My new ride.
-
@Heinz Doofenshmirtz said:
Hi everyone, thanks for all your kind words; it's nice to be around again. I'll definitely be stopping by more often. :)Nate, right now I'm most familiar with the bikes that Performance carries, so my first recommendation would be for a Fuji Absolute. They make several variations and their nomenclature system differentiates them by number, with lower numbers being higher end. Typically the frame is the same for all the variations of a model line, with the componentry making the difference between the variations.
Here's the variation of the Absolute I'll recommend:
http://www.fujibikes.com/bike/details/absolute-15It has a triple chainring crank so it's got a very low gear range, 700c wheels with road tires so it will ride smooth and fast, and has enough clearance you can run larger diameter tires at a lower pressure for more comfort. It also has rack mounts so you can put a rack on for panniers and also a set of fenders too. That said, Trek and Specialized also both have similar models; look at the Specialized Sirrus or Crosstrail, or the Trek FX series. They all are what are now called "flat bar road bikes" (instead of hybrid) because they're basically road bikes with a more relaxed geometry for comfort and a mt. bike style bar and controls.
If you're interested in a bike with a drop bar, I'd suggest you look at most any cyclocross bike... they're basically road bikes that are specialized for off-road riding, so they have more relaxed geometry but also can run fatter knobby tires for riding in the rough stuff. Many usually also come with mounts for racks and fenders. Many also have disc brakes which makes them great commuters because the discs work very well for hauling loads and dealing with rain and mud, etc. However, they're a fairly small niche in the bike market, so prices for them tend to be higher. Fuji's entry level crosser is called the Feather CX 1.3 and has an MSRP of $1K so you should be able to find one for around $900 on the floor. I built one for a special order a couple of weeks ago, and they're nice bikes for the money.
http://www.fujibikes.com/bike/details/feather-cx-13Thanks Heinz!
It's been several years since I've looked at bikes and the old divisions have exploded so it's good to hear where to look and what to watch for.

-

Except: Good to see you! Nice bike. -
Good to have you back amigo, and even better to hear that things are going well for you. I'll admit to having been more than a bit concerned when your life plan was to wander off into the woods and live off the land. :P
@Heinz Doofenshmirtz said:
Also, if Grant is interested, I know a lot of you are brothers in cycling, so maybe we should have a dedicated cycling forum? I'll be happy to contribute advice when I can if it happens. Heck, even if it doesn't, I'll do my best to help out with any cycling related questions anyone might have.TTYL!
Just so you know, a bit of MTO trivia for you, the Outdoor Forum actually started off as a Cycling Forum but rarely got much traffic. I'd hoped to bring in some info about all of the cycling tools that are available, but it never ended up going anywhere.
Then I started sharing more and more of my kayaking adventures and I figured it made more sense to have a general outdoors section that would encompass cycling, hiking, rock climbing, kayaking, camping and so on, so we changed it to the Outdoor Edge.
Def
-
Hey guys... thanks again for all your kinds words!
I'm going to be mostly participating in this forum and the break room once in a while.
I talked to the HR manager at Cengage today, and they're sending my hiring papers, etc. in the mail, and my first day will be Feb. 18th.
My salary is going to be more than what I had expected, so I splurged today and bought a new set of wheels for my new bike (her name is Penumbra, BTB). Got a pair of DT-Swiss 29er wheels; 370 disc hubs and 485D rims. I also bought a pair of WTB Team Frequency i19 29er rims last week; they're 90g less per rim, and the ERD on them is 1 mm less than the 485's, so I'm thinking I'll de-lace the 485's from the 370's and replace them with the i19's. (Yes, I'm being a weight-weenie!) I'm also going to get some red alloy spoke nipples for them too; I figure the red will look pretty sweet with the black rims and spokes... >:D
Some of you may remember that in Feb. last year I had an interview for a FT tenure-track position at a place in Vermont called Norwich University. I didn't get the job of course, but I did end up losing big to TSA and some screener thief; I lost the Yeoman I made myself, and my Exec, and my CT-41, along with my Spydie Stretch 2.
A dark, dark day that was...
Well, I'm going to replace them in the next month or three, and will need someone to build a new Yeoman for me. Steve, or Robert, up to the task? PM me when you can. I also have a crazy idea to add a scissors/phillips layer to an orange Hunter XT...Thanks for the info on my idea about a bike specific forum there Boss... How about someone just start a bike specific MT thread in here and you make it sticky? I picked up a nifty little tool at the shop a couple of weeks ago to fill out a smaller and lighter tool kit I carry with me now, instead of my full size behemoth. (I'll start a separate thread about it and post some pics.)
Anyway, it's nice to be back. I won't be participating as much as in the past, but I'm still glad to be able to stop in once in a while and chat. Thanks again to Nate, Nate, Chad, Lynn, Tom, Def, Chako, Enki, Kirk, Gareth, and everyone else! Your fellowship is much appreciated!
Namasté!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




