Show off your Sak mod's!
-
Found a very old (1940's???) Vic all beaten and abused in the TSA resale bin. Decided to turn it into a functional vintage edc knife. As it's difficult to find exact period replacement parts for the corkscrew, large and small blades, and scissors, I went with what I had on hand: a Wenger corkscrew, and contemporary 91mm Vic scissors. As the scissor backspring was broken too, I swapped the spring for the saw to the scissors, reground the profile of the handle end of the spring, and made a custom brass spacer as the spring wasn't thick enough. The small blade I turned into a flat Phillips driver, similar to that on some Wengers. The Large blade reprofiled nicely, it's hard to really tell it's now about 1/4 inch shorter than originallly.
The scales were very difficult to remove without slightly damaging the rivet holes. I filled the damage with JB weld, and that it mostly hidden by the mushroom heads of the rivets.
A general tidy up, some tlc, other general tool renovation and cleaning, and finally a good polish. Possibly the most fiddly job was the final one: grinding/sanding down a modern Vic toothpick and tweezers to fit the skinny slots on the '40's knife.
I still have to secure one edge of the Vic shield, which is lifting slightly from the scale......any ideas about what adhesive to use, and how best to do it?? -
Nice! Are the modern tools compatible with this old models?
-
Super glue maybe. Never really tried to glue the shield done. A clear epoxy might work too.
sent from Nate's mobile
-
@Sr.Multiherramienta said:
Nice! Are the modern tools compatible with this old models?Large blade is quite a bit thicker than a modern 91mm vic main blade. Also, all the pivots on the knife were 2.2mm, not 2.5mm. Openers are thicker too, and the can opener sits at q totally different angle when closed than the bottle opener. New scissors fit the knife OK, but the spring needs reworking, and the spacer I mentioned for thickness.
-
@ducttapetech said:
Super glue maybe. Never really tried to glue the shield done. A clear epoxy might work too.sent from Nate's mobile
I am leaning towards epoxy, as Super Glue can have sometimes a nasty effect on some plastics.
-
True. I have used it on loose scales and it has been ok, not sure about the old scales.
sent from Nate's mobile
-
@neillcurrie said:
I am leaning towards epoxy, as Super Glue can have sometimes a nasty effect on some plastics.With transparent epoxy you can make a great job using something to change it's color. Simple candle soot makes a great black epoxy, I used it with very good result to fix black vic scales. It's a matter of find different substances for different colors. Any idea for red?
Paprika? :D
-
@Sr.Multiherramienta said:
Any idea for red?Paprika? :D
BLOOD!!!!! >:D >:D >:D
-
@neillcurrie said:
I am leaning towards epoxy, as Super Glue can have sometimes a nasty effect on some plastics.With transparent epoxy you can make a great job using something to change it's color. Simple candle soot makes a great black epoxy, I used it with very good result to fix black vic scales. It's a matter of find different substances for different colors. Any idea for red?
Paprika? :D
What about taking a scale exactly like the one you are trying to epoxy-match, and creating a bunch of perfectly-colored powder by dremelling it to death with a sanding cylinder?
-
Decided to join the forum after doing a search for modified SAKs.
This thread has so many great modifications and there's clearly many talented people on this forum!!
Picked up my first Alox a few weeks ago and have found the Cadet and Farmer to be very useful.
After seeing some of the mods over at EDCF, I decided to try a few of my own mods.I started with a standard 58mm classic and added the blade from a Spyderco Honey Bee, a clip from a Zebralight SC52, and a green tritium locator under the clip. Also made the brass scales and liner.
Looking forward to working on an 84 and 93mm that I stripped down and started brass scales and liners for next.
Anyway, heres a fews pics. Still have a lot of work to do to complete it, but it works.
Looking forward to seeing more mods from you talented and creative people!




.
-
@dafabricata that is a fantastic mod you've done there

-
@dafabricata said:
Decided to join the forum after doing a search for modified SAKs.This thread has so many great modifications and there's clearly many talented people on this forum!!
Picked up my first Alox a few weeks ago and have found the Cadet and Farmer to be very useful.
After seeing some of the mods over at EDCF, I decided to try a few of my own mods.I started with a standard 58mm classic and added the blade from a Spyderco Honey Bee, a clip from a Zebralight SC52, and a green tritium locator under the clip. Also made the brass scales and liner.
Looking forward to working on an 84 and 93mm that I stripped down and started brass scales and liners for next.
Anyway, heres a fews pics. Still have a lot of work to do to complete it, but it works.
Looking forward to seeing more mods from you talented and creative people!




.
Good to see you around here mate!!! I've seen some of your work over EDCF and you always amazed me, so I can't wait to see what you can come up here at MT.O.
BTW welcome to the forum I hope you're having a good time here!!!
-
Thanks guys and it's nice to be here!

Hoping to learn more and be able to add to the forum.

-
That is a sweet mod!
that's us mobile
-
@dafabricata said:
Thanks guys and it's nice to be here!
Hoping to learn more and be able to add to the forum.

Welcome to the forum
That is an interesting mod, and I look forward to future mods. I'm sure you'll add to the forum in fine fashion based off this mod 
-
Welcome aboard!
That is a nice and original mod you did!
I´m looking forward to more.
And btw, I like the picture background with teh stamped 58 mm! -
@neillcurrie said:
What about taking a scale exactly like the one you are trying to epoxy-match, and creating a bunch of perfectly-colored powder by dremelling it to death with a sanding cylinder?Mmm... perfect? That sounds like a really great idea.
-
ha! That little 58mm sypderco was deceiving at first, it looked like a full size folder, then I realized it was the 58mm size. :D Nice job!
-
Very nice mod :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login