Identifying old multitool set from Hungary! + other sets of tools
-
Yeah, there are some on eBay right now with crazy high prices too. What I've found is that if you wait long enough, either the price comes down or a cheaper set comes along. :)
-
Fantastic kits! I have never seen the gardener's kit of the fishing kit. Your cases are in vastly better shape than most of mine.I don't keep them stored in the cases as it sometimes traps moisture.
Also: Although that Aerial has beautiful handles I would not store it with any other knives as the celluloid has a tendency to degrade over time and gives off nitric acid fumes which will quickly rust a blade and corrode brass.Once it begins;there is no stopping it.
It is strange but I have some near hundred year old knives with cel handles that are like brand new.I also have some that are perfect on one side and completely destroyed on the other)I will show a pic in a moment).
I have found that they are best preserved when stored in an open area that is dry and not excessively hot.Be careful if you oil the joints ;do not get any oil on the handles and if you do wipe immediately.Do not polish them too hard as friction causes heat buildup.
Here is a picture of an Aerial coke bottle folder that has a decent handle on one side and complete breakup on the other.I replaced the bad one and even though it lost much of it's value at least the knife was saved.Wasn't a big deal as I only paid $4 for the knife.@J-sews said:
Okay, here we go: :)An Aerial Cutlery kit. Aerial's method of holding the blades may not have been as strong as the others, but the knife handles are so pretty




-
Oh WOW.
Very nice sets. Especially @J-sews the fishing kit and second Hubeo.@Ray-S what's producer od set from photo "2012Drower8 14" and "2012Drower8 8"?
This is my photos of some of the sets:
Hubeo:

Ascot:

Japan:

Pfeilring:

This one is my treasure. Not full, but very rare set from my country - Poland, company name Gerlach:


-
Osos:
The red handled set is unmarked but looks to be possibly German.The other set is marked simply"Made in Spain" and the instructions are in Spanish. There is a mark on the case consisting of a shield with a banner on a pole crossing it diagonally and on the shield is what looks like part of a cadeucus on a doctor's emblem.It is a registered trademark(little R in a circle)and says Albacete under it.I'll put up some pictures later. -
Thanks guys

-
@gregozedobe said:
Thanks guys

Agreed. :D This thread is getting bookmarked.

-
Thanks for the advice on the celluloid handles Ray!

Made in Spain? Wow, that is pretty cool. And Osos has one made in Poland, and from Hungary. Nice! Mine are all from either Germany, Britain, United States, or Japan.
-
Wow, great tool sets guys! 8) :)
-
A set I own (but want to get rid of... ::) )
<a href="http://s4.photobucket.com/user/mattschwarz/media/stuff_for_sale/oldtool1_zps6065acc5.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i4.photobucket.com/albums/y102/mattschwarz/stuff_for_sale/oldtool1_zps6065acc5.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s4.photobucket.com/user/mattschwarz/media/stuff_for_sale/oldtool2_zps5f73fce3.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i4.photobucket.com/albums/y102/mattschwarz/stuff_for_sale/oldtool2_zps5f73fce3.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s4.photobucket.com/user/mattschwarz/media/stuff_for_sale/oldtool3_zpse9a923fa.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i4.photobucket.com/albums/y102/mattschwarz/stuff_for_sale/oldtool3_zpse9a923fa.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I don´t advertise my own sales (ok. It´s a lie. I want to.), but have a look:
</topic/44983
-
Ohh most common set :P, but good price.
Maybe you have other sets for sale? -
-
@Osos said:
Ohh most common set :P, but good price.
Maybe you have other sets for sale?I´m sorry - It´s the only set of this kind that I own.
It is in it´s original cardboard box and has no stamps except "Rostfrei" (stainless)
As far as I can tell, it is unused and I won´t use it eiother, so it´s up for sale or trade.
I could be teased with some Gerber stuff easily. -
@J-sews said:
Hey Ray, on your wrench set, are there any numbers stamped on the inside surfaces of the wrench jaws?As a matter of fact there are.I just checked and although the jaws are pretty torn up I can make out the numeral "8" on both jaws. It is probably an assembly number.I have noticed a lot of tools;especially medical instriments that disassemble are numbered to facilitate easy re-assembly.I even have an old French sailor's knife;one of the one's that uses an external spring with a ring to lift the lock mechanism that I disassembled once to attempt to repair it and found not only the blades but the thin liners between the blades were numbered.The handle was one piece of hard wood cut to fit the blades and liners.Even the liners had to go in a specific spot.Here is a poor picture of it.

-
Neat old knife, I like that one!!

And yeah, I've seen that type of numbering too. Here is a farrier's kit (horse hoof trimmer) made in Germany by Hauptner. Every piece, including the handle, is stamped with a tiny number 49

-
From last hunting:
Utica

Richard Sheffield

Imperial:

-
Very good Osos!
At one time I wondered if those three and others like them were possibly all made in the same factory? The "hook" on the end of the tools is very much alike on them. But there are enough small differences that I no longer think this was the case. -
@J-sews said:
Very good Osos!
At one time I wondered if those three and others like them were possibly all made in the same factory? The "hook" on the end of the tools is very much alike on them. But there are enough small differences that I no longer think this was the case.I have found that tools will not interchange even ones made by the same company.Sometimes I will get lucky and find one that will but if you have a set that is missing a tool or handle you are pretty much out of luck.This is especially true of the German manufactured sets.Not only are the hooks different but the thickness of the blades is as well.
I did find an extra handle for one of my German sets and the tools fit in the end but would not fit in the center part where the corkscrew normally goes.I got it in but had an extremely difficult time removing it.
A word of caution:If you are attempting to fit a tool into a handle that it wasn't originally designed for go very carefully and don't try and force it as the backsprings will snap if deflected too far. Don't ask me how I know that. :( -
@J-sews said:
Very good Osos!
At one time I wondered if those three and others like them were possibly all made in the same factory? The "hook" on the end of the tools is very much alike on them. But there are enough small differences that I no longer think this was the case.It is more less like @Ray S write. Hook looks almost same, but between sets are different.
I will try next week to combine different sets, that are same sizes.Regarding simillar sets, check this one:
Only Japana mark

Same one, but with stamp Japan Barlow:


-
Yes, those do look like they came from the same place. (same as the set Lowtech would like to sell) ;)
-
I have 2 new sets:
Wusthof (not every tool was in it):

Mark "Japan", looks like not very nice quality, but with original box and leaflet


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login