that Hanes in a while. The idea for that actually originated from this forum.
-
Oh boy.. After reading this thread I know my next step is getting into the mod game.
-AdmSlc
-
-
I'm going to do either this frame-lock or a liner lock to my work EDC Electrician. Why you ask?...
Because the blade closed on my finger a couple of days ago. Sure, I should have been more careful and not trying to plunge-cut with a slippy. But that's not the point!! It bit me and needs to be fixed.

Lucky the blade was sharp and it was a very clean cut, it has knit back together nicely with the help of a couple of wound closure strips. But smurfing hell it bled. -
Nice fleshwound PTRSAK ;)
-
I just picked up a couple of cheap NIB Electricians, so I can definitely rip one apart and have a go at making a lockblade mod. >:D
-
The thing that concerns me slightly is the strength (or possibly hardness) of the aluminium. You'd be jamming a hardened steel blade tang in to a relatively soft and flimsy aluminium scale/lock thing. Call me a pessimist but I can't see that being reliable for long.
Edit: fwiw, I've trimmed down a bit of mild steel of about the same thickness as the Alox scale with my Wave's knife. Not a nice thing to do with it but needs must and it did it.
-
@Cupboard said:
The thing that concerns me slightly is the strength (or possibly hardness) of the aluminium. You'd be jamming a hardened steel blade tang in to a relatively soft and flimsy aluminium scale/lock thing. Call me a pessimist but I can't see that being reliable for long.Edit: fwiw, I've trimmed down a bit of mild steel of about the same thickness as the Alox scale with my Wave's knife. Not a nice thing to do with it but needs must and it did it.
I'm not sure but I think it is a whole new back made from titanium.
-
The thing that concerns me slightly is the strength (or possibly hardness) of the aluminium. You'd be jamming a hardened steel blade tang in to a relatively soft and flimsy aluminium scale/lock thing. Call me a pessimist but I can't see that being reliable for long.
Edit: fwiw, I've trimmed down a bit of mild steel of about the same thickness as the Alox scale with my Wave's knife. Not a nice thing to do with it but needs must and it did it.
I'm not sure but I think it is a whole new back made from titanium.
Yes his front scale is orange g10, back is Ti. The Ti is bead blasted with a fine size glass bead to get that finish. Its been on my list of todos ever since I saw it. :D
I dont care for the detent ball method to retain a blade in closed position, so I think a weak backspring might as well be there to retain it closed. Unless you want a one hand open locking blade then you wouldnt want any backspring.
-
The thing that concerns me slightly is the strength (or possibly hardness) of the aluminium. You'd be jamming a hardened steel blade tang in to a relatively soft and flimsy aluminium scale/lock thing. Call me a pessimist but I can't see that being reliable for long.
Edit: fwiw, I've trimmed down a bit of mild steel of about the same thickness as the Alox scale with my Wave's knife. Not a nice thing to do with it but needs must and it did it.
I'm not sure but I think it is a whole new back made from titanium.
Yes his front scale is orange g10, back is Ti. The Ti is bead blasted with a fine size glass bead to get that finish. Its been on my list of todos ever since I saw it. :D
I dont care for the detent ball method to retain a blade in closed position, so I think a weak backspring might as well be there to retain it closed. Unless you want a one hand open locking blade then you wouldnt want any backspring.
There has to be a spring there, the awl is on the other side :)
Sent from my iPhone using Tapatalk
-
I'm thinking of going with a Ti liner-lock between the blade and scale. I'll be looking at reshaping the tang to work with the lock and may change the rest on the spring to reduce the snap to a minimum level without effecting the awl too much. Think I will be doing a bit of mockup work with some old blades.
I knew that borked blade from the Electrician-Plus would come in handy for something. -
The thing that concerns me slightly is the strength (or possibly hardness) of the aluminium. You'd be jamming a hardened steel blade tang in to a relatively soft and flimsy aluminium scale/lock thing. Call me a pessimist but I can't see that being reliable for long.
Edit: fwiw, I've trimmed down a bit of mild steel of about the same thickness as the Alox scale with my Wave's knife. Not a nice thing to do with it but needs must and it did it.
I'm not sure but I think it is a whole new back made from titanium.
Yes his front scale is orange g10, back is Ti. The Ti is bead blasted with a fine size glass bead to get that finish. Its been on my list of todos ever since I saw it. :D
I dont care for the detent ball method to retain a blade in closed position, so I think a weak backspring might as well be there to retain it closed. Unless you want a one hand open locking blade then you wouldnt want any backspring.
There has to be a spring there, the awl is on the other side :)
Sent from my iPhone using Tapatalk
I'm guessing he made his own backsprings same as Robert does. He also made a new blade for it. The one he uses isn't a Vic one.
-
Is it possible to put the combo tool and large blade (93mm) across from each other on a single layer? Sorry, I'm sure this is a noob question that has been asked before I just can't seem to find an answer out there. It seems like this is the way the Bantam and Compact is set up, and so it should work. However I didn't know if jumping up to the 93mm would cause an issue.
Thanks for the info guys!
-
@dmanuel said:
Is it possible to put the combo tool and large blade (93mm) across from each other on a single layer? Sorry, I'm sure this is a noob question that has been asked before I just can't seem to find an answer out there. It seems like this is the way the Bantam and Compact is set up, and so it should work. However I didn't know if jumping up to the 93mm would cause an issue.Thanks for the info guys!
Yep that works no problem.
-
Is it possible to put the combo tool and large blade (93mm) across from each other on a single layer? Sorry, I'm sure this is a noob question that has been asked before I just can't seem to find an answer out there. It seems like this is the way the Bantam and Compact is set up, and so it should work. However I didn't know if jumping up to the 93mm would cause an issue.
Thanks for the info guys!
Yep that works no problem.
Also just have to drill out the pivot to 3mm if your peening it.
Sent from my iPhone using Tapatalk
-
I was chatting with my electroplater today and he mentioned they have a new dye color in...... orange!
Im prepping scales this week and I should have hard anodized ORANGE SCALES next week! :D
It will be a dark matte orange. Im super curious to see how it will turn out.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
