What's your latest SAK?
-
Dreams really do come true!!! :ahhh :ahhh :ahhh
And the Sailor's main blade has a tang stamped 85! :ahhh

So where the heck are y'all finding hauls like this?!?
Color me jealous, sweet find!

That was bought here on the forum I think.
-
Got myself a Pocket Pal yesterday. Turns out both the blades are not what I expected. :-\ Comparing it to the blade on the Waiter, the large blade is a little less deep and has a bit less belly than the standard 84mm.

What really surprised me though, was the size of the small blade at 3cm! It gave me a flashback of Heathrow cutlery. :D Here it is next to the 91mm small blade of my Explorer:

It is shorter than the blade on a Classic! Same thickness as the 58mm knife (1.0mm).
-
@sticktodrum said:
Dreams really do come true!!! :ahhh :ahhh :ahhhAnd the Sailor's main blade has a tang stamped 85! :ahhh

I have a vintage Pioneer and Farmer with 85 blades ;)
85 must be a good year for vintage red Alox
-
@Dr Gonzo said:
Dreams really do come true!!! :ahhh :ahhh :ahhh
And the Sailor's main blade has a tang stamped 85! :ahhh

I have a vintage Pioneer and **Farmer with 85 blades **;)
85 must be a good year for vintage red Alox
Man, that must be heavy...

-
@Dr Gonzo said:
...
85 must be a good year for vintage red Alox
I'm thinking it was a good year for new old stock. ;)
-
@Dr Gonzo said:
I have a vintage Pioneer and **Farmer with 85 blades **;)
85 must be a good year for vintage red Alox
Man, that must be heavy...

Now I want to make one with 85 blades just for a photo. :D -
-
@Dr Gonzo said:
I have a vintage Pioneer and **Farmer with 85 blades **;)
85 must be a good year for vintage red Alox
Man, that must be heavy...

Now I want to make one with 85 blades just for a photo. :D
-
@Dr Gonzo said:
I have a vintage Pioneer and **Farmer with 85 blades **;)
85 must be a good year for vintage red Alox
Man, that must be heavy...

Now I want to make one with 85 blades just for a photo. :D
I counted in my parts box im a little short, only 72 91mm blades. :D
-
[quote author=Dr Gonzo link=topic=21658.msg829927#msg829927 date=1389886587]
I have a vintage Pioneer and **Farmer with 85 blades **;)
85 must be a good year for vintage red Alox
Man, that must be heavy...

Now I want to make one with 85 blades just for a photo. :D
I counted in my parts box im a little short, only 72 91mm blades. :D
[/quote]Well then use 72, no-one is going to count them anyway
-
Just got a yellow Wenger Evo 18. Lovely.

-
@Spatha said:
Got myself a Pocket Pal yesterday. Turns out both the blades are not what I expected. :-\ Comparing it to the blade on the Waiter, the large blade is a little less deep and has a bit less belly than the standard 84mm.
What really surprised me though, was the size of the small blade at 3cm! It gave me a flashback of Heathrow cutlery. :D Here it is next to the 91mm small blade of my Explorer:

It is shorter than the blade on a Classic! Same thickness as the 58mm knife (1.0mm).
I felt the same when I got the pocket pal a while back. Not sure where the picture is but I had it compared the a classic blade and the classic blade is bigger. ::)
-
[quote author=pfrsantos link=topic=21658.msg829931#msg829931 date=1389887353]
[quote author=Dr Gonzo link=topic=21658.msg829927#msg829927 date=1389886587]I have a vintage Pioneer and **Farmer with 85 blades **;)
85 must be a good year for vintage red Alox
Man, that must be heavy...

Now I want to make one with 85 blades just for a photo. :D
I counted in my parts box im a little short, only 72 91mm blades. :D
[/quote]Well then use 72, no-one is going to count them anyway
[/quote]Challenge accepted! :D My pin stock is in 12 inch lengths so the biggest I can make is a foot wide 91mm. Lets see what that looks like.. gimme an hour...


-
[quote author=Syph007 link=topic=21658.msg829989#msg829989 date=1389892615]
[quote author=pfrsantos link=topic=21658.msg829931#msg829931 date=1389887353]
[quote author=Dr Gonzo link=topic=21658.msg829927#msg829927 date=1389886587]I have a vintage Pioneer and **Farmer with 85 blades **;)
85 must be a good year for vintage red Alox
Man, that must be heavy...

Now I want to make one with 85 blades just for a photo. :D
I counted in my parts box im a little short, only 72 91mm blades. :D
[/quote]Well then use 72, no-one is going to count them anyway
[/quote]Challenge accepted! :D My pin stock is in 12 inch lengths so the biggest I can make is a foot wide 91mm. Lets see what that looks like.. gimme an hour...
[/quote]Oh this should be good.

-
Ok... so it might take longer than an hour.. but now I gotta finish!


-
Perhaps several Pioneers in one package...in case you need to cut something more than once. :P
Today's post brings the ol' notion of one's cup runnething over!


:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

