Leatherman SIDEKICK / WINGMAN Owners Club
-
Welcome to the club Higgins617 (and the forum)

Nice pic CB

-
I'm in twice over with two Sidekicks from Lynn's 2 Cheap 2 Cheerful giveaway! One of the twins has been liberated from its packaging and already put to work. The saw was used to cut pretty efficiently through some 9mm plywood. I would say that it is about on a par with the Vic 91mm saw.

Sent via just taaap it in... just taaap it in... give it a little tappy... tap tap taparoo.
-

I guess this is the place to show off the Croc as well. It looks more useful than I had thought it would. I can see the scraper blade coming in handy, and it might work for some light prying. It has a bit of a notch at the bottom right which could perhaps be used for popping through tape to open boxes.

It isn't quite as sturdy as something like a pocketwrench II though. The Croc is 2.4mm thick vs the pocketwrench II at 3.2mm. Here are a couple of comparison shots.


-
Despite all the flak it has taken, I have found the croc to be a fairly useful tool. The slimmer size lets it slide right in behind the cards in my wallet and stick out just enough for easy deployment. It has worked wonderfully as a scraping tool(saving my blade) and as a pry tool. It may not be as heavy duty as the piranha it copies but it is still a pretty well functioning tool. Also the small side of the open ended wrench can work as a fairly heavy duty flathead screwdriver in a pinch. Definitely not Leatherman's best work but it is not junk by any means.
-
Anyone see if the croc fits in the bit holder slot behind the MT on say a leatherman wave nylon sheath?
-
Hi guys. New there :)
Can any owners of a Leatherman Sidekick comment on the rust proofness of it?
Thanks -
@MountainKing said:
Hi guys. New there :)
Can any owners of a Leatherman Sidekick comment on the rust proofness of it?
ThanksFirst off, welcome to the forum.

As for the rust proofness, I think most would say "None" :P
The newer LM suffer greatly from it and the Wingman/Sidekick certainly aren't no exception to the rule. :-\
-
Not going to lie, that is kind of saddening. I have really enjoyed using my Sidekick and fully intended to use it as my main set of pliers while fishing but now I'm not too sure. Is this a problem in all of Leatherman's lineup or just these tools?
-
Well it seems more apparent in the wingman/sidekick line, but all of leathermans tools definitely aren't known for there rust resistance. If you want something with much more rust protection (in my opinion) shell out the cash for a swisstool.
-
That's too bad :(. Might be a foolish question because I don't know much, but does BO coating help prevent rust? I still see the Sidekick finding its way into my pocket for a while, maybe just not going to take any salsmurfer fishing trips with me.
-
BO coating can add mild rust prevention, but I wouldn't depend on it helping to much.
For my fishing needs I bought a cheap $2 pair of pliers from OSH and carry a swiss army knife with me. The pliers are cheap and do get rusty on occasion, but are easily cleaned and maintained. The swiss army knife offers very good rust resistance and handles all the scissor, blade, and saw tasks I need depending on which model swiss army knife I bring.
-
Has anyone put their Croc to real use yet?
-
@Higgins617 said:
Has anyone put their Croc to real use yet?It works fine.
-
No I know it works, I carry mine in my wallet everyday. I just haven't really had a reason to put it to the test on anything challenging and was wondering if anyone else had. I actually like it a lot, and the smaller size(than the piranha) is even better for me as it slips away and is hardly noticeable. That mixed with my Sidekick and a Vic Bijou in my coin pocket has taken care of just about every problem I've needed to handle.
-
I gave a Sidekick to my brother (a handy man) two weeks ago as a gift.
Today he came to me with a complain. He was up at high ceiling working on a ceiling fan, the Sidekick was able to pinch the wire but failed give it a clean cut.Since he doesn't care much about the OHO feature, I offered him my ST300. I told him if he can take the size & weight of ST300, it would be a much better workhorse for him than Sidekick and it will last a long time.
-
Thats a common complaint with the Wingman/Sidekick line. They use a different style wire cutter that does not actually overlap which leads to the wire being smashed and not cleanly cut.
-
I have 3 Wingmen. 2 in pieces for parts, 1 that just sits on the shelf
. Gave a fourth to a friend of mine who now carries it daily. I guess the tool load-out is more to his liking than mine. -
i learnt an important lesson yesterday and that was that the wingman clamshell package opener is sharp and can cut you really good if you slip off of the packaging and hit yourself in the palm with it.

my bad for pulling it towards me instead of pushing it away from me
. On the other hand it works well.i luv it when i have it on me at work and someone has some clamshell stuff to open. its a good feeling lol
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login