Wave stiff knife
-
Have you tried oiling the pivot? When you say the screw moves, do both move or just one?
-
Both did, Ive just had it apart there and tuned up the screws till I got a good happy medium. Should I put some Locktite on it tomorrow?
-
Serrated Knife on my Surge is a little stiff too, both torx screws move.
Tried oil it but doesn't help. -
@Sparkydave said:
Both did, Ive just had it apart there and tuned up the screws till I got a good happy medium. Should I put some Locktite on it tomorrow?Yes, a little. Too much and you might not get it apart again if you ever need to :)
-
Make sure to use blue, and not red Loctite.
-
^^^
This
when you need to loosen the screws use some heat to "soften" the BLUE loctite. My main blade was very stiff when i first got it but the screws didnt move. With some use it did loosen nicely. I have a BO Wave and the small driver is super tight as are other implements. I oiled it and will use it for the next week to see if it loosens.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login