MP600 Vs OHT
-
Gerbers can be random in quality of design and construction,but the MP 400/600 are safe bankers! You need a 400 next Dude!

-
I can say that I was more than impressed with Gerber and their warranty. The rubber insert thingys on my MP800 had come loose, and one was missing. I contacted Gerber to see if I could buy some, nope, they sent them our no charge!
I bought a Gerber Warrant knife that was a display model and didn't come with a sheath. Contacted Gerber to see if I could buy one, nope, they said they'd send a complimentary one out to me.
I've also had very quick turnarounds with Leathermans warranty department as well.
-
Hmmm, I need rubber bits for my MP800 as well.....
Def
Sent from a digital multitool
-
Very glad to hear you are getting along with the MP600.
What a lot of people seem to be unaware of is that Gerber gear is made in a host of different locations and at many different price points. There are a few Gerbers I wouldn't touch with a barge poll (the Radius for example) and others that easily stand shoulder-to-shoulder with any Leatherman (like your MP600). What this boils down to is that, until folks have tired one of the better Gerbers, I'd always recommend that they give them a decent shot. 
-
I believe that the MP600 has GSA and NATO part numbers , that may invoke higher QC standards .
I would like to see/handle an OHT , but ATM , I don't think I want to buy one sight unseen .
Chris
-
As much as I'd like to think having MILSPEC part numbers would increase the quality level of a doodad, remember that the Australian army issues the new Schrade Tough Tool. ::)
Def
-
My impression of the MP600 is that it is a rattling, clanky, bulletproof design. Almost a tank. It is not pretty. It is not 'slick'. It's not delicate, or subtle. It is a pure-bred TOOL. I don't love the design. I'm not even sure I LIKE the design, but I certainly APPRECIATE the design.
I haven't had a chance for hands-on with the OHT. It looks bulky and I'm not sure the all-oho tools are worth all that extra size/weight. On a number of cases, I'm absolutely certain they're not. I tend to think the Wave/Charge/Surge might be the sweet spot between OHO what is needed, and the rest being internal. This is coming from someone who's never handled the OHT, though, so take it for what it's worth.
-
@Lynn LeFey said:
My impression of the MP600 is that it is a rattling, clanky, bulletproof design. Almost a tank. It is not pretty. It is not 'slick'. It's not delicate, or subtle. It is a pure-bred TOOL.YES, exactly right!
Even more so with your Lazarus!
-
@Lynn LeFey said:
My impression of the MP600 is that it is a rattling, clanky, bulletproof design. Almost a tank. It is not pretty. It is not 'slick'. It's not delicate, or subtle. It is a pure-bred TOOL.
YES, exactly right!
+1 If I need a heavy-duty tool, I grab my MP600. It's a beast that will take a beating and keep coming back for more. At work I see a fair amount of contractors carrying multitools. By far the most common are Gerber MP's, followed by PSTs. I've seen a 600 that has been used as a hammer, and the only issue with it is that it's a bit dinged up. That's it. Tomorrow on the sundries order arriving at work are two MP400's, ordered for two contractors that tried mine out and immediately placed the order. You really can't go wrong with an MP.
It's no Suspension or Radius, that's for sure...... -
@Lynn LeFey said:
My impression of the MP600 is that it is a rattling, clanky, bulletproof design. Almost a tank. It is not pretty. It is not 'slick'. It's not delicate, or subtle. It is a pure-bred TOOL.
YES, exactly right!
+1 If I need a heavy-duty tool, I grab my MP600. It's a beast that will take a beating and keep coming back for more. At work I see a fair amount of contractors carrying multitools. By far the most common are Gerber MP's, followed by PSTs. I've seen a 600 that has been used as a hammer, and the only issue with it is that it's a bit dinged up. That's it. Tomorrow on the sundries order arriving at work are two MP400's, ordered for two contractors that tried mine out and immediately placed the order. You really can't go wrong with an MP.
<u>It's no Suspension or Radius, that's for sure......</u>Thank god for that!!! :D
-
Apart from the retarded design, was the Radius that bad in quality...?

-
@SolomonKane79 said:
Apart from the retarded design, was the Radius that bad in quality...?
It's been years since I held one, but yes I recall it being pretty terrible.

-
I own both a MP600 and OHT the Leatherman gets a lot more belt time mainly because of the spring loaded pliers.
Sent from my iPhone using Tapatalk
-
I own both and I have to say, neither one is my cup of tea. The OHT is better-built with a better feel in hand and *much *better access to tools, but is just too large and boxy to be comfortable in hand or belt carried--- and this coming from someone who EDC's a Surge. The implements themselves are also exactly... average in utility.
The MP600, on the other hand, seems to go out of its way to make deploying implements a multi-step process-- like... "Are you really sure you want a philips driver? I'll let you think about it a bit while you wrestle it out." The somewhat... lackadaisical connection between the handles and plier head makes me hesitant to really bear down.
I suppose, were I forced to choose only between the two, I would end up with the OHT, but I'd still feel somehow short-changed, especially in contrast to a Surge, Charge or Wave.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




