Kirks slip joint field test
-
I have to be honest,I've enjoyed it! Having said that,my KST has a perfect tool load for my work,and only lacks a blade,so any slippie makes a good complement. If I weren't carrying a MT, then the slippie cannot be a substitute for a SAK.
-

Looking forward to reading about the riflemans performance. :) -
The big question - which is going to arrive first, the Case or your new RR Barlow?
;) -
@jerseydevil said:
The big question - which is going to arrive first, the Case or your new RR Barlow?
;)I'm betting on the Barlow
Smurfing Case! I'm half hoping it doesn't turn up now!@Grathr said:

Looking forward to reading about the riflemans performance. :)Well the Gunstock had already been in action,appropriately enough,on a shooting range yesterday,but I'll post the details in the correct place in a bit
-

The Case arrived!
The Case arrived!!
The Case arrived!!!

-
Awesome!

-
ITS SO NICE! :ahhh :ahhh :ahhh
-
So now that I've calmed down a bit,and stopped running around the corridors of Blamington Hall,let's get back to task...
The first thing about the Gunstock that is of note is that both blades have a half stop. I'm not sure if I like this or not,but as the week goes on I'll probably get used to it. Fit and finish are generally good,better than the Peanut. This is most noticeable where the scales meet the bolsters. The scales are a joy,as the checking is deep,giving the knife a reassuring grip in the hand. There is one noticeable flaw on one of the brass liners

Not a big thing at the price,and TBH only really noticeable if you go looking for faults. To me,it adds a bit of character

My Gunstock has two bugbears,one May end up being serious,one trivial. The serious one is with the smaller blade. Both blades have a very positive snap to them,and the first stage of opening to the half stop is rather stiff. On the smaller blade it might end up being a nail breaker. I ended up having to use the large blade for dirty cutting today,as my thumb was still wrapped in a plaster after getting a love bite from from my Alox Electrician yesterday,and as such,I didn't have enough nail showing to get into the nick

The trivial issue is the little Winchester(or Henry,or Marlin or whatever) inlay. It's not as nicely executed as the the Rough Rider badge on the Peanut,or as nice as the Long Rifle inlay on my Rifleman Muskrat. Trivial I know,but there you go!
The Gunstock took up its duties on Sunday morning in time for a trip to Sheprith for a HFT competition. It's only call to arms was to help remove the Sellotape I'd been using to hold the crono on the silencer of the Ultra. Not a big task,but undertaken in temperatures close to 0 centigrade,while wearing a bulky thinsulate glove,albeit with my digits exposed. The Gunstock was nice and easy to handle,not too conspicuous,although,given all the guns around,knives don't tend to be an issue.
Today seen some light boxing,before a clean,and use in the kitchen for chopping veg for tonight's dinner. The longer blade and handle makes for greater ease of handling compared to the Peanut,and despite its quirks,it may well be another winner.
Watch this space!
-
-

The Case arrived!
The Case arrived!!
The Case arrived!!!

4900 posts and we have to explain this to you?
PICTURES, MAN, PICTURES!!!!!! ;)
the shame......:D
-
What is it cLMf always says at this point

Oh yeah!

-
Good news about the Case. :D It is, by the way, TOTALLY your fault that I find myself carrying a Vic Pocket Pal today. ;)
-
Only a Pocket Pal? I'll have to send you a Rough Rider

-
-
Very nice.
sent from Nate's mobile
-
Nice! I like the blonde bone, my CV small Texas Jack has it.

-
-
Is that Stockman CV or stainless Gareth? I have the same size and frame in CV......
-
@jerseydevil said:
Is that Stockman CV or stainless Gareth? I have the same size and frame in CV......CV. Takes a nice patina if you cut some apples. :D
-
Well,end of the second week. As I'm sure you've all noticed there's not been a lot to report,as it's been quite a quiet week at work.
I'd mentioned that the small blade was very stiff,going on for a nail breaker. In truth,if you go the right way it's stiff,but not impossible,but...when your working,you don't necessarily have time to be that precise. I ended up just using the large blade :(
My basic findings for the Gunstock are these: The knife is good,but if your buying one,you'd do well to have a play with one in the shop. Mine qualifies as a fail,but at £12 it's not a big deal. And as far as actual fails go,it's not all that much of a fail,I'd still gladly slip it into my pocket. However,the a Peanut is still the big winner so far.
Frustratingly,it's the China Buck next. Nothing wrong(yet) with the Buck,but I'm itching to get the Case into play :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



